Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.
Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.
Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.
Plastic Flow Indicator IDP
IDP or PDP indicators use the principle of variable area flow-meter: the fluid flow raises a diver in a conical tube, expanding the cross section of the passage of fluid. The diver moves up proportionally to the flow-rate. Standard equipment includes a graduated scale in l/h of water at 20 °C. In options there are specific scales; Air in Nm3/h (1 to 9 bar ABS); HCl at 30 / 33 %; NaOH at 30 % and at 50 %. See the data sheet 730-06 With magnetic diver versions, the Z60 transmission ruler converts the diver position into a 4-20 mA signal. See the data-sheet 730-07
Flow indicators must be installed vertically with rising fluid. It is recommended to have a length upstream of 10 x ND and a length downstream of 5 x DN.
- Direct reading
- All wet parts in plastics
- Measuring tubes: PVC or Polysulfone
- Ranges: Up to 60 m³/h
- Specific scales for Air, HCl, NaOH, etc.
- Adjustable contacts
- 4-20 mA transmitter
|Pressure||Max. 10 bar at 20 °C|
|Temperature limits at 1 bar||PVC: 0 … +50 °C|
|PSU: 0 … +90 °C (or 60 °C with standard PVC|
|Graduated scale||l/h of water at 20 °C (standard)|
|Materials||PVC or Polysulfon|
|Diver and stoppers||PVDF|
|Diver guide rod||PVDF-coated stainless steel (ND 50 and 65)|
|Seals||Standard: EPDM; FPM in option|
|Fittings:||Standard: PVC Unions for solvent welding|
|Options: See the table “Fittings”|
|Contacts Z42 and Z40|
|The flow indicator must have a diver with a built-in magnet (PVDF-A)|
|Switching power||Max. 10 W / 12 VA; 230 V AC; 0.5 A|
|Operating||Z42: N.O. without flow|
|Z40: N.C. without flow|
|Protection||IP 65 – Pluggable terminal block|
|Ambient temperature||0… +55 °C|
Download Data Sheet: Plastic Flow Indicator IDP