Bamo Metallic CDV Flow Controllers and Indicators

Bamo Metallic CDV Flow Controllers and Indicators

Bamo Metallic CDV Flow Controllers and Indicators is used to monitor and visualize the flow-rate of a fluid free of suspended particles.

Bamo Metallic CDV Flow Controllers and Indicators Features:

  • Operates in all positions
  • Flow indicators, plus 1 flow contact
  • Versions: Stainless steel or brass
  • Pressure max. 16 bar
  • Flow ranges from 0.005 up to 150 l/min

Operation:

The fluid drives a magnetic orifice plate inside the cylindrical measuring tube. A spring balances its movement and allows to operate in all positions. The upper edge of the diver corresponds to the flow-rate on the graduated scale (in ml/min or l/min). A Reed contact, N.O. with no flow, is adjustable all along the scale, its status changes with the passage of the plate.

With these equipment, the CDV operates independently of the pressure, even in low flow rates.

Application:

Control and indication of flow-rate in cooling, high pressure pipings, dry-run pump prevention, etc.

Another Article:

Bamo Metallic CDV Flow Controllers and Indicators Specification:

Pressure limits 16 bar for fittings ¼” & ½”; 10 bar for fittings 1”
Temperature -20 … +100 °C
Measuring scale unit l/min of water at 20 °C
Accuracy ±10 % F.S.
Pressure drop 0.02 … 0.4 bar (BSP 1”)
0.2 … 0.3 bar (BSP ½”)
0.2 … 0.2 bar (BSP ¼”)
Switch N.O. without flow
Hysteresis About 1.5 mm
Connection DIN 43650 plug-in socket

Brass version

IP 65
Anodized aluminum
Body
Fittings & orifice plate Nickel plated brass
Spring AISI 316 Ti (1.4571)
Seals NBR
Magnet Ferrite
Glass tube Glass DURAN® 50

AISI version

Anodized aluminum
Body
Fittings, orifice plate AISI 316 Ti (1.4571)
Spring AISI 316 Ti (1.4571)
Seals FPM
Magnet Ferrite
Glass tube Glass DURAN® 50

Download Data Sheet: Flow Controllers and Indicators, Metallic CDV

Ref: bamo.eu

Share