Pelton Wheel Flowmeters

Pelton Wheel Flowmeters

Pelton Wheel Flowmeters has its flow rate range controlled by the connection and orifice size. For example, the MM20 has 3/4″ connections and a flow range of 2 to 130 litres per minute. The ring assembly with rotor is the same size irrespective of flow rate and connection size.

  Another Article:

 

 

Pelton Wheel Flowmeters Application

Pelton Wheel Flowmeters Key Features

  • Compact wafer designs
  • Very Low Flow Measurement
  • Proven since 1975
  • Tolerant of particulate up to 100+ microns
  • Low pressure drop (<0.5 bar typical)
  • Single Moving Part
  • Wide Flow Range, up to 65:1
  • Low Maintenance
  • 35,000 installed
  • Highly Durable
  • Preserves Molecular Integrity of fluid

Technical Specifications MM range

Flow rates

MM12.5 65 l/min
MM20 130 l/min
MM25 160 l/min
MM30 220 l/min
MM37 350 l/min
MM50 500 l/min
MM62 800 l/min
MM75 1300 l/min
MM100 2200 l/min
MM150 5000 l/min
Accuracy ±2% of reading over top 90% of range
Repeatability ±0.2% reading over top 90% of range
Pressure Ratings 5 to 230 bar depending on material
Temperature rating -40°C – +100°C & 135°C dependent on material and pressure
Viscosity Range 0.5 to 10cP
Recommended Filtration A 100 micron filter is advisable for 100% long life serviceability.
Dimensions Refer to drawings

The ring assembly with rotor is the same size irrespective of flow rate and jet size.

Reference: litremeter.com
  • Canning
  • Agricultural
  • Fuel
  • Chemicals
  • Batch Control
  • Mixing
  • Aerospace
  • Military
  • Low viscosity
  • Film Processing
  • Glass
  • Textile
  • Low Flow
  • Spraying
  • Automotive
  • Rubber & Plastic

Pelton Wheel Flowmeters Key Features

  • Compact wafer designs
  • Very Low Flow Measurement
  • Proven since 1975
  • Tolerant of particulate up to 100+ microns
  • Low pressure drop (<0.5 bar typical)
  • Single Moving Part
  • Wide Flow Range, up to 65:1
  • Low Maintenance
  • 35,000 installed
  • Highly Durable
  • Preserves Molecular Integrity of fluid

Technical Specifications MM range

Flow rates

MM12.5 65 l/min
MM20 130 l/min
MM25 160 l/min
MM30 220 l/min
MM37 350 l/min
MM50 500 l/min
MM62 800 l/min
MM75 1300 l/min
MM100 2200 l/min
MM150 5000 l/min
Accuracy ±2% of reading over top 90% of range
Repeatability ±0.2% reading over top 90% of range
Pressure Ratings 5 to 230 bar depending on material
Temperature rating -40°C – +100°C & 135°C dependent on material and pressure
Viscosity Range 0.5 to 10cP
Recommended Filtration A 100 micron filter is advisable for 100% long life serviceability.
Dimensions Refer to drawings

The ring assembly with rotor is the same size irrespective of flow rate and jet size.

Reference: litremeter.com
Share

Mass Flow Instrument

%d bloggers like this: