Description
Dinel CNP–18 Conductive Probes are designed for direct detection of conductive liquids level (water, water solutions). The process connection is M18x1.5 threaded connection, and electrical by fixed cable or screw connector. The probes are connected to Dinel evaluation unit, type CDSU–522 (CDSU–522–W), or other types of evaluation units suitable for connection of the conductive sensors
For direct level detection of liquids
- Media temperature up to 130 °C
- Simple mounting, connection by cable or contact screw
- Material of housing and electrode from stainless steel
- Functionality of the probes are provided by Evaluation & switching unit CDSU-522
Dinel CNP–18 Conductive Probes Features
- For limit level detection of liquids
- Media temperature up to +130°C
- Simple assembly, long service life
- Housing and electrode is from stainless steel
- Designed with a short bar electrode or dismountable rod electrode
Features of Variants
- CNP– 18N – 10 Short bar electrode for horizontal mounting, fixed cable
- CNP– 18F – 10 Short bar electrode for horizontal mounting, screw connector
- CNP– 18N – 30 Dismountable rod electrode (from 50 up to 3000 mm) for vertical mounting, fixed cable
- CNP– 18F – 30 Dismountable rod electrode (from 50 up to 3000 mm) for vertical mounting, screw connector
Dinel CNP–18 Conductive Probes Specification
| Ambient temperature | Max. 95°C |
| Maximum pressure For | |
| 25°C | 4 MPa |
| For 95°C | 1.5 MPa |
| Cable | |
| CNP–18N | PVC 2x 0.75 mm2 |
| CNP–18F | (Screw connector) |
| Insulation bushing | PTFE (Polytetrafluorethylene) |
| Protection class (CNP–18N) | IP67 |
| Housing material | St. steel W.Nr. 1.4305 (AISI 303) |
| Weight | Approx. 100 g |
The firm Dinel, s.r.o. was founded in 1995, after transformation from the small private firm, which produced capacitive sensors since 1991. Nowadays Dinel, s.r.o. is one of the most influential producers of level measurement systems in the Czech Republic with big annual increases in sales and strong innovative potential.
Our level meters and limit sensors fulfill various requirements in a wide range of industrial branches, e.g. agricultural technology and food industry, plastic materials technology, chemical industry, petroleum and gas filling stations, in heating and water processing technology, building materials processing technology, packaging technology, in transport vehicles, etc. Besides, our power supplies, control units, and controllers are very frequently used in various control and measuring systems.
Download Catalog: CONDUCTIVE PROBES CNP-18 Dinel
Ref: Dinel.cz
Another Article:
- Electrode Level Sensor
- Bamo BS – BC Conductivity and Resistivity Probes
- Bamo Cable Suspended Resistive Level Probes
- DLS–27, Dinel Capacitive-level sensors
- Hydrostatics Level Probes DSGE-25/16 Delta Mobrey