Flux Centrifugal Immersion Pumps Type F 620

Centrifugal Immersion Pumps Type F 620
Centrifugal Immersion Pumps Type F 620

FLUX centrifugal immersion pumps are used when larger flow rates, continuous running or special immersion lengths are required. They are especially suitable for pumping and circulating aggressive and abrasive media. There is a choice of different materials available depending on the chemical and thermal requirements. In addition sealless and horizontal versions are available. FLUX centrifugal immersion pumps are individually configured and manufactured according to the technical requirements in each case.

The centrifugal immersion pumps for mobile and stationary use type 600 are especially suitable for filling and transferring bigger quantities of containers, tanks, open basins etc. They impress with highest performance and reliability when pumping and circulating aggressive and abrasive fluids. With immersion lengths up to 4100 mm almost all applications can be covered. The type 600 is available in horizontal and vertical version.

Centrifugal Immersion Pumps Type F 620 is to pump heavy flammable liquids from containers, tanks and open containers. The pump is available in two versions with open conical impeller or a closed centrifugal impeller in different sizes.

Features:

  • Available with open conical rotor or closed impeller
  • Two sizes available:
    • Conical rotor 15 and 30
    • Impeller 157/3 and 157/5
  • Mounting flange with outer  Ø 265 mm
  • Consisting of an inner and outer tube as well as the drive shaft that is mounted in the inner tube
  • Installation in pressurized tank or gas scrubber possible

Advantages:

  • Suitable for tanks heights up to 4.1 m without bottom opening
  • Pumps also fluids containing solids
  • For mobile and stationary use
  • Motor replaceable
  • Pump is hermetically tight

Application:

  • Anodizing solution
  • Vegetable fibre suspension
  • Water-based lacquers
  • Alkaline pickling vats
  • Industrial effluent

Another Article:

Specification:

  • Flow rate: max. 383 l/min1
  • Delivery head: max. 12 mwc1
  • Viscosity: min. 1 mPas – max. 2500 mPas1
  • Diameter pump housing: max. 140 mm2
  • Diameter mounting flanges: max. 265 mm2
  • Materials outer tube: Stainless steel
  • Media / Fluids: Acids, Alkalis, AdBlue®, Fuels
  • Seal: mechanical seal
  • Container: 1000 l IBC, Tanks > 1000 liters

Download Data Sheet: Centrifugal Immersion Pumps Type F 620

Ref: flux-pumps.com