level sensorIndonesia Industrial Parts, Equipment, Mechanical, Measurement, Electric and Control

Articles

TE Water-Level Sensors

TE Connectivity (TE) is a leader in monitoring water usage and water quality. From analog to digital, standard to custom design, our water level sensors easily adapt to any data system.

Bamo Magnetic Level Controllers in Stainless Steel MNR 7 – I

Contacts are changeover&bistable: status reverses only when the float passes again in front of. Terminals are in aluminum housing, IP 65; Wiring diagram is shown on the board inside.

Bamo Level Leak Localizer and Detector BAMOLEAK

The Level leak localizer and detector BAMOLEAK allows to secure work areas where leaks are prejudicial for equipment, by detecting and precisely locating leaks of conductive liquids.

Bamo Level Floor Leak Detector WM25

Level floor leak detectors WM25 are used for monitoring water leaks in rooms and retention basins. The sensor detects non-aggressive and electrically conductive liquids such as water.

Bamo Level Detection for Grease-Water Separators GAD 531

GAD 531 and probe GP/10 are designed for monitoring grease-water separators. The probe GP/10 detects when the thickness of floating greases over water, is greater than the permitted max. thickness.

Bamo Level Detection for Oil-Water Separators RAC 531

Level Detection for Oil-Water Separators RAC 531 is designed for the monitoring of hydrocarbon fluids separators. With sensor, the alarm device detects when the maximum thickness is reached.

Alarm System for Oil-Water Separators NivOil® / 230 V AC

Bamo Alarm System for Oil-Water Separators NivOil® / 12 V DC

Designed for the monitoring of hydrocarbon fluids separators, the alarm device NIVOIL may be connected to 1, 2 or 3 sensors. The 3 sensors may be connected to any input of the alarm device NIVOIL.

Bamo Alarm System for Oil-Water Separators NivOil® / 230 V AC

Designed for the monitoring of hydrocarbon fluids separators, the alarm device NIVOIL may be connected to 1, 2 or 3 sensors. The 3 sensors may be connected to any input of the alarm device NIVOIL.

Capacitive level sensors DLS–35, Dinel-Level and Flow Measurement

It is designed for limit sensing of the level of liquid and bulk solids in tanks, sumps, silos, etc. It manufactured in several modifications of sensing electrodes (rod and rope).

Capacitive Level Sensors CLS-23, Dinel-Level and Flow Measurement

It is designed for limit level detection of electrically conductive and non-conductive liquids in vessels, reservoirs, tanks, etc. The sensor can be easily set by placing a magnetic pen.

Articles

Submersible level sensor CLS–23S, Dinel-Level and Flow Measurement

It is developed as a reliable and low-cost solution for limit level sensing of water with miniature outer dimensions without the needs of any adjustment. It replaces the old type CLS–18S.

Articles

High-frequency limit level sensor RFLS–35, Dinel-Level and Flow Measurement

It is designed for industrial use for limit sensing of the level of liquid and paste-like media, It is a direct replacement of a capacity level sensor in case of more demanding applications.

Articles

Capacitive level sensors DLS – 27, Dinel-Level and Flow Measurement

It designed for limit sensing of the level of liquid and bulk solids in tanks, sumps, tubes, silos, etc. The sensors are manufactured in several modifications of sensing electrodes (rod and rope).

High Frequency Level Sensors RFLS-28, Dinel-Level and Flow Measurement

It is intended for industrial use for limit level sensing of liquid and pastes media. It is designed for vertical mounting in the tank or using a tubular extender.
accessories) or a bracket

Capacitive proximity switch CPS–24, Dinel-Level and Flow Measurement

It is intended for the detection of proximity or motion of solid objects. It is suitable for an indication of the liquid level through non-conductive walls of vessels or on non-conductive gauge-pipes.

Conductive probes CNP–18, Dinel-Level and Flow Measurement

Conductive probes CNP–18 are designed for direct detection of conductive liquids level (water, water solutions). The process
the connection is a threaded connection, and electrical by fixed cable.

FS-4 Petroleum leakage float system, Dinel-Flow Meter

It is intended for the detection of leakage of petroleum and petroleum products in trap or protection reservoirs. It consists of two guiding rods and afloat which resistant assessment unit installed.

Signet 2250 Hydrostatic Level Sensor

The Signet 2250 Hydrostatic Level Sensor for level and depth control has a one-piece injection molded PVDF body and ceramic diaphragm for superior compatibility in corrosive liquids.

High-frequency limit level sensor RFLS–35 Dinel

this device designed for industrial use for limit sensing of the level of liquid and paste-like media. The high-frequency level sensor may be a direct replacement of a vibrating level sensor.

DLS–35, Dinel-Capacitive level sensors

This device designed for limit sensing of the level of liquid and bulk solids in tanks, sumps, tubes, silos, etc. The sensors are manufactured in several modifications of sensing electrodes.

DLS–27, Dinel Capacitive-level sensors

This device designed for limit sensing of the level of liquid and bulk solids in tanks, sumps, tubes, silos, etc. The sensors are manufactured in several modifications of sensing electrodes.

CLS–23 Dinel-Capacitive level sensors

it designed for limit level detection of electrically conductive and non-conductive liquids in vessels, reservoirs, sumps, tanks, etc. It also easily set by placing a magnetic pen on a sensitive spot.

DTA 9468 Digital Tank Level Display Hengesbach

The DTA 9648 tank content display was designed for all applications in the tank content measurement area and is in
particular, used for volume measurements with liquid media in tanks of various shapes

Hengesbach Level Module NC1 Series

The NC1 is used for product and foam detection. A low- and high-resistance switch output enables “full” and “empty” messages to be sent for liquids with a high or low conductivity.

Conductive Level Sensor Type NKS 13 Hengesbach

Conductive level sensors are mainly used to detect conductive threshold levels in liquids such as fruit juices, beer,
milk with minimum conductivity. The design ensure that sensor is easy to clean

Conductive Level Sensor Type NKS 11 Hengesbach

The conductive level sensors are mainly used to detect conductive threshold levels in liquids such as fruit juices, beer, milk, etc. with a minimum conductivity of 5 µS. The favor able design

Hengesbach Depth-Measuring Sensor Type TPS-T

Typical applications of the depth-measuring sensor of the type TPS-T are the continuous measuring of filling levels in wells, drill-holes, waste-water systems, standing water bodies and containers

Pulsarpoint 300 Pulsar Rotating Paddle Switch

Pulsarpoint 300 is a rotating paddle level switch for level measurement and switching on bulk solids.

TE KPSI 710 Hydrostatic Level Transducer

The KPSI 710 is a submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control.

TE KPSI 745 Hydrostatic Level Transducer

The KPSI 745 Submersible Hydrostatic Level Transducer is specifically designed to meet the rigorous environments encountered in a slurry or highly viscous application & can be installed in a 4” pipe.

TE KPSI 720 Hydrostatic Level Transducer

The KPSI 720 is a submersible hydrostatic level transducer specifically designed to meet the rigorous environments encountered in liquid level measurement and control.

TE KPSI 705 Submersible Hydrostatic Level Transducer

TE KPSI 705 is a submersible hydrostatic level transducer specifically designed to meet the adverse environments encountered in wastewater applications.

TE KPSI 750 Submersible Hydrostatic Level Transducer

TE KPSI 750 submersible hydrostatic level transducer is specifically designed to meet the rigorous environments encountered in a slurry or highly viscous application.

TE KPSI 351 Submersible Hydrostatic Level Transducer

TE KPSI 351 submersible hydrostatic level transducer is specifically designed for small bore applications and to meet the rigorous environments encountered in groundwater level measurements.

TE Submersible Level Transducer KPSI 320

TE Submersible Level Transducer KPSI 320 is designed for small bore applications and to meet the rigorous environments encountered in groundwater level measurements.

Seametrics LevelSCOUT Submersible Level/Temperature Smart Sensor

The Seametrics LevelSCOUT Smart Sensor is an integrated datalogger and level/temperature sensor and is ideal for site assessments, tidal studies, environmental monitoring.

Seametrics Smart Sensors

Seametrics scot Pressure & Level Sensor pressure sensor, level sensor, level meter, level transmitter, pressure transmiter

Jenis level meter, cara kerja level sensor dan Level Switch

Level meter alat ukur ketinggian yang terdiri dari level sensor dan level transmitter. Jenis level sensor adalah ultrasonic sensor, level switch, radar sensor, float level sensor, rotary paddle level

Vegapuls 61 Radar Level sensor untuk Level Meter Tanki

The VEGAPULS 61 Level meter adalah level sensor radar untuk mengukur level cairan secara continue dan solusi ekonomis melalui pemasangan yang sederhana & serbaguna.

Radar Level Sensor

Continuous Radar level sensor provides non-contact continuous level measurement of difficult liquids and solids that cannot be measured with ultrasonic sensor