Contact Resistance Thermometer TP 30 Hengesbach

Contact Resistance Thermometer TP 30 Hengesbach

The temperature sensors have been specially designed to record the surface temperatures of resting media, e.g. tanks. The pressure with which the movable sensor tip is pressed against the surface (which may be uneven) optimize adaptation to the measuring point and guarantees recording of the surface temperatures during stationary processes, in combination with the head-sensitive, installed Pt100 measuring element.

The system is easy to install via the G½ welding socket, which – depending on the prevailing installation options – can be selected for installation either on top of or flush with the wall of the tank. Thermal conductance paste is recommended to improve heat transmission.

Contact Resistance Thermometer TP 30
Contact Resistance Thermometer TP 30

The resistance thermometers can be delivered either with a directly connected cable or with a stainless steel field housing and can also be used outdoors, as they fall into protective category IP 67. Single or double PT100 temperature sensors according to EN 60751, Class A, guarantee a high degree of accuracy. Optional programmable measuring transducers can be used for longer transmission routes.

Features:

  • no contact with the medium
  • head-sensitive installation of the measuring resistance for optimal temperature recordings
  • the measuring point can be retrofitted
  • optionally with cable connection or head transmitter
  • can be serviced during operation

Specification:

Connection head / housing Stainless stelle field housing H, 1.4301
Cable version: 1 m fixed silicon cable, other types and lengths on request
Protection type EN 60529 IP 67
Process connection G ½ B-threaded connection
∅ 6mm measuring tip, spring-loaded up to 4 mm
Material Stainless steel Material No. 1.4571
Insulation PEEK
Temperature sensor Standard: 1 x 3-wire PT100 according to EN 60751, Class A,
Options: Class B 1/3 DIN or B 1/10 DIN
Single or double PT100 in a 2- or 3-wire circuit,
Single PT100 in a 4-wire circuit
Application temperature -50… + 250°C
Response times Measuring conditions, medium: Water (stationary process)
T50 = 3.5 s, T90 = 11 s – depends on installation situations
Operating pressure p unpressurised
Two-wire measuring transducer programmable Data sheet type TE32, TE41/42, TE52/HART, TE82/Profibus PA
Accessories:
Item No. 06002211 – closed welding socket, ∅ 30 mm, G ½ B-threaded connection, Material No. 1.4571
Item No. 06002059 – open welding socket, ∅ 30 mm, G ½ B-threaded connection, Material No. 1.4571
VARIVENT connection adaptor d = 68 mm

Download Data Sheet: Contact Resistance Thermometer TP 30

Ref: hengesbach.com

Share