Oil Skimmers Frame Mounted Oil Skimming SystemsIndonesia Industrial Parts

Floor Frame Mounted Oil Removal Systems

Pre-engineered mounting solutions for tanks, pits, sumps, guard rails, and walls. Systems include sludge pans, decanters, controllers, and more.

Oil Skimmers Frame Mounted Oil Skimming Systems — Floor Frame Mounted Oil Removal Systems

Floor Mounted Oil Removal Systems come complete with :

Oil Skimmer
30, 60, or 72-inch Frame Mount
Sludge Pan
Oil/Water Decanter
Cover for Sludge Pan and Decanter
Basic Control Panel (Skimmer Motor ON/OFF)

Available with the following options:

Hi-Flow Oil Discharge Package (for thick oil or grease)
Skimmer Heat (120V or 240V Heat Rod)
Sludge Pan Heat (120V or 240V Heat Pad)
Decanter Heat (120V or 240V Heat Rod)
Insulated Weather & Wind Jacket
Epoxy Coating (Skimmer only or entire system)
Ceramic Lined Tube Guards
Variable Frequency Drive (VFD) to control skimmer speed
Explosion Proof motor and controller
Control Panel Additions (Timer, Heat Control, Level Switches, etc.)

*Model 7V comes standard with Epoxy coating and Variable Frequency Drive.

Floor Frame Mounts were developed for the skimmer to be mounted at the edge of tanks, sumps, or pits to gravity drain collected oil into an above-ground collection tank (e.g. 55-gallon drum). Floor Frame Mounts provide an easy, economical method of mounting the skimmer, and require minimal assembly.

Guard Rail Mounted Oil Removal System

The Guard Rail Mounted Oil Removal System comes complete with:

Oil Skimmer
Guard Rail Mounting Frame
Sludge Pan
Oil/Water Decanter
Cover for Sludge Pan and Decanter
Basic Control Panel (Skimmer Motor ON/OFF)

Available with the following options:

Hi-Flow Oil Discharge Package (for thick oil or grease)
Skimmer Heat (120V or 240V Heat Rod)
Sludge Pan Heat (120V or 240V Heat Pad)
Decanter Heat (120V or 240V Heat Rod)
Epoxy Coating (Skimmer only or entire system)
Ceramic Lined Tube Guards
Variable Frequency Drive (VFD) to control skimmer speed
Explosion Proof motor and controller
Control Panel Additions (Timer, Heat Control, Level Switches, etc.)

*Model 7V comes standard with Epoxy coating and Variable Frequency Drive.

The Guard Rail Mounted Oil Removal System is ideal for efficient oil removal from ponds, sumps, or pits with existing, sturdy guard rails. Mounting directly to the existing railing positions the skimmer out, over the water, but allows it to be swung back for servicing.

The skimmed oil drips from the skimmer into a sludge pan, then into the decanter to ensure no water remains, then gravity drains into a tote, 55-gallon drum, or other containment vessel.