FLocorp MagFlo™ MMFM Magnetic Flow Meter is ideal for most liquid process applications such as pulp and paper, agricultural, chemical, water, wastewater, oil and gas, and OEM applications. The units are offered in a wide variety of sizes and flow ranges. The MAGFLO™ is available in flanged and wafer style. Line sizes available range from 1/2 inch to 24 inches.
FLocorp MagFlo™ MMFM Features and Benefits
- No moving parts
- Virtually no pressure drop
- Minimal maintenance
- Wide range of flow rate and connection sizes
- A broad selection of lining and electrode materials
- Economically priced
- HART or Modbus Communications
- Auto-Diagnostics with Alarms
Specifications
Power Supply | • 110 – 240 VAC, 45~65 Hz (Single Phase AC) |
• 18 – 36 VDC | |
• Battery | |
Power Consumption | Approx. 10W max. with sensors connected |
Accuracy | ± 0.5% accuracy of rate from .98 to 40 ft/s |
± 1.0% accuracy of rate from .32 to .98 ft/s | |
Repeatability | 0.2% |
Minimum Fluid Conductivity | 5.0 micromhos/0.39” |
Flow Direction | Unidirectional or bidirectional, 2 separate |
totalizers (programmable) | |
Analog Outputs | 4-20mA, 750ohms max load |
Output Frequency | Scaled pulse output, (open collector) max 5Khz |
Noise Damping | Programmable via HART or Push Buttons |
Pulse Width | Programmable up to 500 ms via HART or |
Push Buttons | |
Zero-point Stability | Automatic correction or programmable |
Ambient Temperature | Hard Rubber Liner: -20 to 140ºF (-20 to 60ºC) PTFE Liner: -20 to 248º (-20 to 120ºC) |
Electrode Materials | Standard: SS316L |
Optional: Titanium; Hastelloy Alloy C; Tantalum | |
Liner Material | PTFE, Hard Rubber, Other Liner Material Upon Request |
Fluid Temperature | PTFE: 248º F standard (customized 356ºF) Rubber: 140ºF |
Pressure Limits | Standard: 165 PSIG |
Optional: 580 PSIG | |
Coil Power | Pulsed DC |
Pipe Spool Material | SS316 Flow Tube beneath liner |
Meter Housing Material | Carbon Steel – Standard (ISO 7005-1) |
Polyurthane Coated | |
Optional Stainless Steel Grounding Rings | |
Process Connections | Standard: ANSI 150 lbs RF Type |
Other sizes and pressure ratings on request | |
Grounding Rings or Electrode | Standard: SS316L |
Optional: Titanium; Hastelloy Alloy C; Tantalum |
Download Datasheet: MagFlo™, Flocorp MMFM Magnetic Flow Meter
Ref: Flo-corp.com
Other Article:
You must be logged in to post a comment.