Seametrics DO2 Smart Sensor is the next generation in trouble-free oxygen sensing design. Utilizing fluorescence of a stable, immobilized ruthenium-based film matrix, the sensor provides precision optical transmission and detection to measure oxygen concentration in the fluid outside of the sensor. Equipped with integrated datalogger and Aqua4Plus software, this sensor provides convenient, high-quality data to the user.
Seametrics DO2 Features
- Measures and records dissolved oxygen and temperature internally
- Modbus® RTU (RS485)
- 260,000+ record non-volatile memory — no data loss in the event of a power failure
- Programmable warm-up time
- The sensor does not require water movement, flow, or frequent cleaning
- Does not require frequent calibration
- 1.66″ diameter—fits easily in 2-inch wells
- Measures dissolved oxygen and temperature
- Fluorescence sensor technology
- No membranes, fill solutions, replacement caps, or cartridges required
- Includes new Aqua4Plus control software for setting up flexible recording sequences, retrieving data, monitoring real-time data, and viewing collected data
Applications
- Dam discharge monitoring aquaculture
- Leachate monitoring (Landfill)
- Long-term surface water monitoring
- Monitoring remediation performance
- Municipal and industrial water treatment facilities
Specification :
| General |
| Probe Diameter |
1.66” (4.22 cm) |
| Tube Material |
Acetal & 316 stainless steel |
| or titanium |
| Probe Material |
Epoxy, polyurethane, and PVC |
| Wire Seal Material |
Fluoropolymer and PTFE |
| Submersible Cable |
Polyurethane, polyethylene, |
| or ETFE available |
| Terminating Connector |
Available |
| Communication |
RS485 Modbus® RTU |
| Direct Modbus Read Output |
32-bit IEEE floating-point |
| Internal Math |
32-bit floating-point |
| Direct Modbus |
32-bit IEEE floating-point |
| Read Output |
| Internal Math |
32-bit floating-point |
| Operating Temp. Range |
0° C to 55° C |
| Storage Temp. Range¹ |
-40° C to 80° C |
| Logging |
| Memory |
260,000+ records |
| Log Types |
Variable, user-defined, logarithmic, |
| profiled |
| Programmable |
9600, 19200, 38400 |
| Baud Rate |
| Logging Rate |
8x/sec maximum |
| Software |
Complimentary Aqua4Plus and Aqua4Plus Lite |
| Networking |
32 available addresses per junction |
| w/ batching capabilities (up to 255) |
| File Formats |
.csv / .a4d |
| Power |
| External Power |
9–16 Vdc |
| Pack Required |
| Seametrics Power Pack described below. |
| Other power options are available. |
| Contact Seametrics for details |
| Sensor |
| Measuring Range |
0–25 ppm |
| Accuracy |
1% of reading or 0.02 ppm |
| — whichever is greater |
| Sensitivity / Resolution |
0.01 ppm below 4.00, |
| 0.1 ppm above 4.0 |
| Stability |
0.01 ppm |
| Repeatability |
0.01 ppm |
| Sensor Drift |
Less than 1% per year |
| Temperature Range |
0° C to 55° C |
| Response Time |
95% in less than 60 seconds |
| Maximum Pressure |
100 psi |
Related
You must be logged in to post a comment.