Power Connectors Amphenol HP Series

HP Series Power Connectors Amphenol are suitable for AC power supply where a latch locking connector is required. They are rated at 25 A / 250 Vac. Connectors are keyed and color-coded for power-in (Blue) and power-out (Grey).

Features:

Quick-release, vibration resistant latch lock
3 pole
Screw Terminals or Solder Tab 3/16”
Chuck type cable clamp
25A Current rating
Thermoplastic housing
Industry-standard mating
UL, cUL recognized components

Specification

GENERAL CHARACTERISTICS	Number of contacts	2+PE
	Termination	Screw or Solder Tab 3/16”
	Flammability	UL94V-0
	Environmental	Complies with EU RoHS 2 Directive 2011/65/EU
ELECTRICAL CHARACTERISTICS	Rated Operating Voltage	250VAC
	Test Voltage AC RMS	3200V
	Current carrying capacity	25A
	Typical Contact Resistance	≤3mΩ
	Insulation Resistance (initial)	≥2GΩ
	Insulation Resistance (after damp heat test)	≥1GΩ
CLIMATIC CHARACTERISTICS	Protection Class	IP20
CLIMATIC CHARACTERISTICS	Operating Temperature	-25˚C to +75˚C (-13°F to +167°F)
MECHANICAL CHARACTERISTICS	Weight**
	– Chassis Connector	12g (0.026lb)
	– Cable Plug	32g (0.070lb)
	Typical Cable retention force	200N (Subject to cable material and O.D.)
	Cable O.D range
	– Blue Chuck Clamp	5mm – 7.5mm (0.19” – 0.29”)
	– Black Chuck Clamp	7.5mm – 15mm (0.29” – 0.59”)
	Conductor Size
	– Screw Terminals	2.5mm² (AWG14)
MATERIALS		PA66 GF30 / Black
	Insulators	PA66 GF30
	Cable Boot / Backshell	Santoprene / PBT
	Cable Clamp (Chuck)	P.O.M
	Contact Plug
	– Material / Plating	Brass / Silver
	Contact Chassis
	– Material / Plating	Phosphor Bronze / Silver