Dwyer TFP-LP Series Liquid Turbine Flow Meter

Description

Dwyer TFP-LP Series Liquid Turbine Flow Meter are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. Couple this unit with a Series TM2 Flow Totalizer for a remote flow monitoring display. A power adapter or mating cable assembly is required for operation.

Turbine sensors with electrical transmission output for remote indication of liquid flow rate. Dwyer turbine flow transmitters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. A power adapter or mating cable assembly is required for operation.

Dwyer TFP-LP Series Features

These meters utilize a turbine wheel and electro-optical detection
convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging
Flow Totalizer for a remote flow monitoring display

Specification

Service	Clean liquids compatible with wetted materials.
Wetted Materials	PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.
Accuracy	±1% of full scale.
Linearity	±1% of full scale.
Repeatability	±0.2% of full scale.
Temperature Limits	41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of full scale per °C.
Pressure Limits	100 psig (6.8 bar).
Process Connection	Compression fitting
Power Requirements	11.5 to 15 VDC.
Power Consumption	35 mA @ 12 VDC.
Output Signal	0 to 5 VDC: Minimum 2.5 k? load; Pulse: 7.5 VDC peak buffered square wave.
Electrical Connections	Four-pin power and signal connector. A power adapter or mating cable required for operation.
Enclosure Rating	IP10 (NEMA 1).
Weight	0.19 lb (85 g).
Agency Approvals	CE.