Brass BodiedIndonesia Industrial Parts

Dwyer Series RMVII Rate-Master® Dial-Type Flow Meters

Dwyer RMVII Series Rate-Master® Flow Meters consists of a machined brass meter body that is ideally suited for water flows with ±5% of full-scale accuracy. Body design fits standard 4-1/2″ mounting hole layouts per ANSI B40.1. Inlet and outlet threads are standard 3/4″ female …

By Inaparts Author

19/11/202023/05/2025

Dwyer Series P1 Brass Piston Flow Switch

Flow Controllers Flowmeter

Dwyer P1 Series Brass Piston Flow Switch

BRASS FLOW SWITCH

Fixed Set points, Flow Rates from 0.10 to 1.5 GPM

Dwyer P1 Series Shuttle or piston flow switches are sensors with an electrical contact output at a specific flow rate. Models are used with oil, air, water and gases. Applications include oil …

By Inaparts Author

17/11/202022/05/2025

Flowmeter

Dwyer DS Series In-Line Flow Sensors

Description

Dwyer DS Series In-Line Flow Sensors are two Series of averaging Pitot tubes for compatible gases and liquids that provide accurate and convenient flow rate sensing, for schedule 40 pipe, when purchased with suitable differential pressure gage with appropriate range.

The Series DS-300 Averaging …

By Inaparts Author

17/11/202016/05/2025

Flowmeter

Dwyer Series PFT Paddlewheel Flow Sensor

Description

Dwyer Series PFT Insertion Paddlewheel Flowmeters are used to monitor liquid flow rates in pipes from 1-1/2 to 40″ and is available in brass or 316 SS body. The unit outputs a frequency proportional pulsed or 4 to 20 mA output. The pulse models …

By Inaparts Author

15/11/202026/05/2025

Level Measurement

Bamo GNR5 Glass Level Indicator

Description

\Bamo GNR5 Glass Level Indicator includes a borosilicate glass for direct reading of the level. Fittings include stop valves for easy dismounting even when the tank is full. The lower armature has a drain valve. To limit the shocks on the glass tube we …

By Inaparts Author

26/09/202011/06/2025

Level Measurement

Bamo CNL Side Level Controller

DESCRIPTION

Bamo CNL Side Level Controller consists of a float fixed to a shaft which end has: a magnet on metal models or a magnetic float on PPH models. The float is moved by the liquid and the magnet acts on a reed contact isolated …

By Inaparts Author

15/09/202028/06/2025