Bamo TP 805 Pressure Transmitter

Bamo TP 805 Pressure Transmitter Features:

Bamo TP 805 Pressure Transmitter is factory adjusted to its measuring range and can not be modified on site. It does not require maintenance.

  • Compact and robust construction
  • Output signal: 4-20 mA; 2-wire
  • Pressure: 0 … 2.5 barg up to 25 barg
  • AISI 316 Fitting: ½” G or ¼” G
  • Ceramic diaphragm

Application:

The pressure transmitter is used for pressure measurements, continuously in real time, of gases and liquids.

Bamo TP 805 Pressure Transmitter Specification:

Pressure ranges 0… 2.5 up to 0 … 25 barg
Overload limit: 2.5 times the full scale
Accuracy ±0.5 % F.S.
Inclusive: variations on zero point, end of range, linearity, hysteresis and repeatability
Response time < 2 ms
Fluid temperature -15 … +125 °C
Ambient temperature -30 … +85 °C
Temperature incidence ±0.2%F.S./10K
Test conditions: At 25 °C
Output signal 4 … 20 mA
Power supply 7 … 33 V DC, 2-wire loop
Protected against short circuit and reverse polarity
Isolation voltage 500 V DC
Electric protection Classe III
Connections Connector DIN; EN 175301-803-A
Cable Ø 6 … 8 mm
Protection IP 65 (connector DIN mounted)
Materials:
Body and fitting AISI 316 L (1.4404)
Seal FPM
Sensor Piezo-resistive with ceramic diaphragm Al₂O₃ (96 %)
Connector Polyamide 50 % GF UL 94 V-0
Mounting:
Fitting Male threads: G ¼” or G ½”
Mounting position Vertical, connector upward (recommended)
Mass 90 g
Agreements
Electromagnetic compatibility Directive EN 61326-2-3
EMC additional Directive EN 50121-3-2
Mechanical Tests & Environmental Tests Procedures IEC 68-2-27 & IEC 68-2-29
Vibrations, mechanical tests Procedures IEC 68-2-6

Download Data Sheet: Pressure Transmitter TP 805

Ref: bamo.eu

Another Article:

Similar Posts