A+ Analyzer Distribution Panel is a pre-packaged solution that makes it possible to supply up to four different analyzers with low-pressure gas samples from a single source, eliminating the need to establish multiple sample points and reducing the cost of required sampling hardware. The DaVinci Analyzer Distribution Panel consists of a single modular board with a built-in purge loop, inlet filter and gauge, integral stream isolation valves, and pressure regulators with their respective gauges.
A+ Analyzer Distribution Panel pioneered the use of membranes for removing liquids to protect analyzers in both gas and liquid streams with their Genie Membrane Separators. Additionally, the company pioneered the use of membranes on sample probes, eliminating liquids at pipeline conditions to ensure a representative sample as well as preventing liquids from contaminating the sample system.
With over 45 patents and counting, A+ continues to create new and exciting technologies that will continue to define and redefine the way fluids are sampled. The standard DaVinci Analyzer Distribution Panels supplied with one regulator and pressure gauge. Up to three additional regulators with respective gauges can be added and assembled on the board at the time of order or later in the field by the technician.
The Analytically Correct™ design of the DaVinci Analyzer Distribution Panels purge loop ensures that a representative sample is always present at the inlet of each individual sample stream. The individual sample streams are independent of one another, eliminating the chance of active streams being affected by other streams coming on or offline.
The compact modular design of the DaVinci Analyzer Distribution Panel makes it easy to install, maintain, and troubleshoot. A regulator kit is offered for easy replacement of regulators in the field. It is important to note that when sampling gases near their dew point, it may be necessary to install the DaVinci Analyzer Distribution Panel in a heated area or heated insulated enclosure. For assistance in determining heating requirements, please contact A+ Corporation or your local A+ distributor.
A+ Analyzer Distribution Panel Features
- Analytically Correct™ purge loop
- Inlet filter & gauge
- Up to four (4) pressure regulators with respective gauges
- Integral valving
- Regulator kit
- Eliminates the need to establish multiple sample points
- Reduces the cost of required sampling hardware
- The pre-packaged solution eliminates technician assembly
- Space-saving, compact modular design
- Easy to add or replace regulators in the field
For use in any process industry to supply up to four different analyzers with low-pressure gas samples from a single source
A+ Analyzer Distribution Panel Specification
|Maximum pressure rating||200 psig (13.8 barg)|
|Temperature range||-35 °F (-37 °C) to 225 °F (107°C)|
|Contact the factory regarding other temperature ratings|
|Port Sizes||1/8” female NPT inlet, bypass & outlet ports|
|1/4” female NPT gauge ports|
|Outlet pressure range||0-10 psig (0-0.7 barg), 0-25 psig (0-1.7 barg), 0-50 psig (0-3.4 barg),|
|0-100 psig (0-6.9 barg)|
|Wetted Material||Machined parts: 316 stainless steel /NACE compliant|
|All other metal parts: stainless steel / NACE compliant|
|Sealing material: Neoprene|
Download Data Sheet: DaVinci Analyzer Distribution Panel