Saft LSH 20 Lithium BatteryIndonesia Industrial Parts

Primary lithium battery LSH 20 HTS

3.6 V Primary lithium-thionyl chloride (Li-SOCl2) High power and super robust D-size spiral cell

Benefits

High drain/high pulses capable

Superior voltage response

Ability to perform reliably in wide range temperature environments (-60°C to +85°C) with severe vibration/shock constraints

High and stable operating voltage

Superior drain capability

Low self-discharge rate (less than 3 % after 1 year of storage at + 20°C)

Key features

Stainless steel container

Hermetic glass-to-metal sealing l Built-in safety vent

Finish with 5 A fuse

Non-flammable electrolyte

Ability to withstand – axial vibration 20 GRMS 2-100 Hz – radial vibration 30 GRMS 2-100 Hz – sine 30 G peak 30 to 2000 Hz – random 20 GRMS 30 to 1000 Hz l Restricted for transport (Class 9) Main applications l Oil drilling and all downhole high temperature environments l Measure While Drilling (MWD) l Oil and gas well monitoring l Military (ejection seat beacons, …) l Space vehicles l Launchers

Storage

The storage area should be clean, cool (preferably not exceeding + 30°C), dry and ventilated.

Warning

Fire, explosion and burn hazard.
Do not recharge, short circuit, crush, disassemble, heat above 125°C (257°F), incinerate, or expose contents to water.
Do not solder directly to the cell (use tabbed cell versions instead)

Electrical characteristics (typical values relative to cells stored for one year or less at + 30°C max.) Nominal capacity 11 Ah (under 100 mA at +85°C 2.0 V cut-off.

The capacity restored by the cell varies according to current drain, temperature and cut-off)

Open circuit voltage (at + 20°C) 3.67 V

Nominal voltage 3.6 V (under 3 mA at +85°C)

Nominal energy 39.6 Wh (at +85°C)

Pulse capability : Typically up to 3000 mA. (The voltage readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft)

Maximum recommended continuous current 1000 mA (at +85°C, to maintain cell heating within safe limits. Battery packs may imply lower level of maximum current and may request specific thermal protection. Consult Saft)

Storage (recommended) + 30°C (+ 86°F) max (for more severe conditions, consult Saft

Operating temperature range – 60°C/+85°C

(Higher temperature possible. Battery packs may imply lower level (-76°F/+185°F) of maximum current and may request specific thermal protection. Consult Saft)