VE2V – INOX Bamo 2-Way Electric Stainless Steel Ball Valves controlled by an electric actuator, once closed, to isolate a part of a piping system. Open, they do not cause a pressure drop in the pipeline. Quick operation: The 90° are covered in about 10 seconds. These valves are suitable for applications with aggressive liquids, have a manual operating for emergency and a position pointer. The motor must be turned off when using the manual override.
VE2V – INOX Bamo 2-Way Electric Stainless Steel Ball Valves Features
- Stainless steel ball valves
- Fittings from ¼” up to 2”
- Electric actuator with position pointer and manual operating for emergency
|
Another Article: |
Specification
| 2-way ball valve: | |
| Body | AISI 316 |
| Seal | PTFE |
| Ball | AISI 316 |
| Ball seat | PTFE + 15% fiberglass |
| Fittings | BSPF |
| Pressure limits | 63 bar → ND 10 to ND 20 |
| 40 bar → ND 25 to ND 50 | |
| Operating temperature | -20 … +100°C ( Up to 180 °C: On request |
| Over 100 °C: On request | |
| Electric actuator: | |
| Movement | 90° |
| Emergency operating | Manual override |
| Duty rating | 30% |
| Protection | IP 65 |
| Connections | 1 cable gland ISO M20 |
| 1 connector 3 pins + ground, DIN 43650 | |
| Consumption | 15 W: ¼” to 1’’ |
| 45 W: 1 ¼” to 2’’ | |
| Multi-voltage power supplies | 100 … 240 V AC 50/60 Hz and 100 … 350 V DC |
| or 24 V AC 50/60 Hz or 24 V DC | |
| OPTIONS | Back to 0° in case of power failure (safety) |
| 4-20 mA electronic positioning system, | |
| 0-20mA or 0-10V | |
You must be logged in to post a comment.