The reflex sensor with background suppression works with red light according to the angle measurement principle and is suitable for the detection of objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Minimal height differences can be detected with the sensors and, for example, various parts can be reliably […]
CS Instruments Residual Oil for Stationary Solution (OIL CHECK according to ISO 8573) of the vaporous residual oil content in the compressed air. By means of a sample taking a representative part volume flow is taken from the compressed air and led to the OIL check. Due to the continuous measurement threshold value exceeding will […]
The through-beam sensor works with red light as well as a transmitter and a receiver. Thanks to their high light intensity, the sensor provides a high degree of operational reliability even with interferences like steam, fog or dust. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as […]
The through-beam sensor works with red light as well as a transmitter and a receiver. Thanks to their high light intensity, the sensor provides a high degree of operational reliability even with interferences like steam, fog or dust. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as […]
Flowmasonic WUL 200 Ultrasonic Level Meter is that the level meter’s electronic unit (set parameters, display, the signal output) is separate from the ultrasonic probe, connected by cable, the ultrasonic probe is installed in the upper container, and the electronic unit (i.e., host) can choose the installation location flexibly, in order to facilitate observation, operation. […]
Flowma DCRD1000A1 adopted a 26G high-frequency radar sensor, the maximum measurement range can reach up to 70 meters. The antenna is optimized for further processing, the new microprocessors have higher speed and efficiency and can be done for signal analysis, and the instrumentation can be used for reactors, solid silos, and very complex measurement environments. […]