Paragon PS Series Split Case Centrifugal Pump

General

The Paragon PS Series pump is a double suction, horizontal, split case centrifugal pump available in 46 sizes from 5×3-8 (125×80-210) to 36×36-31 (900×900-780) for heads up to 656 feet (200 m) and flows up to 80,000 GPM (18,000 m3/hr.).

The Paragon PS Series pump  has a maximum operating pressure of 435 PSI (30 bar) and a maximum operating temperature of 221° F (105° C).

The Paragon PS Series pumps are used for air conditioning, cooling towers, irrigation and drainage pumping stations, power stations, industrial water supply systems and fire fighting applications (hydran pump).

Application

  • Waterworks
  • Irrigation
  • Air-Conditioning Systems
  • Drainage pumping stations
  • Powerstations
  • Industrial water supply systems
  • Fire fighting applications in refineries.

Construction

Pump Casing

The casing is axially split, which permits removal of the complete rotor without moving either piping or motor. Pumps generating high heads have double volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads. Replaceable wear rings protect the casing at the impeller running clearances. High head pumps are also fitted with replaceable impeller wear rings.

Impeller

The closed impellers have double curved vanes. The double suction design gives practically zero axial forces. Each impeller is statically and dynamically balanced according to ISO 1940.

Bearings

On both sides this pump has grease lubricated deep groove ball bearings, sealed for life, optionally oil lubricated.

Shaft Seal

Uncooled soft-packed stuffing box or uncooled single acting, unbalanced mechanical seal, according to DIN24960, independent of direction of rotation.

For operating pressure greater than or equal to 232 psi (16 bar): balanced mechanical seal. (optional)

Specification

Discharge Diameter  80 ~ 600mm
Max Capacity  2000l/s
Max Head  170m
Max Pressure  16 Bar Standard, 25 Bar on Request
Max Temperature  105ºC

Material

Standard
Bronze Fitted
Standard
Cast Iron Fitted
Stainless Steel
Construction
Casing Cast Iron Cast Iron SS304/316 SS
Impeller Bronze Cast Iron SS304/316 SS
Shaft SS420 SS420 SS304/316 SS
Shaft Seal Single Unloaded Mech Seal

Download Datasheet: Paragon PS Series Centrifungal Pump

Share