Kofloc DF-350C Digital Mass Flow Meter is a digital mass flow controller with an integral indicator that operates on a 24-V power supply. It offers features equivalent to the DF-250 Series designed for up to 50 SLM.
Kofloc DF-350C Features
- High accuracy (±1% S.P.), fast response (≤ 1 sec in all ranges)
- Support of multiple ranges and multiple gases
- Communication functions installed as a standard feature (RS485)
- RoHS CE standard compliant
- Driven by a single 24 V DC supply voltage
- With or without indicator (selectable)
- Selectable Input/output signal
Specification
Sensor type | Thermal sensor | ||
Valve type | Normally closed proportional solenoid valve | ||
Applicable gases*1 | N2, Air, H2, He, Ar, O2, CO2, etc. (Gases not specifically mentioned here are subject to calibration for N2 equivalent.) | ||
Flow range*2 | 10 SCCM to 10 SLM | 20 to 50 SLM (20 to 30 SLM for CO2) | |
Control range | 2 to 100% (F.S.) | ||
Response*3 | Total flow rate control range ≤ 1 sec (within ±2% F.S.) | ||
Accuracy*4 | ±1.0% F.S. | ||
Repeatability | ±0.25%F.S. | ||
Operating differential pressure*5 | 50 to 300 kPa (100 to 300 kPa for Ar and CO2) | 100 to 300 kPa (150 to 300 kPa for Ar and CO2) | |
Inlet maximum pressure | 500kPa(G) | ||
Proof pressure | 980kPa(G) | ||
External leak rate | ≤1.0 x 10-8 Pa·m3/sec (He) | ||
Temperature | Working temp. | 5 to 50℃ | |
Accuracy guaranteed temp. | 15 to 35℃ | ||
Allowable storage temp. | -10 to 60℃ | ||
Allowable operating humidity | 10 to 90% RH (without dew condensation) | ||
Materials of the gas contact part | SUS316, SUS316L, magnetic stainless steel, Ni, PTFE, PCTFE, and FKM | ||
Electrical connection | D-sub 15-pin male, high density, HR-10A (two) | ||
Flow rate setting signal | 0 to 5 V DC (input impedance: approx. 1 MΩ), or 4 to 20 mA (input impedance: approx. 250 Ω) | ||
Flow rate output signal | 0 to 5 V DC (load resistance 10 kΩ), or 4 to 20 mA (load resistance ≤ 500 Ω) | ||
Digital communication | Address setting with RS485 rotary switch or indicator: up to 99 devices (9600 bps) | ||
Event input | Three contact inputs (non-insulated) | ||
Event output | Three NPN open collectors (non-insulated, max. rating 35 V, 50 mA) | ||
Required power supply (DC) | +24 V DC (±10%), 300 mA max. (DC jack, D-sub) | ||
Joint*6 | 1/4 F900 (standard), 1/4 UJR, Rc 1/4 | ||
Mounting posture | Horizontal installation recommended. | ||
Weight*7 | Approx. 950 g | Approx. 1100 g |
Other Articles:
- Kofloc Mass Flow Controller D8500 Series
- Kofloc RK1450 High Precision Flow Meter for Sensitive Measurement
- Kofloc RK120X Rotameter
- Kofloc RK120XM Series Flow Meter for Gas Mixing
- Bamo Needle Valve A 32
- Flow Control Valve Kofloc
- Kofloc Model 3760 Series
- Kofloc Back Pressure Valve Model 6801 Series
- Differential Pressure Flow Meter
- Kofloc Mass Flow Meter and Controllers
- Rotameter Kofloc RK1930/RK1935
- Kofloc CK Series Flow Setting Device Model