Description
APG PT-L9/L13/L14 Pressure Transducers offer ranges from vacuum to 10,000 psi, single piece stainless steel construction, and a tamper-resistant body design. Super compact, millivolt output. These inexpensive, super compact pressure transducers have a millivolt output and fit just about anywhere. These super compact pressure transmitters produce an un-amplified mV/V output. 0-15 PSI, Absolute Pressure Reference, 1/4” NPTM, 316L SS, 5 ft. cable
There are a few different methods of mounting the sensing element to the pressure transmitter diaphragm. Each has it’s own set of pros and cons. For example, some perform better in low pressure environments, others in high pressure. We’ll use the best method according to the configuration of your sensor. Once the measurement is taken, the transmitter conditions the signal to the output you have chosen and sends it off to your control system.
Our millivolt output transducers are the economical answer for all general purpose measurements where a cost-effective, high reliability unit is required.
APG PT-L9/L13/L14 Pressure Transducers Features
- Cost effective
- Optional extended temperature compensation
- Stainless steel process fitting and sensor
Super Compact
The PT-L9/L13/L14 pressure sensors lack any electronics for programming, simply producing a millivolt output. This results in a super compact transducer that fits just about anywhere.
Very Low Cost
The simplicity of the PT-L9/L13/L14 pressure transducers means low prices for you.
Stainless Steel Construction
These sensors are built to last with your choice of 15-5 or 316L SS, for greater durability against dings and bumps, and greater chemical compatibility.
APG PT-L9/L13/L14 Pressure Transducers Specification
| Performance | |
| Pressure Range | Up to 10,000 psi |
| Accuracy | B.F.S.L. ≤ 0.25% of full scale |
| NIST up to ± 0.1% available in select ranges | |
| Temperature Compensation Range | Up to -40 to 180° F (-40 to 82° C) |
| Electrical | |
| Supply Voltage | 10 VDC |
| Connectivity | |
| Outputs | 10, 3, or 5 mV/V |
| Physical | |
| Wetted Material | 15-5 SS or 316L SS |
| Environmental | |
| Operating Temperature | -40 to 180° F (+50 to 82° C) |
Download Data Sheet: Industrial Pressure Transducers with Millivolt Output PT-L9/L13/L14
Ref: apgsensors.com
Other Article:
- Hiwin Ball Screw
- WUF100CF Flowmasonic Clamp On Water Flow Meter
- 8000 SAN Pressure Transmitter Delta Mobrey
- Hengesbach Pressure Transmitter DME 11 Series
- Pressure Transmitter 8000 Series Delta Mobrey
You must be logged in to post a comment.