KN-PLUS Oil skimmer & Coolant Purifying

KN-PLUS Oil skimmer and Coolant Purifying Machine remove tramp oils / Depending on the type of processing fluid, the lubricating oil and grease used on the machine will be emulsified by the metal cutting fluid or floated on the surface of the working fluid in a “slick” manner. In either case, oil slick or foreign oil can cause the failure of the working fluid.

The “cutting fluid oil-water purification cycle machine” developed by King Nice Technology can effectively separate the skid oil on the surface of the water tank, filter impurities, and emulsified substances, and reduce the bad odor generated by the fusion of the cutting fluid. It can also reduce the oil stain caused by oil mist and liquid splash, which is attached to the machine and work, avoid the stimulation and allergies caused by the skin contact of the staff, and improve the processing precision and save the tool wear.

Applicable to all types of machine cutting fluids and scrape the oil slick oil-water separation, to increase the life of cutting water.

  • Water and Coolant Saving.
  • Use Value reduce the CNC machine failure rate, processing non-performing rate.
  • Maintain the tank liquid capacity, reduce the temperature rise.
  • Reduce the cost of CNC mechanical downtime and personnel operations.
Easy Recovered King Nice Oil Skimmer
Easy Recovered King Nice Oil Skimmer


  • Reduce labor costs and cleaning time for cutting fluids. Save processing costs for waste oil recovery.
  • Reduce oil mist and liquid fly rafts causing grease on machinery and workpieces. Free from skin irritation and allergies.
  • Stop theproduction of anaerobic bacteria and reduce the frequency of changing the cutting fluid.
  • Reduce workpiece corrosion, rust, improve machining accuracy and extend tool life.
  • Filter impurities such as suspended solids to prevent backlash form affecting the surface of the motor and theworkpiece.
  • Purify cutting fluid to stabilize its quality, extend life and improve processing efficiency.
  • No need to discharge can reduce the amount of waste oil and wastewater treatment.
  • Reduce the failure rate of pipe and motor blockage.
  • It can effectively separate the slide oil, foreign matter oil, etc.on the surface of the water tank. Reduce the foul smell produced by the fusion of cutting fluid.


Machine Size 350x280x850 mm 350x280x850 mm
Weight 32 Kg 32 Kg
Capacity 35 L 35 L
Efficiency Capacity 720 – 1500 L/h 720 – 1500 L/h
Timer System Optional Yes
Air Inflate Optional Yes
Unit Waste Oil 4.5 Tank/L 4.5 Tank/L
Extra Waste Oil Optional Optional
Air Pump 1.6 Bar/min 1.6 Bar/min

Datasheet: King Nice KN-S-I-Plus coolant purifying Presentation

Other Articles :

%d bloggers like this: