Burkert Type 6011 Plunger Valve 2/2 Way Direct-acting

 

 

Burkert Type 6011 Plunger Valve 2/2 Way Direct-acting
Type 6011 Plunger Valve 2/2 Way Direct-acting

 

 

Valve 6011 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. In combination with a cable plug in accordance with industry standard Form B or DIN EN 175301-803 Form C, the valves satisfy protection class IP65. This product can be combined with Cable Plug Type 2507 and Type 2516.

Features

  • Direct-acting and compact small-format valve with diameter of up to DN 2.4
  • Screwed coil system
  • Simple and quick flange or manifold installation
  • Quick coupling (push-in fitting) for plug-in hose connections

     Another Article:

Specifications

Technical Data

Product properties

Dimensions Detailed information can be found in chapter “4. Dimensions” on page 5 of datasheet.
Material

Seal

Body

 

FKM

Standard version: Brass, polyamide (PA), stainless steel 1.4305

Analytical version: Brass, stainless steel 1.4305

Weight Ca. 125 g

Performance data

Duty cycle/single valve when mounted as a block on a manifold 100% continuous rating Intermittent operation 60% (30 min) or with 2 W coil (on request)
Circuit function A

Electrical data

Operating voltage

Standard version

Analytical version

 

24 V DC, 24 V/50 Hz, 110/230 V/50 Hz

24 V DC, 230 V/50 Hz

Voltage tolerance ±10%

Medium data

Medium

Standard version

 

Analytical version

 

Technical vacuum, neutral gases and fluids (e.g. compressed air, water, hydraulic oil)

Neutral/aggressive medium that do not attack the body and seal materials

Viscosity Max. 21 mm²/s
Medium temperature -10…+100 °C

Approvals and certificates

Degree of protection IP65 with cable plug

Product connection

Port connection

Standard version

Analytical version

 

M5, G ⅛, sub-base

G ⅛, sub-base

Electrical connection To DIN EN 175 301-803 Form C for cable plug Type 2516 (see “5.4. Ordering chart accessories” on page 11 of datasheet)

To industry standard connector Form B for cable plug Type 2507 (see “5.4. Ordering chart accessories” on page 11 of datasheet)

Environment and installation

Installation position As required, preferably with actuator upright
Ambient temperature (max.) +55 °C
Installation instructions No oil, grease or silicones to be used as installation aids

Download Datasheet: Burkert Type 6011 Plunger Valve 2/2 Way Direct-acting

Refernce : burkert-usa.com

Be the first to comment