WMP-Series Electromagnetic Flow Meter
The WMP Series flow meters are full-bore, plastic-bodied electromagnetic flowmeters designed for flow and usage monitoring applications in 1, 2 and 3-inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals and fertilizers. It is lightweight and easy to install or remove from the pipe for inspection*. With no moving parts, the Magmeter permits unobstructed flow, minimizing flow disturbances and straight pipe requirements.
The WMP Series flow meters can be used in piping configurations where there is little space between the meter and an elbow or valve. The WMP-Series flow meters are resistant to wear from sand and debris found in-ground or surface water. Since there are no bearings or propeller to wear out, maintenance and repair costs are kept to a minimum and it tolerates high flows without damage. A hinged polyethylene cover is included that protects from dust and UV rays while permitting easy access to the flow rate and total display.
The electronics housing can be fitted with cross-drilled screws and seal wire for tamper-evidence. Flow rate and the total can be displayed in a variety of units, customer-selected, and factory-set.
The WMP Series flow meters are used for tracking flow rate and total flow in usage monitoring applications including wells, industrial waste-water, heap leach mining discharge, cooling tower deduct, turf, landscape, and other water reclamation applications. In the event of DC power loss, or when changing batteries, the WMP will retain internal settings and flow total. The WMP101 flow meters is externally powered via a 5-pin connector cable (20ft/6m) which also provides pulse output for use with a variety of Seametrics and other displays and controls for remote reading, data logging, pulse-to-analog conversion, and telemetry applications.
The WMP104 flow meters is a battery-operated unit for use when pulse output is not required. The standard batteries are user replaceable with an approximate 1-2 year life depending on usage. An extended battery life option offers an estimated 2-4 year life depending on usage.*Includes Seametrics NPT fitting kit on 2” and 3” models.
- No moving parts.
- Minimal straight pipe required.
- Built-in rate & total indicator.
- Pulse output (WMP101 only).
Usage monitoring, such as:
- Industrial wastewater discharge.
- Well monitoring.
Contact us : email@example.com or visit to our E-Commerce
- Rotech Limit Switch Boxes
- Potter Electric – Fire Alarms & Fire Sprinkler Systems
- Castel – Refrigeration and Air Conditioning Components
- Seametrics IP100/200 Paddle Wheel Flow Meter
- Pull Cord Switch
- Fluidyne Control Systems
- McCrometer Flow Meter
- Processautomatic – Accurate and Adaptable Flow Measuring Solutions
You must be logged in to post a comment.