Description
Bmeters MB-PULSE 4 Pulse module allows to convert the classic impulse signal (REED or OC) to the Wired M-BUS standard (EN13757-3). It is possible to connect up to four pulse meters (water, gas, electricity, heat etc), any caliber, any manufacturer and any version.
Each record is distinguished by four separate addresses, allowing easy reading of the consumptions. Easy installation and configuration. It is possible to configure the primary addresses by using the B METERS software BMBUS and master mod.MB-MASTER.
Bmeters MB-PULSE Technical Features
| DIMENSIONS | 89 x 74 x 40 mm |
| WEIGHT | 122 g |
| TEMPERATURE RANGE | +1° / +55°C |
| POWER SUPPLY | From BUS Network, 3 V Lithium Battery (backup) |
| BATTERY LIFE | 1 year (if disconnected from BUS network) |
| PROTECTION CLASS | IP65 |
| TRANSMISSION PROTOCOL | MBUS Standard EN 13757-3 |
| MEASUREMENT SENSIBILITY | 1 – 10 – 100 – 1000 |
| MEASUREMENT UNITS AVAILABLE | L – Wh – KJ |
| TRANSMITTED DATA | Consumption Device Status |
| INPUTS | N°4 pulse inputs. Connectable to pulse emitters (REED and Open Collector) |
| MAXIMUM INPUT FREQUENCY | 20 Hz |
| OUTPUT | N°1 Wired MBUS output |
Download Datasheet: Bmeters MB-PULSE 4 Pulse to Wired M-Bus signal converting module
Reference: bmeters.com
Another Article:
- Flow Meter Ultrasonic Jenis Clamp On Untuk Pipa PVC
- ONICON F-3200 Series Inline Electromagnetic Flow Meter
- Flowmasonic WUF100 IC Ultrasonic Compact Water Flow meter
- Signet 515 Rotor-X Paddlewheel Flow Sensor
- Seametrics Single Jet Low Flow Meter SPT & SPX Series