Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.
Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.
Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.
Turbine Flow Meter BAMOTUR
A flow meter BAMOTUR consists of a turbine mounted on a shaft of sapphire or of stainless steel. The turbine is rotated by the dynamic pressure of the liquid in movement. Magnets are encapsulated in the turbine and activate an electronic Hall effect sensor inserted in the upper part of the flow meter. The electronic part generates pulses, in relation to the speed of rotation.
Vertical mounting, flow in the direction of the arrow. It is recommended to install a filter upstream, to avoid blocking the turbine (especially for low flow rates).
- Range from1.5 up to 1000 l/h
- Output signal: Pulse or 4-20 mA
- For aggressive or high grade liquids
- Small dimensions
- Materials: E-CTFE, PVDF or POM
The BAMOTUR series is suitable to measure low flow-rates and for totalization, of neutral or aggressive liquids, in all industries. The liquid may not contain particles and may not crystallize.
|Sensor, electronic||Hall Effect sensor, no wet parts|
|Supply power, according the model||or 4.5 … 24 V DC; Max. 11 mA at 24 V|
|or 12 … 24 V DC; Max. 11 mA at 24 V|
|or 10 … 30 V DC|
|Output signal||Or square pulses, or 4-20 mA|
|Cable||3 x 0.14 mm² – length 1 metre|
|Accuracy||±2 % full scale (F.S.)|
|Repeatability||< 0.8 % F.S.|
|Viscosity range||1 … 10 cSt|
|(Over 10 cSt: Calibration is necessary)|
|Operating pressure||According to the model|
|Operating temperature||-10 … +55 °C|
|Body||Or E-CTFE, or PVDF, or POM|
|Axis||Or sapphire, or stainless steel|
|Seals*||FPM in standard; EPDM as an option|
|Mass||50 g up to 350 g (according the model)|
Download Data Sheet: Turbine Flow Meter BAMOTUR