Cylinder unit | cylinder hydraulic | cylinder pneumatic
Hydraulic cylinders dengan style tie rod menggunakan high strength threaded steel rods untuk menahan kedua ujung end caps ke cylinder barrel. Produk ini dapat anyak ditemukan di pabrik industri terapan. Bore cylinders berukuran kecil, biasanya memiliki 4 tie rod, sedangkan bore cylinders berukuran besar dapat memiliki sebanyak 16 sampai 20 tie rod untuk menjaga end caps yang dalam kondisi dibawah tenaga besar yang dihasilkan.
Tie rod style cylinders dapat di dibongkar secara keseluruhan ketika perawatan atau perbaikan, namun mereka tidak selalu dapat disesuaikan. National Fluid Power Association (NFPA) telah menetapkan standar dimensi dari hydraulic tie rod cylinders. Ini membuat silinder dari berbagai macam produsen dapat ditukar-tukar pada mounting yang sama.
Specification
| Bore (mm) | 32 • 40 • 50 • 63 • 80 • 100 | |
| Fluid | Air | |
| Operating pressure | 0.5~9.9 kgf/cm² | |
| Temperature | -20~+80°C | |
| Piston speed | Max. 1m/s | |
| Stroke (mm) | (1) S 500 : +2.0~0(2) 501 S 1250 : +3.2~0 | |
| Cushion length (mm) | Ø32, Ø40, Ø50, Ø63 | 22 |
| Ø80, Ø100 | 25 | |
Theoretical Force
Bore (mm) | Rod (mm) | Action | Pressed Area (cm²) | Operating pressure (kgf/cm²) | |||||
3 | 4 | 5 | 6 | 7 | 8 | ||||
32 | 12 | push | 8.04 | 24 | 32 | 40 | 48 | 56 | 64 |
pull | 6.91 | 21 | 27 | 34 | 41 | 48 | 55 | ||
40 | 16 | push | 12.56 | 38 | 50 | 63 | 75 | 88 | 100 |
pull | 10.56 | 32 | 42 | 53 | 63 | 74 | 84 | ||
50 | 20 | push | 19.63 | 59 | 79 | 98 | 118 | 137 | 157 |
pull | 16.49 | 49 | 66 | 82 | 99 | 115 | 132 | ||
63 | 20 | push | 31.16 | 93 | 125 | 156 | 187 | 218 | 249 |
pull | 28.02 | 84 | 112 | 140 | 168 | 196 | 224 | ||
80 | 25 | push | 50.24 | 151 | 201 | 251 | 301 | 352 | 402 |
pull | 45.34 | 136 | 181 | 227 | 272 | 317 | 363 | ||
100 | 25 | push | 78.5 | 236 | 314 | 393 | 471 | 550 | 628 |
pull | 73.6 | 221 | 294 | 368 | 442 | 515 | 589 | ||
Mounting type | Drawing | |
SD | Standard | |
FA (MF1) | Head rectangular flange | |
FB (MF2) | Cap rectangular flange | |
LB (MS1) | End angle flange | |
LA | Floor | |
CA | One ears elevis | |
CB | Two ears elevis | |
CC | Short elevis | |
TC (MT4) | Intermediate trunnion | |
Structure and Parts List
| Item | Part name | Qty. |
| 1 | Rod cover | 1 |
| 2 | Head cover | 1 |
| 3 | Alumunium tube | 1 |
| 4 | Piston | 1 |
| 5 | Piston rod | 1 |
| 6 | Pisto rud nut | 1 |
| 7 | Tie rod | 4 |
| 8 | Rod cover tie rod nut | 4 |
| 9 | Head cover tie rod nut | 4 |
| 10 | cushion screw | 2 |
| 11 | Powder brozen bushing | 1 |
| 12 | Piston rod seal | 1 |
| 13 | Cushion seal | 2 |
| 14 | Piston wearing | 1 |
| 15 | Induction magnet | 1 |
| 16 | Piston seal | 1 |
| 17 | Cover O-ring | 2 |
| 18 | Cushion screw O-ring | 2 |
Seal Specifications
Bore Name | Rod seal | Piston packing | Cushion packing | Cushion O-ring | Cover O-ring | Piston wearing |
Qty. | 1 | 1 | 2 | 2 | 2 | 1 |
32 | PDU12 | APA32 | (PEI160) | SM5 | SM30 | WRP32 |
40 | PDU16 | APA40 | DR20 | SM5 | SM40 | WRP40 |
50 | PDU20 | APA50 | CTU28 | SM6 | SM50 | WRP50 |
63 | PDU20 | APA63 | CTU28 | SM6 | SM63 | WRP63 |
80 | PDU25 | APA80 | CTU35 | SM8 | SM80 | WRP80 |
100 | PDU25 | APA100 | CTU35 | SM8 | SM100 | WRP100 |
Read More Article:
- Heat Nipper Merry Hand Tools
- Nile Air Cutter
- Nippers Hand Cutting Tool Merry
- Air Cutter CP Series
- Square Air Cutter
