gland cableIndonesia Industrial Parts

Conae Gland Cable M 32 (Abu-Abu) Heavy Duty Connector

Conae Gland Cable M32 (Grey) Heavy Duty Connector is a high-quality cable connector designed to secure and protect cables in a variety of industrial applications.

With a heavy-duty design, this connector provides resistance to …

By Inaparts Author

07/01/202507/01/2025

Level Measurement

Bamo PILOTREK Radar Level Measurement

Description

Bamo PILOTREK Radar Level Measurement is a radar level transmitter without contact with the liquid, with protected electronic module integrated in the housing. Compact, this device powered by the 4-20 mA loop is distinguished by its reliability and accuracy. Located above the liquid surface, …

By Inaparts Author

07/10/202014/06/2025

Level Measurement

Bamo BJSC Atmospheric Pressure Balanced

Overview

Bamo BJSC Atmospheric Pressure Balanced is carried out by means of the cable gland, centered below the fitting. For aggressive chemicals, it is recommended to use the model BJSC-A with a PVDF cable gland. A vent filter on the front of housing, insures a …

By Inaparts Author

01/10/202014/06/2025

Level Measurement

Bamo MNR 7 Ex Magnetic Float Level Controller

Description

Bamo MNR 7 Ex Magnetic Float Level Controller housing is IP65 and the cable pass through a cable gland PG11, acc. to Ex specifications. Internal wiring is done on a screw terminal. On the lower end of guide tube, a blocking ring allows to …

By Inaparts Author

17/09/202020/06/2025

Level Measurement

Bamo MNR 7-I Magnetic Level Controllers in Stainless Steel

Description

Bamo MNR 7-I Magnetic Level Controllers in Stainless Steel are actuated when the magnetic float passes in front of; Detection of up to 4 thresholds. The contacts are changeover and bistable: status reverses only when the float passes again in front of. Terminals are …

By Inaparts Author

17/09/202020/06/2025

Level Measurement

Bamo TVI and MINITEV Resistive Level Probes

Description

Bamo TVI and MINITEV with screw terminals and cable gland (Excepted on MINITEV), Fitting: AISI 316 L with PTFE insulator(s), Electrodes: AISI 316 L, 1 to 4 electrodes (according the model) at necessary length. Electrical connection: with end tip to the terminal. A ground …

By Inaparts Author

16/09/202016/06/2025