Description Tival Sensors TS-NW3 Level Controller, The TS-NW3 level controler devices are level relays used for monitoring the levels of non-flammable electrical conductive liquids. The supply voltage must be applied to terminals A1 and A2 during operation of the devices. Single-terminal immersion electrodes are used for measuring the level limit values. The test circuit of […]
Description Tival Sensors TS-SG 51 Vibration Limit Switch, The vibrating fork is stimulated by the piezo drive on its resonance frequency. The vibrating fork resonance frequency drops on liquid level covering; this frequency change is interpreted by the internal electronics and changed into a switching signal. Two different electronic types are available: Besides the transistor […]
Description Tival Sensors TS-KNG Joint Lever Transmitter, A swivel-mount magnet is attached to the lightweight joint lever with its floater. Fluid level differentials cause corresponding joint lever deflection. Magnet rotation is detected by an analog hall sensor and altered to a standardized signal by the microcontroller. The fluid level allocation can be set independently and […]
Overview The company TIVAL Sensors GmbH was established in 2005 by Dipl.-Ing. Hartmut Linde. Competence in service, a high grade of quality, short delivery times, and a fair partnership with our customers and vendors are our corporate goals. We started with mechanical pressure switches. The family of FF4 pressure switches stands for an extraordinarily good […]
Descriptions Tival Sensors TS-LSD 30, Electronic level switch. The electronic level switch TST-LSD 30 is designed for level monitoring in a wide variety of applications, such as mechanical engineering, hydraulics and pneumatics or water and pump technology. The TST-LSD 30 operates by means of a resistance measuring chain with reed switches inside the 8 mm […]
Descriptions Tival Sensors TS-KFA 2, TDR Level Sensor. This measurement method provides direct, accurate and highly reliable continuous level measurement and level detection in almost any media – regardless of changing process conditions (such as density, conductivity, temperature, pressure, humidity and dust). The sensor can be used in small tanks as well as in large […]