Signet 2536 Rotor-X Paddlewheel Flow Sensor

Signet 2536 Rotor-X Paddlewheel Flow Sensor

Mudah dipasang dengan kinerja handal yang menyingkat waktu, Signet 2536 Rotor-X Paddlewheel Flow Sensor highly repeatable, sensor kasar yang menawarkan nilai luar biasa dengan sedikit atau tanpa perawatan. Model 2536 memiliki sinyal kolektor terbuka yang siap-proses dengan kisaran aliran dinamis yang lebar antara 0,1 hingga 6 m / s (0,3 hingga 20 kaki / s).

Sensor mengukur laju aliran cairan dalam pipa penuh dan dapat digunakan dalam sistem tekanan rendah. Dapat dikatakan model 2536 ini adalah versi upgrade dari Signet 515 rotor dengan turndown ratio yang lebih besar (66:1).

Aplikasi Penggunaan:

  • Pure Water Production
  • Filtration Systems
  • Chemical Production
  • Liquid Delivery Systems
  • Pump Protection
  • Scrubber Systems
  • Water Monitoring
  • Not suitable for gases

Advantages:

  • Operating range 0.1 to 6 m/s (0.3 to 20 ft/s)
  • Wide turndown ratio of 66:1
  • Open-collector output
  • Installs into pipe sizes DN15 to DN900 (½ to 36 in.)
  • High resolution and noise immunity
  • Highly repeatable output
  • Test certificate included for -X0, -X1
  • Chemically-resistant materials

Specification

General
Operating Range0.1 to 6 m/s0.3 to 20 ft/s
Pipe Size RangeDN15 to DN900½ to 36 in.
Linearity±1% of max. range @ 25 °C (77 °F)
Repeatability±0.5% of max. range @ 25 °C (77 °F)
Min. Reynolds Number Required4500
Wetted Materials
Sensor BodyGlass-? led PP (black), PVDF (Natural) or PVC (Gray)
O-ringsFKM (std), optional EPR (EPDM) or FFKM
Rotor PinTitanium, Hastelloy-C or PVDF; optional Ceramic, Tantalum, or Stainless Steel
RotorBlack PVDF or Natural PVDF; optional ETFE, with or without carbon ?ber reinforced PTFE sleeve for rotor pin
Electrical
Frequency49 Hz per m/s nominal15 Hz per ft/s sinusoidal
Supply Voltage 5 to 24 VDC ±10% regulated
Supply Current<1.5 mA @ 3.3 to 6 VDC< 20 mA @ 6 to 24 VDC
Output TypeOpen collector, sinking 10 mA max.
 Cable Type2-conductor twisted pair with shield, 22 AWG
Cable Length7.6 m (25 ft) can be extended up to 305 m (1000 ft) maximum
Max. Temperature/Pressure Rating – Standard and Integral Sensor
PP12.5 bar @ 20 °C181 psi @ 68 °F
1.7 bar @ 90 °C25 psi @ 194 °F
PVDF14 bar @ 20 °C200 psi @ 68 °F
1.7 bar @ 85 °C25 psi @ 185 °F
PVC12.5 bar @ 20 °C180 psi @ 68 °F
6.9 bar @ 60 °C100 psi @ 140 °F
Operating Temperature
PP-18 °C to 85 °C0°F to 185 °F
PVDF-18 °C to 85 °C0 °F to 185 °F
PVC 0°C to 50 °C32°F to 122 °F
Max. Temperature/Pressure Rating – Wet-Tap Sensor
PP7 bar @ 20 °C102 psi @ 68 °F
1.4 bar @ 60 °C20 psi @ 140 °F
Operating Temperature
-18 °C to 60 °C0 °F to 140 °F
Max. Wet-Tap Sensor Removal Rating
1.7 bar @ 22 °C25 psi @ 72 °F
Standards and Approvals
CE, FCC, NSF (3-2536-PX Only)
RoHS compliant, China RoHS
Manufactured under ISO 9001 for Quality and ISO 14001 for Environmental Management and OHSAS 18001 for Occupational Health and Safety
author

Rudy Wiratama

rudywinoto.com/wmablog.com/flowmasonic.com

Similar Posts