AW-Lake Quad-4 Hall Effect Sensor is a microprocessor-based sensor for use with the JV-80/-90KL series of positive displacement flow meters. The Quad-4 sensor can detect both uni- and bi-directional flow. The sensors’ mode of operation is determined by an output selection switch located inside the housing. The Quad-4 detects the rotation of the flow meter […]
Description Delta Mobrey 721 Series Temperature Switch Temperature switches comprise an armored capillary attached to the sensing bulb via a semi-rigid extension on which a compression gland slides to enable various depths of thermowell (pocket) to be accommodated. This sensor is coupled to the microswitch via a precision stainless steel mechanism, the combination of which […]
Description AW-Lake HUB-40EX Hazardous Area Flow Sensor is a frequency output, pickup sensor certified for use in explosion proof areas. The sensor detects the rotation of an approved flow meter’s gears and emits a frequency signal proportional to the flow. The output signal is a square wave pulse, which has a duty cycle of approximately […]
Description The D33 Differential Pressure Transmitters is a low cost solution for the measurement of differential pressure of gases, vapours and liquids with SMART “HART” type transmitter technology. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid. The model […]
Description AW Lake FOP-20 Fiber Optic Sensor system consists of a FOP 20 or FOP-30 Reluctance Pickup with a Fiber Optic Transmitter, Fiber Optic Cable and OPTV-20 Fiber Optic Receiver. The FOP-20 is in an Explosion Proof Housing for use with HPM, JVM, or JVS series flow meters. The FOP-30 is in an intrinsically safe […]
Delta Mobrey S34 Series Differential Pressure Switch is suitable for setpoints between 6mbar and 10bar with maximum working pressures up to 250 bar. The Industrial Series switches were developed in the mid-1990’s to offer customers a robust range of switches suitable for applications where requirements were more standard than those for which the highly configurable Performance […]