The LMag-i1 flow meter incorporates the latest digital signal processing (DSP) to achieve the performance of an in-line magnetic flow meter with the flexibility and easy installation of an insertion meter.
Exceptional performance and value
Cost-effective insertion-style design provides the accuracy and reliability found in magflow meters.
Three programmable pulse outputs and one analogue output are provided with each meter.
User-friendly backlit display & user interface
‘Smart Button’ technology in the easy to read, backlit display simplifies page navigation and programming, eliminating the need for configuration tools.
Simple installation and commissioning
Factory programmed and ready for use upon delivery. All process data and programming functions are accessible via front panel display and keyboard.
Ideal for HVAC applications
Interfaces directly with your Building Management System to handle the demanding flow measurement requirements in modern HVAC management applications. Hand insertable up to 27 bar and hot tappable so system shut down is not required.
Table of Contents
The LMag-i1 features a single monolithic coil designed to create a uniform magnetic field across the entire pipe, essential for accurate flow measurement in installations with less than ideal flow profiles.
- ±1% of reading – from 0.3 to 6 m/s
- Chilled water
- Hot water
- Domestic water
- Condenser water
- HVAC hydronic applications
- Clean process flow applications with conductivities >25 μS/cm
|Accuracy||± 1.0% of reading from 0.3 to 6 m/s
± 0.5% of reading at the calibrated velocity
± 3 mm/s at flow rates less than 300 mm/s
|Input power||24 VAC||40 VA @ 20 to 28 VAC|
|24 VDC||50W @ 24 VDC ± 10%|
|I/O Signals||One (1) isolated AO, 4-20 mA or 0-10 VDC
One (1) frequency
One (1) pulse
|Electronics enclosure||Cast aluminum IP66 enclosure with display, integral mount|
|Display:||73mm STN monochrome screen with back light, 128×64 dot matrix|
|Ambient conditions:||-30ºC to 120ºC|
|Programming||Menu driven via four (4) programming keys|
|Electrical connections||Input power:||Pluggable terminal block, for use with 0.5 to 1 mm wire|
|I/O:||Pluggable terminal block, for use with 0.4 to 0.8 mm wire|
LMag-i1 Fixed insertion flow sensor
|Sensing method:||Single monolithic coil extending across entire pipe diameter|
|Operation:||Pulsed DC coil with enhanced DSP|
- Operating Conditions
|Fluid temperature range:||-30ºC to 120ºC|
|Fluid pressure range:||0 to 27 bar|
|Minimum conductivity:||25 µS/cm|
|Pressure drop:||Less than 35 mbar in a 6” line at 3.6m/s|
- Construction materials
|Flow tube:||Acetal POM/ Polysulphone|
|Stem assembly/electrodes:||316/316L SS|
|Hot tap adaptor:||316/316L SS|
- Process connection
1 inch NPT