Description Delta Mobrey 203 Series Pressure Switch utilises bellows or bourdon tube type sensors that offer a very linear response to pressure change. Designed in the mid-1970s and developed over subsequent years, the Performance Series switch range offers users the broadest range of options, the highest levels of set-point repeatability and the confidence of long term […]
DH-X Dual Hall Effect Sensor AW Lake are microprocessor-based sensors for use with the JV-CG and JV-KG series of positive displacement flow meters. The DH sensors can detect both uni- and bi-directional flow. The sensors’ mode of operation is determined by an output selection switch located inside the housing. The DH detects the rotation of […]
Description Kobold SMO and SMW Displacer Flowmeter / Switch operate in the same way as the flowmeter model SMV-… The extra advantage of universal mounting has been added, that is, the direction of flow can be horizontal (model SMW-..) as well as from top to bottom (model SMO-..). This is achieved with a return spring. […]
Pulsarpoint 200 Pulsar Vibrating Level Switches is a vibrating level switch for bulk solid applications. When solid material comes into contact with the vibrating probe, the frequency of oscillation changes. This is detected and a signal is generated to provide a changing relay output. May be used to signify a material level as being high, […]
General Kem Kuppers LFM microflow meter is suitable for low-viscosity fluids in dosing and filling applications of all kinds. Its measuring element is based on the principle of a double ring piston meter. Thanks to the low pendulum mass and minimal frictional losses, the LFM responds to even the smallest volume flows. Only high-grade stainless […]
Description Kobold SMV Variable Area Flow Meter is based on the principle of the well-known float type flowmeters except for the conventional tapering measuring tube. These patented instruments are provided instead with a cylindrical flow tube with conical slots around the periphery. This eliminates the usual problems of guiding the cylindrical float within a tapering […]