Thru-Wall Level Switches GPLS-25, Dinel-Level and Flow Measurement

Thru-Wall Level Switches GPLS-25,
Thru-Wall Level Switches GPLS-25,

Through the wall, level switches GPLS–25 is intended for liquid (conductive and non-conductive) level detection on glass or plastic gauge-pipes, tubes, and tanks. The sensitivity and modes (SO – normally open or SC – normally closed) of the switches can be easily set by placing a magnetic pen on a sensitive spot. The connection is done using two wires directly into a circuit with a relay or to binary input of the control system.

Features

  • For liquids limit level sensing on non-conductive (glass or plastic) gauge-pipes, tubes, and tank walls
  • The sensor is equipped with high-frequency technology, which allows reliable operation even for sensing of the adherent electrically conductive medium
  • Miniature performance in a plastic housing, LED state indication
  • Simple sensitivity setting using a magnetic pen
  • Variants with a fixed cable or a connector
  • Two-wire connection directly to the relay circuit or PLC input

Features of Variants

  • GPLS–25N–
    0 Prismatic (refracted) electrode, shape-adapted to be attached to the gauging pipe or other tubes. The
    fixing of the sensor onto a pipe is provided by plastic straps.
  • GPLS–25N–
    1 Planar electrode, suitable for installation on flat surfaces (e.g. plastic or glass tanks). The sensor
    can be fixed with plastic straps or by a double-sided adhesive layer.

  Another Article:

Specification

Supply voltage 6 … 30 V DC
Supply current – Output type P Max. 0.6 / 7 mA (OFF / ON state)
– Output type S Max. 0.6 mA (OFF state)
Switched current (Min. / Max.) – Output type P 100 mA
– Output type S 3.3 mA / 40 mA
Remanent voltage – ON state – Output type P 1.8 V
– Output type S 6.0 V
Switching frequency Max. 1 Hz
Max. the thickness of the vessel wall – Conductive liquids 8 mm
– Non-conductive liquids with ɛr < 10* 3 mm
Ambient temperature range  -20 … +80°C
The temperature range at the tube or vessel surface / with double-side self-adhesive tape  -20 … +90°C / +60°C
Housing material Plastic  (PP)
Protection class IP67
Connection cable type (Variants “A”) – Output type P PVC 3 x 0.34 mm2
– Output type S PVC 2 x 0.34 mm2
Weight (including 2 m cable) Approx. 60 g

Download Catalog: THRU-WALL LEVEL SWITCHES GPLS-25 Dinel Level and Flow Measurement

Ref: Dinel.cz