Information of Measurement, Equipment, Mechanical, Electrical & Control
Information of Measurement, Equipment, Mechanical, Electrical & Control
The TLC Meter is ideal for profiling conductivity and temperature in wells and open water. It displays accurate measurements of conductivity and temperature on a convenient LCD display. Conductivity measurements are read from 0 to 80,000 µS/cm with readings giving an accuracy of 5% of reading or 100 µS (which ever is greater). Water level […]
About Solinst Model 103 Tag Line Level Meter The Solinst Tag Line uses a weight attached to a laser-marked cable or tape and is principally designed for use during the installation of monitoring wells. The Tag Line also provides a simple method to measure the depth to the bottom of a well. The Tag Line […]
Solinst Oil/Water Interface Meters give clear and accurate measurements of product level and thickness in wells and tanks. Determination of both light (floating) non-aqueous phase liquids (LNAPL) and dense (sinking) non-aqueous phase liquids (DNAPL) is quick and easy. The factory-sealed probe is pressure-proof (up to 500 psi) and tapes are available in a range of […]
Description Capacitance Type Level Switch “KANSAI” ALN-123-3 The Capacitance Type Level Switch KANSAI ALN-123-3 is a capacitance-type level switch designed for precise and reliable level detection of liquids, powders, and granular materials. It operates based on the principle of capacitance change when the presence or absence of a material is detected. The switch is typically used […]
Flowma DCRD1000A1 adopted a 26G high-frequency radar sensor, the maximum measurement range can reach up to 70 meters. The antenna is optimized for further processing, the new microprocessors have higher speed and efficiency and can be done for signal analysis, and the instrumentation can be used for reactors, solid silos, and very complex measurement environments. […]
Flowmasonic WUL 200 Ultrasonic Level Meter is that the level meter’s electronic unit (set parameters, display, the signal output) is separate from the ultrasonic probe, connected by cable each other, the ultrasonic probe is installed in the upper container, the electronic unit (i.e., host) can choose the installation location flexibly, in order to facilitate observation, […]
