Saft LS9V 9 Volt Li-SOCl2 Lithium Battery Cell

Saft LS9V 9 Volt Li-SOCl2 Lithium Battery Cell is a high-energy-density primary lithium-thionyl chloride battery pack specifically designed for a wide range of applications requiring low base currents combined with superimposed pulses.¹ This prismatic battery pack yields excellent voltage readings across a wide temperature range of -60°C to +85°C.

Main Applications of Saft LS9V 9 Volt Li-SOCl2 Lithium Battery Cell

Memory back-up
Alarm and security devices
Smoke detectors
Alarm equipment
Industrial electronics
Medical equipment

Key Features

Pack Assembly: Assembled from three ½ AA-sized (and UL-recognized) cells connected in series.
Cell Construction: Component cells feature stainless steel containers and hermetic glass-to-metal sealing.
Housing: Robust plastic sleeve for battery housing.
Terminals: Miniature snap-on terminals for easy connection.
Safety: Non-flammable electrolyte.
Logistics: Non-restricted for transport.
Technical Specifications
Pack Construction: 3 LS 14250 in series
Pack Designation: LS 9 V
Part Number: 0095-567-019
Nominal Capacity: 1.2 Ah (at 1 mA, +20°C, 6.0 V cut-off)
Open Circuit Voltage: 11.0 V (at +20°C)
Nominal Voltage: 10.8 V (at +20°C and 0.1 mA)
Pulse Capability: Typically up to 100 mA
Maximum Recommended Continuous Current: 35 mA (higher currents possible, consult Saft)
Typical Weight: 29 g (1 oz)
Lithium Metal Content: Approx. 0.9 g
The capacity restored by the battery pack varies according to current drain, temperature, and cut-off.
0.1-second pulses, drained every 2 min at +20°C from undischarged cells with 10 µA base current, yield voltage readings above 9.0 V. Readings vary by pulse characteristics, temperature, and cell history. Using a capacitor may be recommended in severe conditions; consult Saft.

Environmental & Storage

Operating Temperature Range: -60°C to +85°C (-76°F to +185°F).⁵ Note: Operation above ambient temperature may lead to reduced capacity and lower voltage readings at the beginning of pulses.
Storage Recommendation: Area should be clean, cool (preferably not exceeding +30°C / +86°F), dry, and ventilated. For more severe conditions, consult Saft.

Warning

Fire, explosion, and burn hazard.
Do not recharge, short circuit, crush, disassemble, incinerate, or expose contents to water.
Do not heat above 100°C (212°F).
Do not solder directly to the battery pack.

For More Information and Price : Saft LS9V 9 Volt Li-SOCl2 Lithium Battery Cell