Four Conductor
Model 430 Mercotac Four Conductor
Four Conductors, 2@4amps, 2@30amps
- Disconnects included
- (4 sm., 4 lg.)
- Boot Kit available
- Available with stainless steel ball bearing (430-SS)
Mercotac model 430 is ideal for heated roller applications, where connecting to senstive thermo couple signals and simultaneously powering the heater are required.
| Materials | Stem: Stainless steel |
| Float: Foamed PVC | |
| Head housing | IP 54 |
| Operating pressure | Atmospheric |
| Operating temperature | Between 0 and 40 °C |
| Contact(s) | 1 changeover contact, 4 A, 230 V, potential-free |
| Factory setting |
“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
Model 430 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Model 435 Mercotac Four Conductor
Four Conductors, 4@30amps & 500V
- Disconnects included
- (8 lg.)
- Boot Kit available
- Available with stainless steel ball bearing (435-SS)
| Model No. | Terminals | Voltage | Amp | Max. Freq. | Contact | Max. | Temp | Rotation | Circuit |
| AC/DC | Rating @500VAC | MHz | Resistance | RPM | Max. F (C) /Min. F (C) | Torque (gm-cm) | Separation | ||
| 435 | 4 | 0-500 | 30 | 100 | <1m | 300 | 140 (60) /-20(-29) | 850 | >50M |
| 435-SS | 4 | 0-500 | 30 | 100 | <1m | 300 | 140 (60) /-20(-29) | 850 | >50M |
“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
Model 435 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Model 4100 Mercotac Four Conductor
Four Conductors, 3@100amps & 1@60amps 500V
- Wire connection clamps included
| Model No. | Terminals | Voltage | Amp | Max. Freq. | Contact | Max. | Temp | Rotation | Circuit |
| AC/DC | Rating @500VAC | MHz | Resistance | RPM | Max. F (C) /Min. F (C) | Torque (gm-cm) | Separation | ||
| 4100 | 4 | 0-500 | 3@100,1@60 | 100 | <1m | 100 | 160(70) /-20(-29) | 2500 | >50M |
Connector housing material is anodized aluminum
Model 4100 is typically mounted by the black anodized aluminum body using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. For vertical orientation with the rotating member above, mount to the model 4100 top (gray) plastic bushing.
Six Conductor
Model 630 Mercotac Six Conductor
Six Conductors, 2@4amps, 4@30amps
- Disconnects included
(4 sm., 8 lg.) - Boot Kit available
- Available with stainless steel ball bearing (630-SS)
| Model No. | Terminals | Voltage | Amp | Max. Freq. | Contact | Max. | Temp | Rotation | Circuit |
| AC/DC | Rating @240VAC | MHz | Resistance | RPM | Max. F (C) /Min. F (C) | Torque (gm-cm) | Separation | ||
| 630 | 6 | 0-250 | 2@4/4@30 | 100 | <1m | 300 | 140 (60) /-20(-29) | 700 | >25M |
| 630-SS | 6 | 0-250 | 2@4/4@30 | 100 | <1m | 300 | 140 (60) /-20(-29) | 700 | >25M |
“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
Model 630 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Eight Conductor
Model 830 Mercotac Eight Conductor
Eight Conductors, 2@4amps, 6@30amps
- Disconnects included
(4 sm., 12 lg.) - Boot Kit available
- Available with stainless steel ball bearing (830-SS)
| Model No. | Terminals | Voltage | Amp | Max. Freq. | Contact | Max. | Temp | Rotation | Circuit |
| AC/DC | Rating @240VAC | MHz | Resistance | RPM | Max. F (C) /Min. F (C) | Torque (gm-cm) | Separation | ||
| 830 | 8 | 0-250 | 2@4/6@30 | 100 | <1m | 200 | 140 (60) /-20(-29) | 1000 | >25M |
| 830-SS | 8 | 0-250 | 2@4/6@30 | 100 | <1m | 200 | 140 (60) /-20(-29) | 1000 | >25M |
“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
Model 830 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Reference : mercotac.com
Other Article:
- Power Connectors HP Series- Amphenol
- AC “Z” Series Chassis Mount, XLR, Amphenol-Connectors
- SP Loudspeaker, Amphenol-Connectors
- AP LOUDSPEAKER, AMPHENOL-CONNECTORS
- RCA Series, Amphenol-Plugs & Jacks
- Plugs & Jacks Q Amphenol-Series Plugs
- CWAP Amphenol Circular Connector
- Asiantool A4H Electrical Rotating Connection
- TE ConnectivityHEE/HEE Connector Series for machine and Robotic
- Plugs and Jacks Amphenol T Series Switch Plug Connector
- Type of Connector from TE Connectivity
- flush-mounted Pressure and level Transmitter PZM 100/101 Series HengesbachNCS-162-RF-CH Nanaboshi Connector
- TE Connectivity HA Series
- Sibas Electric heavy-duty Connector
- Type of Connector from TE Connectivity
You must be logged in to post a comment.