Rheonik RHM15 Coriolis Mass Flow SensorIndonesia Industrial Parts

Description

Rheonik RHM15 Coriolis Flow Sensor is an all-purpose meter suitable for liquid processing plants. A wide application flow range capability allows for commonality of installation across numerous lines – a real benefit to owners and operators.

Range: 0.5 kg/min up to 240 kg/min
Pressure: up to 477 bar (6918 psi)
Temperature: -196°C (-321°F) up to +350°C (662°F)
Accuracy: 0.1 % of the rate
Materials: SS 316L / SS 316Ti, Alloy C22 – 2.4602, Super Duplex – 1.4410, Tantalum – UNS R05200
Process Connection: ¾” up to 2″

General Specifications

Nominal Flow (Q???)* 150 kg/min (330.7 lb/min)?
Maximum Flow (Q???)* 200 kg/min (440.9 lb/min)?
Typical Minimum Flow (Q???)* 2 kg/min (4.4 lb/min)?
Serial Tube / Single Path Flow rates Qmax, Qnom, and Qmin for “serial” sensors will be 50% of the above-listed parallel/dual path version.?
Operating Temperature Fluid temperature range options cover applications from -196°C to +350°C (-320°F to +662°F). For integral transmitter versions please refer to the transmitter datasheet?
Ambient Temperature -50 °C to +80 °C (-60 °F to +180 °F) (standard), versions available for installation in a vacuum chamber (-260 °C / -430 °F) or oven (up to +210 °C / +410 °F) (optional)?
Pressure Ratings Up to 882 bar / 112792 psi – dependent upon material?
Electrical Connection Sensor w/o Integral Transmitter
- M20 x 1.5 standard cable entry for JM, SM terminal box versions?
- Optional entries available: ½” NPT or M25 x 1.5 (only for SM) or ¾? NPT (only for SM)?
- M16 x 1.5 standard cable entry for PM terminal box version?
- Max. cable length to remote RHE transmitter 100 m/330 ft?
Sensor Enclosure Materials
- Stainless steel 304 (standard), SS 316 (optional)?
- Coated aluminum terminal box, SS 316 terminal box (optional)?
Enclosure Type Protection class IP66, NEMA 4X (standard), IP66/67, NEMA 4X/6 (optional)?
Wetted Materials
- Flow tubes SS 316Ti, Alloy C22, Tantalum or SuperDuplex?
- Manifolds SS 316L; Seal material (manifold construction): PTFE?
- Standard flanges SS 316Ti, other connections SS 316L?
- Additional/customer-specific materials available upon request?
Process Connections Nearly any – the Rheonik AnyPipeFit Commitment. Consult the factory for types/sizes not listed in this data sheet on the Mechanical Construction pages?
Pressure Rating Compliance
- Europe – PED: Sound Engineering Practice (SEP), Module A2, Module B3.1+C2?
- Canada – CRN: Canadian Registration Number?
Certifications and Approvals
- ATEX / IECEx Approvals for Zone 0, 1 (details see page 17)?
- North American Approvals Class I, Div. 1, 2, Gr. A, B, C, D, Zone 0, 1?
- MID custody transfer approval (OIML R117)?
- American Bureau of Shipping (ABS) Product Type Approval for use on marine vessels?
Testing and Inspection All sensors are hydro-tested, calibrated, and supplied with a traceable calibration certificate. Customized calibration and testing services are available?
Project Documentation and QA, Services
- Rheonik offers a full set of services for large and complex engineering projects. ?
- Typical services offered are, but are not limited to:?Certificates of origin and conformity, mill certificates?Data books including WPAR, WQS, NDT, test & quality plans, functional testing, calibration procedures, customized packing, factory acceptance, etc. ?Painting to project specification ?Start-up and commissioning services on/offshore?
Options
- Enclosure heating for high-temperature applications?
- Cleaning for oxygen service, …?
- For more consult the factory?Applications

Typical applications include:

General Flow Control
Plant Balance
Additive Dosing
Mixing and Batching
Package and Container Filling

Features

The typical measuring range is up to 200 kg/min (440.93 lb/min)
Pressure ratings up to 882 bar (12792 psi)
Temperature ratings from -196 to +350 °C (-320 to +662°F) – extended on request
Mass flow uncertainty down to 0.05%
Repeatability down to 0.05 %
4 kHz measurement updates and response time of less than 10 ms when used with RHE 40 Series transmitters
Accurately measure flow rates down to 2 kg/min
The Rheonik Any Pipe Fit Commitment provides custom process connection type and size flexibility on any meter to suit your existing plant, saving time and expense on installation costs
Compact design with minimal pipeline footprint
Approved for use in hazardous areas
SS 304 Stainless steel enclosure, SS 316 optional
Integral and remote transmitter versions are available

Mechanical Construction

Sensors are manufactured with two internal measurement tubes arranged side by side. In parallel or dual path sensors (order code Pxx), these tubes are connected in parallel and the flowing fluid is split equally between them. In serial or single-path sensors (order code Sxx), the internal tubes are connected end to end, creating a single path through which all fluid flows.

Manifold designs have a removable inlet/outlet manifold block and utilize selectable seals between the manifold and sensor body. In sealless designs, the measurement tubes are continuous between the process connections and do not have seals. Manifold designs offer shorter delivery lead times and may have a lower pressure drop than sealless designs for the same flow rate.

Performance Data

Flow Measurement Uncertainty
- Selected Sensors down to ±0.10 % ¹ of rate (Gold Line)
- Standard Sensors down to ±0.15 % ² of rate
Flow Measurement Repeatability: Down to ±0.05 % of the rate
Temperature Measurement: Better than ±1 °C
Density Calibration (Liquid)
- Selected Sensors down to ±0.0005 kg/liter (Gold Line)
- Standard Sensors down to ±0.0025 kg/liter

Measurement Tube Pressure Ratings

The maximum pressure (Pmax) of a sensor is determined by its lowest-rated part. The lowest rated part can be either the measurement tube (Pmax indicated below), the connection block/manifold
(Pmax indicated in the mechanical construction section) or the process connection (for Pmax see published standards or manufacturer information).

Uncertainties and Flow Measurement Turn-down

All uncertainty statements refer to reference conditions – the mass flow of water, 18 – 24 °C, 1 – 3 bar in a standard temperature, pressure, and material configuration sensor. The sensor can be used to measure gas – uncertainty values for gas equal to the liquid value plus 0.3 %. Reference conditions for gas are mass flow of natural gas, 18 – 24 °C, 35 to 100 bar in a standard temperature, pressure, and material configuration sensor.

The turn-down capability from the Qnom of the flow sensor is driven mainly by its zero-point stability. At the very low end of the measuring range, the uncertainty (u) is dominated by zero-point stability. The zero point stability of a standard sensor is 0.02 kg/min (0.0441 lbs/min). The zero point stability of a Gold Line sensor is 0.012 kg/min (0.0265 lbs/min).

For flow Q ? zero stability / (calibration uncertainty/100) u = calibration uncertainty
For flow Q < zero stability / (calibration uncertainty/100) u = (zero stability/Q) x 100

Uncertainties from environmental and process conditions

If sensors are not zeroed at operating conditions, minor additional uncertainties can arise from elevated temperatures and pressures: ± 0.00008 % of maximum flow per °C and ±0.0005% of maximum flow per bar.
Process temperature effect on density: additional uncertainty of ±0.0005 g/cm³ per °C difference from calibration temperature with standard density calibration and of ±0.00009 g/cm³ per °C difference from calibration temperature with enhanced density calibration. This effect can be mitigated by a simple field density adjustment at operating conditions.
Process pressure effect on mass flow: The effect of pressure on flow measurement is 0.0001 % of the rate per bar. Compensation is possible by pressure sensor input (analog input or digital write) or manual value entry into the transmitter.
Process pressure effect on density: The effect of pressure on density measurement is 0.000075 g/cm³ per bar. Compensation is possible by pressure sensor input (analog input or digital write) or manual value entry into the transmitter.

Source: www.rheonik.com

Read More Articles: