Notifier Fire Detection System

NOTIFIER by Honeywell, part of Honeywell International Inc, a Fortune 500 company, is one of the foremost manufacturers and suppliers of equipment for fire detection systems in the world. NOTIFIER has pioneered the policy of developing sophisticated advanced technology fire detection systems, starting with simple conventional products through to large networked multi-panel intelligent systems.

NOTIFIER by Honeywell is committed to the highest standards of service and product quality in line with the needs of a fire safety business, and of course, our operations are accredited to ISO 9001, and our products carry world-wide approvals such as LPCB, Vds, UL, ULC and BOSEC/ANPI etc. Notifier have produced three brochures that highlight the strengths of Notifier by Honeywell, looking at cost effectiveness, flexible systems and networkable systems – relevant to small, medium and large installations.

Notifier Product

Connected Life Safety Services: Honeywell Connected Life Safety Services places connectivity at the heart of fire safety, providing visibility to drive timely and accurate decision making.

Li-ion Tamer

LT-SEN-M: The Li-ion Tamer Rack Monitoring system is a device that monitors lithium-ion battery off-gas events. Off-gas events occur early in the failure mode of lithium-ion batteries and very early detection of these events allow proper mitigation steps to be taken to avoid a catastrophic thermal runaway failure.

Intelligent Addressable Fire

Life protection is paramount to Notifier. We never underestimate the key role our systems play in quickly identifying a potential fire, alerting building occupants to the potential danger and prompting them to take appropriate action. Whatever fire alarm system you require, large or small, we offer the same professional approach and a straightforward way of working.

Control Panels

  • Pearl 1 Loop Addressable Control Panel: The Pearl single loop addressable control panel.
  • Pearl 2 Loop Addressable Control Panel: The Pearl two loop addressable control panel.
  • ID3000 Two – Eight Loop Control Panel: ID3000 two – eight loop intelligent fire alarm panel with compatible components.
  • ID3002 Enhanced Two-Loop Panel: ID3002 Fixed 2 loop intelligent fire alarm panel, fully assembled
  • ID60 Enhanced One-Loop Control Panel: ID60 single loop intelligent fire alarm panel
  • ID61 single loop intelligent fire alarm panel
  • IDR-2A Active Repeater
  • IDR-2P Passive Repeater
  • IDR-6A Active Repeater
  • IDR-CM Compact Mimic Driver
  • IDR-CME Compact Mimic Expansion Board
  • IDR-M Mimic Driver: IDR-M Mimic control PCA Kit
  • IDR-MD Mimic Expansion Board: IDR-MD Mimic Driver and termination board PCA Kit
  • Semi Flush Mounting Bezel for ID50 & ID60
  • Two-Loop Panel Bezel: Semi Flush Mounting Bezel for ID51 / ID61 / ID2000 / ID3000 standard back box

Automatic Fire Detection

  • Opal Optical Smoke Detector
  • Opal SMART2: OPAL Optical smoke & heat detector – SMART2
  • Opal SMART3: OPAL Optical smoke & heat detector with infra-red flame sensing
  • Opal Heat detector, fixed 58C
  • Opal Heat detector (A1R), rate of rise + fixed 58C
  • Opal Heat detector, fixed 78C
  • SMART4 Intelligent Multi-Criteria Detector: SMART4 multi-criteria; optical, thermal and infra-red detector.
  • VIEW Intelligent High Sensitivity Smoke Detector: The VIEW™ high sensitivity, high gain amplifier based intelligent smoke sensor is a unique offering from NOTIFIER that provides extremely high sensitivity to fire conditions, by detecting the earliest particles of combustion.
  • Remote Indicator Unit: The RI/W/3V remote indicator unit is designed for fi re detection systems requiring local indication of an individual or group of fire detectors in alarm.
  • FAAST LT-200 – Single Channel Aspirating System – Loop Connected: Loop based single channel aspirating system
  • Duct Detector Housing: DNRE intelligent non-relay photoelectric duct smoke detector
  • FAAST LT-200 – Single Channel dual detector aspirating system – Loop Connected: Loop based single channel, dual detector aspirating system
  • FAAST LT-200 – Dual Channel Dual Detector Aspirating System – Loop Connected: Loop based dual channel, dual detector aspirating system
  • Opal Addressable Beam Detector: Loop powered reflective IR addressable beam with integral short circuit isolation.

Manual Detection

  • Addressable Indoor Call Point: Addressable call point. M700KACI-FG supplied with Glass element. M700KACI-FF supplied with Flexible Element.
  • Addressable Outdoor Call Point, IP 67.
  • Call point cover.
  • Red Call Point Back Box: Single terminal surface back box for call points.
  • Red Call Point Tray: Flush mounting terminal tray for Manual Call points.

Opal AV Devices

  • Intelligent Detector Base Strobe EN54-23 C – Category: NOTIFIER by Honeywell’s Detector Base Strobe is a modular, high-output loop powered device intended to alert all building occupants of a potential fire. Approved to EN54-23 & EN54-17.
  • Intelligent Sounder VAD Base EN54-23 C – Category Premium and Standard Options: NOTIFIER by Honeywell’s Sounder VAD Base is a modular, high-output loop powered device intended to alert building occupants of a potential fire. The device is available in two variants – premium and standard options. Approved to EN54-3, EN54-17, EN54-23.
  • Opal Addressable Base Sounder is a high quality 32 tone sounder. A choice of output levels and tones make the device suitable for a wide variety of applications.
  • Opal Addressable Base Sounder/VAD integrates a powerful 32 tone sounder and high quality O class compliant VAD in one unit.
  • Opal Addressable Wall Sounder/VID (Visual Indicating Device) integrates a high quality 32 tone sounder with visual indicator into one unit.
  • Opal Addressable Wall Sounder is a high quality 32 tone sounder. A choice of output levels and tones make the device suitable for a wide variety of applications.
  • Opal Addressable Wall Sounder/VAD: Wall mounting, addressable, loop powered sounder EN54-3 approved with EN54-23 O class compliant (W-1.9-1.9) red beacon with clear lens. Built in loop isolation.
  • Opal Addressable Wall VAD is a high quality loop powered device which when triggered by the fire panel emits an intense strobe to give a visible warning to building occupants.
  • Opal Addressable Wall & Ceiling VAD: Notifier’s Wall or Ceiling mount Visual Alarm Device (VAD) is a high quality loop powered beacon intended to alert building occupants of an emergency. Designed and approved to meet EN54-23, the European standard for VADs, the device generates 360° light coverage making it suitable for both wall and ceiling mount applications.
  • Remote Indicator Unit is designed for fi re detection systems requiring local indication of an individual or group of fire detectors in alarm.
  • Wet Based Shroud
  • Addressable Base for detector and AV – concealed when AV unit installed, use for all colours

Interface I/O

  • 701E Single Output Module
  • M710E Single Input Module
  • M721E Dual Input – Single Output Module: Analogue addressable DUAL INPUT monitor and SINGLE OUTPUT relay module
  • M720E Dual Input Module: Analogue addressable DUAL INPUT monitor module
  • Mini-module Addressable Input Module
  • Six Channel Output Module is designed for use in applications where numerous single modules are required
  • Ten Channel Input Module is designed for use in applications where numerous single modules are required
  • M701 240V Switching Module: Loop-powered device controlling an unsupervised double pole output suitable for managing 240VAC loads.
  • M710-CZR Non-Addressable Zone Monitor Module complete with direct decade address entry, LED and isolator.
  • M700 Surface Mount Box
  • M700 Six-Way Surface Mount Box for up to 6 M7xx modules.
  • M700 DIN ClipDIN rail mounting clip for M7xx series modules.
  • Loop Isolator: Loop isolation module
  • BS7273-4 Door Release Module: A compliant solution to meet the requirements of section 5 of BS7273-4 Category A installations.
  • BS7273-4 Door Release System: The NFXDRS-1 system offers a compliant solution to meet the requirements of section 5 of BS7273-4 Category A installations.

Ancillaries

  • IDP-LB1 Loop Booster boxed complete with PSU3A and space for up to 12Ah batteries.
  • Stand-Alone Power Supply 2.5 Amp designed to meet the requirements of EN54-4
  • Stand-Alone Power Supply 5.0 Amp designed to meet the requirements of EN54-4
  • Magnetic Door Hold 24V DC: 24V DC Door Retention Unit
  • Magnetic Door Hold 24V DC Floor Mounted: Door retention unit 24V DC Floor Mounted
  • Magnetic Door Hold 240V: Door retention unit, 240Vac, white.
  • Door Hold Floor Bracket: Floor mounting bracket for door retainers
  • Door Hold Plate assembly (spare): Door Keeper Plate Assembly
  • Transformer Rectifier 2 Amp 24v: Door Retainer Power Supply Unit
  • Transformer Rectifier 4 Amp 24v: Door Retainer Power Supply Unit
  • Fire System Document Box: The robust, lockable steel enclosure offers safe storage and fast access to essential documentation such as that required for compliance with BS5839 pt 1.
  • BS7273-4 Door Release Module: A compliant solution to meet the requirements of section 5 of BS7273-4 Category A installations.
  • BS7273-4 Door Release System: The NFXDRS-1 system offers a compliant solution to meet the requirements of section 5 of BS7273-4 Category A installations.

Wireless Fire Detection and Alarm

  • Wireless SMART3 Detector: Wireless Smart 3 (Optical, Thermal & Infra-Red) detector for the Notifier Agile wireless system.
  • Wireless Optical Detector: Wireless optical smoke detector for the Notifier Agile wireless system.
  • Wireless ROR Heat Detector: Wireless ‘Rate of Rise’ heat detector for the Notifier Agile wireless system.
  • Wireless 58°C Fixed Temperature Heat Detector for the Notifier Agile wireless system.
  • Wireless Sounder for the Notifier Agile wireless system.
  • Wireless Waterproof Manual Call Point for the Notifier Agile wireless system.
  • Wireless Input/Output Module for the Notifier Agile wireless system.
  • Wireless Repeater for extending the range of Notifier Agile wireless networks.
  • Wireless Remote Indicator: Wireless LED indicator for Notifier Agile wireless systems.
  • Wireless USB Dongle for managing Notifier Agile wireless systems
  • Wireless Gateway: Loop-powered Gateway device for Notifier Agile wireless system.
  • Wireless wall mounted sounder Beacon for Notifier by Honeywell

POL-200-TS  is a portable, easy to use device for use during installation, commissioning and maintenance of analogue loops.

Advanced Alarm Management

  • Pearl 1 Loop Addressable Control Panel
  • Pearl 2 Loop Addressable Control Panel
  • Local Silence Button: The NOTIFIER local silence button is a multi-position switch that allows not only sounder test and silencing but also disablement of smoke detection and the indication of disablement. As with other features it is flexible in configuration so that the facilities may be tailored to suit each site.

Non-Addressable Fire

Control Panels: conventional fire alarm panel, complete with fire and fault relay module and capacitor End of Line (EOL) for detector removal monitoring.

  • NFS2-8 Eight Zone
  • NFS2-8 Four Zone
  • NFS2-8 Two Zone

Automatic Detection

  • PhD Detection Range
    • PhD 78 Degree Heat Detector: PhD low profile 800 Series conventional type BS (78C) fixed heat detector
    • PhD Optical Smoke Detector: PhD low profile 800 Series conventional optical smoke detector
    • PhD Optical/Thermal Heat Detector: PhD low profile 800 Series conventional optical and thermal multi criteria smoke detector
    • PhD Rate of Rise Heat Detector: PhD low profile 800 Series conventional type A1R (58C) rate of rise heat detector
    • Non-Addressable Detector Base: Detector mounting base fitted with schottky diode
    • PhD Programming Tool: PhD remote hand held PROGRAMMING tool
    • PhD Remote Tester: PhD remote LASER tester
  • FAAST LT-200 – Single Channel Aspirating System
  • FAAST LT-200 – Single Channel dual detector aspirating system
  • FAAST LT-200 – Dual Channel Dual Detector Aspirating System
  • 6500RE Reflective Beam complete with reflector for up to 70 Metres. Use BEAMLRK for 70 to 100 Metres.
  • Non-addressable duct detector housing

Manual Detection

  • Surface Mount Indoor Call Point with 470 Ohm resistor and N.O. contact
  • Surface Mount Outdoor Call Point with 470 Ohm resistor and N.O. contact

AV Products: EN54-3 and EN54-23 warning devices.

  • Beacons – EN54-23 Approved VADs: Wall or Ceiling mount
  • Sounder Beacons EN54-3 and EN54-23 Approved VADs: Wall or Ceiling mount
  • Sounders – EN54-3 Approved
  • Electronic Solenoid Bell 24V DC Red IP21
  • Electronic Solenoid Bell 24V DC, Red IP44 Weather Resistant
  • Electronic Solenoid Bell 230V AC Grey, IP44 Weather Resistant
  • Electronic Solenoid Bell 12V DC, Grey IP21
  • Base Sounder Ceiling mounting base sounder, four tone (white), no cover.

Ancillaries: Power supply units, Door Holders and associated fire system ancillaries

  • Stand-Alone Power Supply 2.5 Amp designed to meet the requirements of EN54-4
  • Stand-Alone Power Supply 5.0 Amp designed to meet the requirements of EN54-4
  • Magnetic Door Hold 24V DC: 24V DC Door Retention Unit
  • Magnetic Door Hold 24V DC Floor Mounted
  • Magnetic Door Hold 240V: Door retention unit, 240Vac, white.
  • Door Hold Floor Bracket for door retainers
  • Door Hold Plate assembly (spare)
  • Transformer Rectifier 2 Amp 24v: Door Retainer Power Supply Unit
  • Transformer Rectifier 4 Amp 24v: Door Retainer Power Supply Unit
  • Fire System Document Box: The robust, lockable steel enclosure offers safe storage and fast access to essential documentation such as that required for compliance with BS5839 pt 1.
  • Battery 7Ah 12V SLA (Sealed Lead Acid battery)
  • Relay 5 Amp 24V: 24Vdc relay with 5 amp rated V/F changeover contacts (240Vac 3A)

Control Panel Accessories

  • NFS2-8 Eight-Way Input/Output: 8 way input / output card. Provides up to 8 configurable relay outputs or up to 4 command inputs and 4 outputs.
  • NFS2-8 Two-Way Relay Module: Fire & fault relay module for NFS2-8

High Sensitivity Smoke Detection

VESDA®

  • VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications.
  • VESDA-E VES provides four individually configurable alarm levels (Alert, Action, Fire 1 and Fire 2)
  • VESDA-E VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range.
  • VESDA VLI by Xtralis is an industry first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments of up to 2000 m2 (21,520 sq. ft.).
  • VESDA Sensepoint XCL – Large Bore is a gas detection solution that utilizes the ASD pipe network to deliver superior gas detection via multiple hole (multi-point) sampling.
  • VESDA Sensepoint XCL – Micro Bore detector can be paired with your smart device to perform installation, commissioning and maintenance.

FAAST Aspirating smoke Detection

  • FAAST LT-200 – Single Channel Aspirating System
  • FAAST LT-200 – Single Channel dual detector aspirating system
  • FAAST LT-200 – Dual Channel Dual Detector Aspirating System
  • FAAST LT-200 – Single Channel Aspirating System – Loop Connected
  • FAAST LT-200 – Single Channel dual detector aspirating system – Loop Connected
  • FAAST LT-200 – Dual Channel Dual Detector Aspirating System – Loop Connected

ASD Accessories

  • Automatic Purging Unit: Fully integrated and compact solution with user-selectable preventative or event triggered purging programs for preventing pipe network contaminant blockages.
  • Refrigerated Storage Sampling Kit
  • FAAST Sampling Hole Identification System: ASD Clips

OSID Open Area Detection

OSID Imager: OSI-10 Imager 8 degree FOV OSI-90 Imager 80 degree FOV
OSID Emitter: OSE-SP-01 Emitter battery powered OSE-HP-01 Emitter high power battery OSE-SPW Emitter wired 24Vdc OSE-HPW Emitter high power wired 24Vdc
OSID Wire Guard: This steel cage is designed to protect OSID Imagers and Emitters from vandalism and accidental damage.
OSID Environmental Housing: Custom designed IP 66, NEMA 4-4X protective and environmental housings
OSID Light Shield Imager: OSI-LS light shield is available for Imagers to prevent saturation from direct or reflected light.
OSID Anti-Condensation Film: OSID Emitters are equipped with an acrylic lens and are not normally prone to condensation. However in some extremely moist environments, the Emitter lens can be fitted with an anti-condensation film.

Flame Detection

The Honeywell conventional flame detection range comprises of 2 families: the FSX range being suitable for industrial type applications, Zone 1 hazardous area units and the FSL range being Zone 2 hazardous area units.

FSL100 Series: FSL100 Series Flame Detectors. UV, UV/IR, IR3
FSX Series: FS20X and FS24X Flame Detectors

Voice Alarm, Public Address and Loudspeakers

The Honeywell Voice Alarm system is supported by the appropriate EN54 standards and is complimented by a range of certified loudspeakers to ensure the system is both compliant with regulations and will perform reliably.

Emergency Voice Communication Systems

Network 16 is designed to ensure simplicity of future expansion, a maximum of 16 outstations of various types can be controlled from one master panel.
EVCS Compact 5: Ideal for smaller installations, maximum of five lines. Easy to install.
EVCS Network 8: Ideal for larger installations, offering up to 256 lines of communication. High capability system.
Emergency Assist Alarm Systems For use in Disabled toilets

Extinguishant Panels

NFS3-EXT: Single area 3 zone extinguishing control panel compliant with BS EN12094-1 Class A.
Extinguishing Repeater Panel: 10 lamp extinguishing control repeater.

Paging Systems

Response Plus: The Response Paging System offers the latest innovations in wireless paging and monitoring. It’s a cost effective and flexible system that provides the ability to quickly respond to activated alarms
Response Aid: The Response Aid Paging System provides an easy-to-use, cost effective solution to support deaf and hard of hearing people in case of a fire emergency.
Response Pagers: The Response pagers are simple, compact and discreet personal devices for short messages.
TFT Pagers: Designed for busy staff who rely on instant communication, the rechargeable TFT pager is the most robust pager for your paging system.
Alphanumeric Watch Pager: The Response wrist watch pager is the ideal solution for people on the move offering greater comfort and flexibility to receiving incoming alerts.
Accessories: A supporting range of Response Paging system Input buttons in order to create alarms to pagers from different locations.

Emergency Lighting Central Battery Systems

Central battery systems are intended to energise emergency escape lighting and other essential safety equipment in the case of failure to the normal power supply. Notifier offers both AC/AC and AC/DC variants, suitable for most applications.

Source: Notifier fire systems

Another Article:

Share
%d bloggers like this: