Pepperl+Fuchs M100/MV100-RT/35/76a/95/103 Thru-beam sensor

Pepperl+Fuchs M100_MV100-RT_35_76a_95_103 Thru-beam sensor
M100_MV100-RT_35_76a_95_103 Thru-beam sensor

The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.

     Another Article:

Features

  • Miniature design
  • Easy to use
  • Very bright, highly visible light spot
  • Full metal thread mounting
  • Highly visible LEDs for Power ON and switching state
  • Not sensitive to ambient light

Technical Data

System components
Emitter M100-RT/35/76a/95
Receiver MV100-RT/35/95/103
General specifications
Effective detection range 0 … 20 m
Threshold detection range 30 m
Light source LED
Light type modulated visible red light
Diameter of the light spot approx. 2 m at a distance of 30 m
Angle of divergence approx. 2 °
Optical face frontal
Ambient light limit EN 60947-5-2
Functional safety related parameters
MTTFd 860 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: power on
Function indicator Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Control elements sensitivity adjustment
Control elements Light-on/dark-on changeover switch
Electrical specifications
Operating voltage 10 … 30 V DC
Ripple max. 10 %
No-load supply current Emitter: ≤ 15 mA
Receiver: ≤ 8 mA
Input
Test input emitter deactivation at +UB
Output
Switching type The switching type of the sensor is adjustable. The default setting is: light on
Signal output 1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Voltage drop ≤ 1.5 V DC
Switching frequency 250 Hz
Response time 2 ms
Conformity
Product standard EN 60947-5-2
Approvals and certificates
UL approval cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -30 … 60 °C (-22 … 140 °F)
Storage temperature -40 … 70 °C (-40 … 158 °F)
Mechanical specifications
Housing width 11 mm
Housing height 31 mm
Housing depth 20 mm
Degree of protection IP67
Connection M8 x 1 connector, 4-pin
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 20 g (emitter and receiver)
Tightening torque, fastening screws 0.6 Nm

Download Datasheet: Pepperl+Fuchs M100/MV100-RT/35/76a/95/103 Thru-beam sensor

Reference: pepperl-fuchs.com