H2Scan HY-ALERTA 600B Fixed Area Hydrogen MonitorIndonesia Industrial Parts

H2Scan HY-ALERTA 600B Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.

They are designed for either ceiling or wall mount and have RS422 capability that extends the interface from the sensor to the controller to several hundred feet. H2scan’s hydrogen-specific sensor technology has no cross-sensitivity to any other combustible gases, thus eliminating false positive alarms and increasing system reliability.

H2Scan HY-ALERTA 600B Applications

Battery Rooms
- H2 monitoring during lead acid battery charging

Hydrogen Cooled Generators and Turbines
- Leak detection during operation

Control Rooms / Analyzer Buildings
- Fixed Area Hydrogen Monitor : Control Rooms / Analyzer Buildings

Industrial Gas Supply and Hydrogen Production
- Industrial Gas Supply and Hydrogen Production

Laboratories
- General hydrogen safety monitoring

Furnaces and Manufacturing
- Area monitoring for unburnt hydrogen

Alternative Energy
- Hydrogen refueling station safety monitoring fuel cell and electrolyzer leak monitoring

Other Applications
- General area monitoring wherever there is a risk of hydrogen accumulation

Advantages

Highly reliable
Wide hydrogen-specific detection range
Low life cycle cost
Works in air, oxygen, or inert gas background
Easy to install and operate
Does not degrade over time
Minimal maintenance required
Non-consumable solid state technology
No cross sensitivity to combustible gases
Field-configurable settings
Not vulnerable to poisoning like other detectors
Will not saturate with exposure to hydrogen

H2Scan HY-ALERTA 600B Configuration Details

Hydrogen Sensitivity Range: 0.4% to 5.0% hydrogen by volume, (10% to 125% hydrogen lower flammable limit)
Accuracy: ±(0.03 x indication + 0.2) percent hydrogen by volume
Typical Response Time: T90 of 60 sec maximum
Ingress Protection: IP64 capable
Calibration Interval: 90 days
Product Life Expectency: 10 years
Operating Temperature Range: -20ºC to 40ºC
Storage Temperature Range: -40ºC to 80ºC
Operating Humidity: 0% tp 95% RH
Calibration Background Gas: Air
Input Voltage Range: 10VDC to 26VDC
Input Power: 15W max
Standard Analog Outputs:
- 0 VDC to 5 VDC or
- 4 mA to 20 mA
- Custom ranges available
Serial Communication Options: RS-232 or RS-422
Relay Contacts:
- Two programmable 30 VDC / 1 A SPDT relays with both normally open (N.O.) and normally closed (N.C.) contacts.
- One programmable 30 VDC / 1 A SPDT relay with normally closed (N.C.) contacts.
Dimensions:
- Total Length (600B): 8.2 in.
- Mounting Bracket Length: 5.6 in.
- Total Width: 4.4 in.
- Mounting Bracket Width: 4.0 in.
- Depth: 1.6 in.