ABB Hygienic Master FEH610 Electromagnetic Flow Meter

General

ABB Hygienic Master FEH610 is designed specifically for the food & beverage industries in a cost-effective, robust package. The sensor is fully CIP/SIP cleanable, manufactured from FDA-approved materials, and certified with 3A.

Available as an integral or remote mount design – with or without local LCD display. All versions use a common transmitter with easy to understand the diagnostic message for improved operator efficiency. HygienicMaster FEH610´s variable process connections simplify installation and reduce inventory and replacement costs.

HygienicMaster FEH610 is designed specifically for the food & beverage industries in a cost-effective, robust package. The sensor is fully CIP/SIP cleanable, manufactured from FDA approved materials and certified with 3A.

Available as an integral or remote mount design – with or without local LCD display. All versions use a common transmitter with easy to understand diagnostic message for improved operator efficiency.

HygienicMaster FEH610´s variable process connections simplify installation and reduce inventory and replacement costs. HygienicMaster FEH610 is ideally suited for hygienic standard applications.

Introduction

The industrial standard

Hygienic Master is designed specifically to meet the requirements of the food and beverages and the pharmaceutical industries. The modular design concept offers flexibility, cost-saving operation and reliability whilst providing a long service life and exceptionally low maintenance.

Advanced diagnostic functions

The device monitors its integrity and operability continuously. When limits are exceeded, a corresponding alarm is flagged. Critical states are recognized at an early stage allowing to take appropriate measures.

As a result, productivity is increased and downtimes are avoided. The status messages are classified in accordance with the NAMUR recommendations. In the event of an error, clear text messages appear on the display considerably simplifying and accelerating the
troubleshooting procedure. The gives maximum safety for the process.

Superior and reliable sensor

Hygienic Master provides a great deal of flexibility to the users. The variable process connections simplify installation, reduce inventory requirements and lower replacement costs. The electrodes are embedded into the liner, ensuring a smooth surface without gaps or crevices.

The reinforced PFA liner improves vacuum stability and prevents potential liner deformation. The sensor is fully
CIP/SIP cleanable. A large selection of electrode materials, electrode shapes and process connections makes Hygienic Master ideally suited for any process. Hygienic Master is manufactured from FDA approved materials and certified in accordance with 3A.

Intuitive, convenient navigation

The user-friendly interface allows quick and simple data entry for all process parameters. “Easy Set-up” guides the operator step by step through the menu to set parameters as fast as possible. During configuration, the limit of each parameter is indicated on the
display and invalid configurations rejected.

HygienicMaster is manufactured from FDA approved materials and certified in accordance with 3A.

Universal transmitter – powerful and flexible

All product versions utilize a common electronic to lower inventory costs and spare parts. This same cartridge can be deployed in integral and remote installations and features current, status and pulsed outputs. The backlit, graphical display can be easily rotated
through 270° allowing field teams to customize the display that best fits their needs.

TTG (Through-the-glass) operation allows local operator interface to input short, quick data for all user specific parameters. The universal ABB Human Machine Interface (HMI) simplifies operation, maintenance and training; thereby reducing cost of
ownership and providing one common user experience.

Features

ABB Hygienic Master FEH610 is ideally suited for hygienic standard applications featuring all functions required – no more and no less. The perfect device for everyday applications. Simple and economical.

• ABB common look and feel
  • Easy Set-up function
  • Simple and intuitive configuration
  • Through-the-glass configuration with capacitive switches
  • Backlit, rotatable LCD display
  • Configurable display pages
• SensorApplicationMemory
  • Secure storage of calibration and application specific data
  • Quick change-out of transmitter without reprogramming
• Verification und Online Diagnostic
  • Easy to check based on Fingerprint Technology – the reference signature of the device
  • Service Interval Monitoring. Message at end of service interval
  • Function and Simulation routines for all outputs
• Easy-to-understand diagnostic messages
  • Continuous monitoring of sensor and transmitter integrity
    and process conditions
  • Text in help menu in response to diagnostic results for
    fast and efficient error handling
• One single transmitter fits all design types
  • Integral mount design or remote mount design
  •  With or without LCD display
  •  Universal wide-range power supply
• Easily customizable output signals
  • Analog current output
  •  Two fully configurable digital outputs
• Ideally suited for hygienic applications
  • Field-proven, versatile sensor design
  • Modular sensor design with uniform flowmeter body for simplified spare parts
  • Variable connection concept
  • Wide variety of industry specific process connections
  • Worldwide hygienic & food approvals 3A
  • FDA approved materials
  • Hermetically sealed sensor – optimal Protection against Condensation, vibration and corrosion
  • Smallest outer dimensions
• Simplified Spare Parts Handling
  •  Common transmitter electronic results in significant cost reduction
  • Simplified stock keeping

Measuring principle

Measurements performed by the electromagnetic flowmeter are based on Faraday’s law of induction. A voltage is generated in a conductor when it moves through a magnetic field. This principle is applied to a conductive fluid in the measuring tube through which a magnetic field is generated perpendicular to the flow direction (see Fig. 2).

The voltage induced in the fluid is measured by two electrodes located diametrically opposite each other. This signal voltage is proportional to the magnetic induction, the electrode spacing and the average flow velocity. Considering that the magnetic induction and the electrode spacing are constant values, a proportionality exists between the signal voltage UE and the average flow velocity.

From the equation for calculating the volume flowrate, it follows that the signal voltage is linearly proportional to the volume flowrate. The induced voltage is converted by the transmitter to standardized, analog and digital signals.

ABB Hygienic Master FEH610 General specifications:

• Measuring value error
  – 0.5 % of rate
• Nominal diameter
  – DN 1 to 100 (1/25 to 4 in.)
• Process connection
  – Weld stubs, threaded pipe connections, Tri-clamps, wafer-type, flanges, external threads, flanges in accordance with DIN/EN, ASME, JIS
• Nominal pressure
  – PN 10 to 40, ASME CL 150, 300
• Lining
  – PFA vacuum stable
• Protection class
  – IP 67 or IP 68
• Fluid temperature
  – Up to 130 °C (266 °F)
• Certificates
  – 3A, FDA approved materials

ABB Hygienic Master FEH610 models

• ABB FEH611  Integral mount design
• ABB FEH611 Remote mount design ( FEH612 and  FET612 )

Data Specification

Flowmeter sensor

• Model HygienicMaster  : FEH611, FEH612
• Housing : Integral mount design, remote mount design
• Measuring accuracy for liquids :  0.5 % of measured value
• Permissible measuring medium temperature Tmedium : -25 … 130 °C (-13 … 266 °F)
• Minimum conductivity  : > 20 μS/cm (20 μS/cm for demineralized water)
• Nominal pressure : PN 10 … 40, ASME CL 150, 300, JIS 10K
• Nominal diameter : DN 3 … 100 (1/10 “ … 4 “)
• Process connection
  • Wafer type design: DN 3 … 100 (1/10 … 4“)
  • Flange in acc. with DIN, ASME or JIS: DN 3 … 100 (1/10 … 4“), PN 10 … 40
  • Threaded pipe connection in acc. with DIN 118511): DN 3 … 100 (1/10 … 4“), PN 10 … 40
  • Weld stubs1): DN 3 … 100 (1/10 … 4“), PN 10 … 40
  • Tri-Clamp in acc. with DIN 326761): DN 3 … 100 (1/10 … 4“), PN 10 … 16
  • Tri-Clamp in acc. with ASME BPE1): DN 3 … 100 (1/10 … 4“), PN 10
  • External thread in acc. with ISO 228 / DIN 2999: DN 3 … 25 (1/10 … 1“), PN 16
• Process connection material :  Stainless steel
• Liner material  : PFA (vakuum tight)
• Electrode material : CrNi steel 1.4571 (AISI 316Ti), 1.4539 [904L], Hastelloy B, Hastelloy C, platinum-iridium, tantalum, titanium
• IP rating :
  • Integral mount design: IP 65 / IP 67
  • Remote mount design: IP 65 / IP 67 / IP 68 (sensor only)
• Approvals
  • Pressure Equipment Directive 2014/68/EU :  Conformity assessment in accordance with category III, fluid group 1
  • CRN (Canadian Reg.Number) On request
  • Hygienic design approvals 3A, FDA-approved materials
  • Further approvals At http://www.abb.com/flow or on request.

Flow Transmitter

• Model : FET612
• Housing Integral mount design (see Fig. 1), remote mount design.
• IP rating IP 65 / IP 67
• Cable length Maximum 50 m (164 ft), remote mount design only
• Power supply 100 … 240 V AC (-15 / +10 %), 24 … 48 V DC (-10% / +10 %)
• Outputs
  • Current output: 4 … 20 mA, active
  • Digital output 1: passive, configurable as pulse, frequency or switch output
  • Digital output 2: passive, configurable as pulse or switch output
  • Local display Configurable graphical display (option)
• Approvals
  • Further approvals At http://www.abb.com/flow or on request.

Download Datasheet: HygienicMaster FEH610

Reference: new.abb.com

• Flow Meter Open Channel Untuk PLTU
• Instalasi Flow meter ultrasonic clamp on untuk air dingin mesin chiller
• Prosedur Instalasi Flow Meter Electromagnetic
• Meteran air Jenis flow meter Ultrasonic
• Flow meter ultrasonic clamp on untuk pipa HDPE
• Flow Meter Ultrasonic Jenis Clamp On Untuk Pipa PVC
• Harga Coriolis Mass Flow Meter
• Perlunya Resetting dan Kalibrasi Flow meter secara berkala