HSB Series 690V TE Connectivity

HSB Series 690V has certified approval according to TÜV, UL as well as CSA for Flame-retardant materials to UL94-V0 with screw terminal.

HSB Technical Characteristics

HSB Series 690V Specifications

Working current		35 A max (See current carrying capacity)
Working voltage	Conductor – ground	400 V
	Conductor – conductor	690 V
Test voltage arms		6KV
Pollution degree		3
Insulation resistance		≥10¹⁰Ω
Contact resistance		≤1mΩ
Material	Insert	Polycarbonate
	Contact	Copper alloy
Temperature range		-40°C… +125°C
Flammability acc. to UL94		V0
Working voltage acc. to UL/CSA		600V
Mechanical working life-mating cycles		≥500
Terminal type		Screw Terminal
Wire gauge	mm²	1.5-6 mm²
	AWG	16-Okt
Tightening/test torque		1.2 Nm

Contacts

Surface: Hard silver-plated
Contact resistance: ≤1mΩ

Hoods & Housings

Material: Die-cast aluminium
Surface: Powder-coated (RAL 7037)
Locking element: Stainless steel, steel zinc plated
Temperature range: -40°C… +125°C
Degree of protection acc. to DIN40 050: IP65

Specifications: DIN EN 60 664-1 & DIN EN 61 984
Number of contacts : 6,12(2×6) + PE

Another Article:

Portable Gas Analyzer Monoxor XR Bacharach
Electrical Connector Heavy Duty Sibas
Mercotac Four, Six, and Eight Conductor Electrical Connectors
Mercotac Three Conductors Electrical Connectors
Mercotac Rotating Electrical Connectors

Current Carrying Capacity

The current-carrying is limited by the maximum temperature of materials for inserts and contacts including terminals. Control and test procedures according to DIN IEC 60512-3.