Apollo Valves AE Series Actuator & Controls

Ruggedly Built and Designed For Easy Installation

Apollo Valves AE Series Actuator & Controls deliver the most standard features and performance in their class. Now CSA listed all sizes as standard.

Apollo Valves AE Series Features :

Five Output Torques, One Housing

  • 200, 400, 600, 800 and 1,000 inch-pounds
  • Long service life
  • Anodized die cast aluminum housing
  • Fiberglass reinforced nylon cover resists corrosion
  • Nitrile gasket and seals cover all penetration points in housing and cover
  • Precision cut and heat treated alloy spur gears
  • Permanently lubricated enclosed gear train
  • NEMA 4, 4X

Apollo Valves AE Series Easy to Use

  • Two separate 1/2” NPT conduit entrances for easier wiring and signal separation
  • 12-position pre-wired terminal strip includes standard connections for remote open/closed position indicators; lots of room for wiring options
  • Unrestricted mounting orientation
  • Built-in thermal overload protection in all AC motor actuators
  • Limit switches have an 11 amp rating at 115 VAC
  • High visibility valve position indicator standard on all models

Another Article:

Many Standard Features

  • Stainless steel push-and-turn manual override shaft, position indicator shaft and female output
  • ISO 5211 F07 drive output reduces inventory of mounting kits
  • 115 AC & 220 AC models feature a 25% duty cycle below 100˚F (24AC — 20% duty cycle below 100˚F)
  • 12 and 24 DC — all DC voltage models provide 100% duty cycle for 1 hour after which DC motor is reduced to 80% duty cycle.
  • Reversible rotation

Broad Temperature Range

  • Operates from -40˚F (when equipped with 15 watt heater and thermostat) to 150˚F

Available Options

  • Actuators can be ordered with one, two or three additional limit switches
  • For low temperatures: actuators can be equipped with a thermostatically controlled heater element
  • Motor brake is necessary when mounting actuator to a butterfly valve

4-20MA Positioner Features (P – OPTION)

Advanced Protection Features

  • Stall Detection – Motor will not burn out from stalling
  • Fault Signal – Fault LED on DHC-100 front panel
  • Duty Cycle Protection – Allows actuators rated for 25% duty, or more, to be safely modulated. Activates prior to tripping of thermal overload protector, which prevents long shut down periods due to tripping thermal overload protector; allows the actuator to continue to move to set-point at a 25% duty cycle speed.

Performance Features

  • High Resolution (± 0.1°) 450 points of resolution on a 1/4 turn valve
  • Dynamic Braking – Stops motor before changing actuator direction. Stops motor before mechanical brake engages, which reduces break wear Adaptive Control – Designed to maintain high resolution and accuracy by continuously monitoring and compensating for actuator backlash, motor coast, and load changes to eliminate positioner deadband

4-20MA Position Transmitter Features (T – Option)

  • High Resolution Feedback Transmitter – Provides voltage or mA output that can be set for any range (0 to 10 VDC in 0.0016 V steps or 0 to 20 mA in 0.0031 mA steps)
  • Auto/Manual Station (Local Control Unit – LCU)
  • Polarity Detection

Download Data Sheet : Apollo Valves AE Series Actuator & Controls

Ref : www.apollovalves.com

Contact us : sales@wmablog.com or visit to our E-Commerce

Share
%d bloggers like this: