4″ Electric Pro Flapper Double Diaphragm Pump

Pump up to 300 GPM with the electric driven Pro Flapper Series Mud Sucker 4FAC-EC-DD. Using next generation Mud Sucker EPDM flapper valve technology access the flappers in seconds

• Runs dry without damage
• Solids Handling capabilities up to 2.5″
• Designed for tough industrial pump applications

4″ Engine Pro Flapper Double Diaphragm Pump

Pump up to 300 GPM with the engine driven Pro Flapper Series Mud Sucker®4FAC-M-DD. Using next generation Mud Sucker EPDM flapper valve technology access the flappers in seconds

• Runs dry without damage
• Solids Handling capabilities up to 2.5″
• Severe duty EPDM flappers
• Electric start gas or diesel engines
• Designed for tough industrial pump applications

6″ Electric Pro Flapper Double Diaphragm Pump

Pump up to 325 GPM with the electric driven Pro Flapper Series Mud Sucker® 6FAC-EC-DD. Using next generation Mud Sucker EPDM flapper valve technology access the flappers in seconds

• Runs dry without damage
• Solids Handling capabilities up to 2.5″
• Designed for tough industrial pump applications

6″ Engine Pro Flapper Double Diaphragm Pump

Pump up to 325 GPM with the engine driven Pro Flapper Series Mud Sucker® 6FAC-M-DD. Using next generation Mud Sucker EPDM flapper valve technology access the flappers in seconds

• Runs dry without damage
• Solids Handling capabilities up to 2.5″
• Severe duty EPDM flappers
• Electric start gas or diesel engines
• Designed for tough industrial pump applications

2″ Pro Series Electric Double Diaphragm Pump

Pump up to 40 GPM with the 2″ electric double diaphragm pump Mud Sucker® 2B-EC-DD. Custom options, piping configurations and accessories available

• Select from 1.5″ or 2″ connections
• single phase, three phase or explosion proof motors
• Custom pump configuration
• Financing options available

2″ Pro Series Engine Double Diaphragm Pump

Mud Sucker 2B-M-DD gas or diesel engine double diaphragm pumps feature up to 40 GPM of wastewater transfer capabilities.

• Solids Handling capabilities up to 1.5 “
• Professional engineering design
• Select from eight drive options
• Financing available

2″ Pro Series AODD Double Diaphragm Pump

Pump up to 40 GPM with the Pro Series Mud Sucker 2B-AP-DD AODD pump. Gas or diesel engine options available. Using next generation Mud Sucker ball valve technology, access the suction and discharge areas within seconds.

• 1.5″ or 2″ connection
• Runs dry without damage
• Uses check balls to manage slurry, waste oil, wastewater
• Gas or diesel engines available
• Financing available

2″ Pro Series Hydraulic Double Diaphragm Pump

Mud Sucker 2B-HP-DD Hydraulic Double Diaphragm Pump.

3″ Pro Series Electric Double Diaphragm Pump

Pump up to 160 GPM with the Pro Series Mud Sucker 3B-EC-DD, electric driven double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids Handling capabilities up to 1.625″
• Professional ball valve design
• Control panels and floats also available
• Single phase, three phase and explosion proof drives availalble

3″ Pro Series Engine Double Diaphragm Pump

Pump up to 160 GPM with the gas or diesel driven Mud Sucker 3B-M-DD Pro Series  double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids Handling capabilities up to 1.625″
• Professional ball valve design
• Gas or diesel driven
• Electric start
• Trailer mounted or stationary

3″ Pro Series AOD Double Diaphragm Pump

Pump up to 160 GPM with the Pro Series Mud Sucker 3B-AP-DD, air driven double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs. Mud Sucker B-DD Series pumps are engineered for higher solids fluid transfer for like pulp and paper slurry transfer, mining waste pumps and more.

• Solids handling capabilities up to 2 ¼”
• 3″ connection
• Designed to pump tough slurries or debris laden liquids Air silencers, regulators and gauges available

3″ Pro Series Hydraulic Double Diaphragm Pump

Pump up to 160 GPM with the Pro Series Mud Sucker 3B-HP-DD, hydraulic driven double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids Handling capabilities up to 1 5/8”
• Professional ball valve design
• Portable or stationary models available

4″ Pro Series Electric Double Diaphragm Pump

Pump up to 220 GPM with the Pro Series Mud Sucker 4B-EC-DD, electric driven double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids handling capabilities up to 1.75″
• Professional ball valve design
• Cast iron pump body
• Single phase, three phase or explosion proof motors

4″ Pro Series Engine Double Diaphragm Pump

Pump up to 220 GPM with the gas or diesel driven Mud Sucker 4B-M-DD Pro Series double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids handling capabilities up to 1.75″
• Professional ball valve design
• Gas or diesel driven
• Electric start trailer mounted or stationary

4″ Pro Series AOD Double Diaphragm Pump

Pump up to 220 GPM with the Pro Series AODD pump, Mud Sucker 4B-AP-DD. Using check ball technology to manage the toughest waste pumping jobs.

• 4″ connection
• Solids handling to 1¾”
• Regulators, silencers and gauges available

4″ Pro Series Hydraulic Double Diaphragm Pump

Pump up to 220 GPM with the hydraulic driven Mud Sucker 4B-HP-DD Pro Series double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids handling capabilities up to 1¾”
• Professional ball valve design
• Trailer mounted or stationary

Mud Sucker® mechanical AOD pump manufacturers selection. Air operated diaphragm pumps (AOD) serve the needs of processing industries, petrochemical production and more with a choice of materials of construction for your application. This pump series is available with FDA compliant models, abrasion resistant models and corrosive fluid pumping configurations. Mud Sucker Air driven series are available with 1″(38 mm), 1-1/2″ (38 mm), 2″ (50 mm) and 3″ (76 mm) connection sizes. Application specific materials of construction such as FDA compliant internals, abrasion resistant flappers and diaphragms for chemicals, solvents and non solvent pumping applications are available.

Models

2″ AOD Diaphragm Pump

Pump up to 20 GPM with the Mud Sucker 2FAC-AP AOD diaphragm pump

• 2″ air driven diaphragm pumps
• Regulator and silencer available
• Designed for facilities with air hose lines

2″ AOD Double Diaphragm Pump

Pump up to 40 GPM with the Mud Sucker® 2FAC-AP-DD, AODD double diaphragm pump

• 1.5″ or 2″ air driven double diaphragm pumps
• Regulator and silencer available
• Designed for facilities with air hose lines

3″ Standard AOD Pump

Pump up to 80 GPM with the standard flapper series Mud Sucker 3FAC-AP, air driven diaphragm pump.

• Solids Handling capabilities up to 2 ¼”
• Heavy duty 3″ diaphragm pump
• Pump up to 80 GPM
• Designed to pump tough slurries or debris laden liquids

3″ AOD Pro Flapper Diaphragm Pump

Pump up to 80 GPM with the Mud Sucker 3FAC-AP, AOD diaphragm pump

• 3″ air driven diaphragm pumps
• Regulator and silencer available
• Designed for facilities with pump air hose lines

3″ AODD Pro Flapper Double Diaphragm Pump

Pump up to 160 GPM with the Mud Sucker® 3FAC-AP-DD. Using next generation Mud Sucker EPDM flapper valve technology access the flappers in seconds.

• 3″ air driven double diaphragm pumps
• Regulator and silencer available
• Mobile or stationary models
• Designed for facilities with pump air hose lines

2″ Pro Series AOD Diaphragm Pump

Pump up to 20 GPM with the Pro Series 2″ AOD pump, Mud Sucker 2B-AP.  Using check balls to manage slurry, waste oil and wastewater, the tough Mud Sucker can help you improve productivity at your job site.

• 1.5″ or 2” Connection
• Pump Up to 20 GPM
• Solids Handling capabilities up to 1¼”
• Available with silencers and oil regulators
• Severe duty slurry and solids handling

2″ Pro Series AODD Double Diaphragm Pump

Pump up to 40 GPM with the Pro Series Mud Sucker 2B-AP-DD AODD pump. Gas or diesel engine options available. Using next generation Mud Sucker ball valve technology, access the suction and discharge areas within seconds.

• 1.5″ or 2″ connection
• Runs dry without damage
• Uses check balls to manage slurry, waste oil, wastewater
• Gas or diesel engines available
• Financing available

3″ Pro Series AOD Diaphragm Pump

Pump up to 80 GPM with the Pro Series Mud Sucker 3B-AP, air driven diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids Handling capabilities up to 2 ¼”
• Heavy duty 3″ diaphragm pump
• Pump up to 80 GPM
• Designed to pump tough slurries or debris laden liquids
• Air silencers, regulators and gauges available

3″ Pro Series AOD Double Diaphragm Pump

Pump up to 160 GPM with the Pro Series Mud Sucker 3B-AP-DD, air driven double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs. Mud Sucker B-DD Series pumps are engineered for higher solids fluid transfer for like pulp and paper slurry transfer, mining waste pumps and more.

• Solids handling capabilities up to 2 ¼”
• 3″ connection
• Designed to pump tough slurries or debris laden liquids Air silencers, regulators and gauges available

4″ Pro Series AOD Diaphragm Pump

Pump up to 110 GPM with the AOD Mud Sucker 4B-AP diaphragm pump. Heavy duty ball check technology with a cast iron pump body. Access the internals in seconds.

• 4″ Connection Pump
• Solids Handling capabilities up to 1¾”
• Available with optional pulsation dampeners
• Regulators, silencers and gauges available

4″ Pro Series AOD Double Diaphragm Pump

Pump up to 220 GPM with the Pro Series AODD pump, Mud Sucker 4B-AP-DD. Using check ball technology to manage the toughest waste pumping jobs.

• 4″ connection
• Solids handling to 1¾”
• Regulators, silencers and gauges available

Hydraulic Diaphragm Pumps

Wastecorp® manufactures hydraulic powered pumps that are typically used by food processing plants, oil refineries, waste treatment plants and other facilities that have hydraulic fluid lines. Wastecorp hydraulic pumps use re-circulated high pressure fluid which transmits though the motor to drive the generators. This produces the power to drive the pump. The speed range and flow of the pump can be completely controlled by using Wastecorp’s optional hydraulic flow control valve.

Models

2″ Hydraulic Diaphragm Pump

Pump up to 20 GPM using a hydraulic motor with the Mud Sucker 2FAC-HP. Custom options, piping configurations and accessories available

• 2″ hydraulic driven diaphragm pumps
• Designed for truck fleets or facilities with hydraulic fluid lines
• Custom pump configuration

2″ Hydraulic Double Diaphragm Pump

Pump up to 40 GPM using a hydraulic motor with the Mud Sucker® 2FAC-HP-DD. Custom options, piping configurations and accessories available

• 2″ hydraulic driven double diaphragm pumps
• Designed for facilities or vehicles with hydraulic fluid lines
• Custom pump configuration
• Financing options available

Standard 3″ Hydraulic Diaphragm Pump

Pump up to 80 GPM with the standard flapper series Mud Sucker 3FA-HP, hydraulic diaphragm pump. Original advanced flapper valve system.

• Solids Handling capabilities up to 2 ¼”
• Heavy duty 3″ diaphragm pump
• Wheel kits and other accessories available

3″ Hydraulic Pro Flapper Diaphragm Pump

Pump up to 80 GPM with the Pro Flapper Series Mud Sucker 3FAC-HP hydraulic diaphragm pump.

• 3″ hydraulic driven diaphragm pumps
• Designed for truck fleets or facilities with hydraulic fluid lines
• Inline or standard piping configuration

3″ Hydraulic Pro Flapper Double Diaphragm Pump

Pump up to 160 GPM with the hydraulic driven Pro Flapper Series Mud Sucker® 3FAC-HP-DD. Using next generation Mud Sucker EPDM flapper valve technology access the flappers in seconds

• Pump up to 160 GPM
• Designed for tough industrial pump applications
• Pump solids up to 2¼” solids

4″ Hydraulic Pro Flapper Diaphragm Pump

Pump up to 110 GPM with the Pro Flapper Series Mud Sucker 4FAC-HP hydraulic diaphragm pump.

• 4″ connection
• 2½” solids handling capability
• Designed for truck fleets or facilities with hydraulic fluid lines
• Inline or standard piping configuration

2″ Pro Series Hydraulic Diaphragm Pump

Pump up to 20 GPM with the Pro Series Mud Sucker 2B-HP hydraulic diaphragm pump with check balls to manage waste pumping.

• 1.5″ or 2” Connection
• Pump Up to 20 GPM
• Solids Handling capabilities up to 1¼”
• Severe duty slurry and solids handling

2″ Pro Series Hydraulic Double Diaphragm Pump

Mud Sucker 2B-HP-DD Hydraulic Double Diaphragm Pump.

3″ Pro Series Hydraulic Diaphragm Pump

Pump up to 80 GPM with the Mud Sucker Pro Series  3B-HP, hydraulic diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Max. solids to 2¼”
• 3″ connection
• Select from inline or standard piping options
• Heavy duty ball valve design

3″ Pro Series Hydraulic Double Diaphragm Pump

Pump up to 160 GPM with the Pro Series Mud Sucker 3B-HP-DD, hydraulic driven double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids Handling capabilities up to 1 5/8”
• Professional ball valve design
• Portable or stationary models available

4″ Pro Series Hydraulic Diaphragm Pump

Pump up to 110 GPM with the hydraulic driven Pro Series Mud Sucker 4B-HP. Using check ball technology to manage the toughest waste pumping jobs.

• 4″ connection
• Max. solids to 1¾”
• Heavy duty ball valve design
• Available with optional pulsation dampeners (shown)

4″ Pro Series Hydraulic Double Diaphragm Pump

Pump up to 220 GPM with the hydraulic driven Mud Sucker 4B-HP-DD Pro Series double diaphragm pump. Using check ball technology to manage the toughest waste pumping jobs.

• Solids handling capabilities up to 1¾”
• Professional ball valve design
• Trailer mounted or stationary

Grout Pumps

Wastecorp is a manufacturer of Sludge Sucker®  grout pumps that can be operated manually or through air power.  Sludge Sucker’s are designed for resin and cementitious based material such as grout with a slump of 10” or more (not recommended for epoxy-type grout). It is also recommended to use products such as “Slick Willie” or “Slick-Pak” to help reduce line pressure and reduce overall friction in the pump and hose system.

Single Diaphragm Grout Pumps

Models

1.5″ Grout Pump

Sludge Sucker manual grout pump with 1.5″ connection.

• Heavy duty pump design
• Designed and manufactured in North America
• 3.5 gallon (0.47 ft³) galvanized hopper funnel
• Mounted High-density polyethylene mobility slab with anti-vibration feet
• Aluminum male camlock included on discharge side
• Recommended for pumping grout containing resin and cementitious materials

1.5″ Grout Pump Pro Package

Sludge Sucker manual grout pump with 1.5″ connection

• Heavy duty pump design
• Designed and manufactured in North America
• 3.5 gallon (0.47 ft³) galvanized hopper funnel
• Mounted High-density polyethylene mobility slab with anti-vibration feet
• Aluminum male camlock included on discharge side
• Recommended for pumping grout containing resin and cementitious materials

2″ Grout Pump

Sludge Sucker 2FA-GH Grout Pump With 2″ Connection manufactured by Wastecorp Pumps in USA and Canada.

2″ Grout Pump Pro Package

Sludge Sucker 2FA-GH Grout Pump Package – Hose and Grout Injector Wand.

Pneumatic Grout Pump

Sludge Sucker Pneumatic grout pump.

• Heavy duty pump design
• Designed and manufactured in North America
• 3.5 gallon (0.47 ft³) galvanized hopper funnel
• Mounted High-density polyethylene mobility slab with anti-vibration feet
• Aluminum male camlock included on discharge side
• Recommended for pumping grout containing resin and cementitious materials

Double Diaphragm Grout Pumps

Models

1.5″ Double Diaphragm Grout Pump

Sludge Sucker 1.5FA-GH-DD double grout pump for professional heavy duty grouting applications. Designed for construction professionals and public works applications.

• Completely assembled Sludge Sucker® Double Diaphragm Grout Pump
• 3.5 gallon galvanized hopper funnel
• Aluminum camlock on discharge

1.5″ Double Diaphragm Grout Pump Pro Package

The Sludge Sucker Pro Package includes the 1.5FA-GH-DD  professional series double grout pump, grout wand and hose. With capacities up to 40 GPM, the Sludge Sucker Double Diaphragm Grout Pumps enhance your ability to pump higher volumes of grout for larger casings, pilings, door jams and other commercial grouting jobs. You double your capacity when compared to Sludge Sucker Single diaphragm models

2″ Double Diaphragm Grout Pump

Sludge Sucker 2FA-GH-DD double grout pump for professional heavy duty grouting applications. Designed for construction professionals and public works applications

• Completely assembled Sludge Sucker® Double Diaphragm Grout Pump
• 3.5 gallon galvanized hopper funnel
• Aluminum camlock on discharge

2″ Double Diaphragm Grout Pump Pro Package

Sludge Sucker 2FA-GH-DD double grout pump for professional heavy duty grouting applications. Designed for construction professionals and public works applications.

• Completely assembled Sludge Sucker® Double Diaphragm Grout Pump
• 3.5 gallon galvanized hopper funnel
• Aluminum camlock on discharge

Double Diaphragm Pneumatic Grout Pump

Sludge Sucker Pneumatic grout pump

• Heavy duty pump design
• Designed and manufactured in North America
• 3.5 gallon (0.47 ft³) galvanized hopper funnel
• Mounted High-density polyethylene mobility slab with anti-vibration feet
• Aluminum male camlock included on discharge side
• Recommended for pumping grout containing resin and cementitious materials

Door Frame Grout Pumps – Single Diaphragm

Models

• 34-48″ Door Frame Grout Pump
• 48-60″ Door Frame Grout Pump
• 60-72″ Door Frame Grout Pump

Door Frame Grout Pumps – Double Diaphragm

Models

• 34-48″ Double Diaphragm Door Frame Grout Pump
• 48-60″ Double Diaphragm Door Frame Grout Pump
• 62-72″ Double Diaphragm Door Frame Grout Pump

Hand Pumps

The history of the hand pump goes back hundreds of years. Our inspiration for improvement comes from the generations of engineers and innovators who have set out to design and build a better hand pump. This time tested design does not require fuel or electricity (only your own). Sludge Sucker® hand pumps use manual diaphragm pump technology to help with pumping out man holes, public works applications, telecommunications companies, the marine industry and emergency dewatering applications everywhere.

Wastecorp® hand pumps combine light weight materials with the latest innovations like BUNA-N flappers and diaphragms to produce long term manual pumping solutions for hundreds of industries. Our hand pumps are now available in waste containment models that allow you to pump both into or out of the tank.

Models

Basic Hand Pump

Wastecorp’s Sludge Sucker basic hand pump with a 1″ connection.

• Buna N Flapper valve with molded steel reinforcing plate
• Universal handle for either vertical or horizontal operation
• Available in multiple connection styles and sizes
• Polished heavy gauge stainless steel pipe with contoured handle grip

1.5″ Hand Pump

Sludge Sucker®  Pro Series hand pump with 1.5″ connection designed to pump out sewage or toilets.

• 1½” connection size
• 12 GPM max
• 1” dia solids handling

1.5″ Hand Pump Mounted On Platform Stand

Sludge Sucker®  Pro Series hand pump with 1.5″ connection mounted on steel support stand

• 1½” connection size
• Steel base
• 12 GPM max
• 1” dia solids handling

1.5″ Double Diaphragm Hand Pump

• 1.5″ Connection Size
• Capacity: 40 GPM (2.4 qt/stroke)
• Max Output Pressure: 15 psi
• Discharge Head: 15′ vertical/25′ horizontal

1.5″ Double Diaphragm Hand Pump Pro Package

Sludge Sucker® Pro Series hand pump package with 1.5″ connection and suction and discharge hoses.

• 1.5″ Connection Size
• Capacity: 40 GPM (2.4 qt/stroke)
• Discharge Head: 15′ vertical/25′ horizontal
• Includes noncollapsible hose and connections

2″ Hand Pump Mounted On Platform Stand

Sludge Sucker® Pro Series Hand pump with 2″ connection mounted on steel support stand.

• 2″ Connection Size
• 25 GPM Max
• 1.5” dia Solids handling

2″ Hand Pump Mounted on PVC Slab

Sludge Sucker®  Pro Series hand pump with 2″ connection mounted on PVC mobility slab.

• 2″ Connection Size
• 25 GPM Max
• 1.5” dia Solids handling

2″ Double Diaphragm Hand Pump

Sludge Sucker® Pro Series double hand pump with 2″ connection mounted on PVC mobility slab.

• 2″ Connection Size
• 40 GPM Max
• 1.5” dia Solids handling

Double Disc Pumps

Wastecorp is an OEM manufacturer of double disc pumps. The Sludge Pro® Double Disc Pump product line is offered in a wide range of models from single , double,  triplex and quadruplex configurations. Sludge Pro’s pump up to 1600 US GPM and feature a leak free design with no regular maintenance required.  With Wastecorp, you have a choice between induced flow clack valve style double disc pumps and reciprocating style double disc pumps with a check ball. Wastecorp offers long lasting trunnions, discs and check valves for the ultimate pumping experience.

WP Series

The Sludge Pro WP Series double disc pump is designed to pump municipal and industrial solids handling applications. The WP Series is based on the traditional reciprocating positive displacement principle. In this situation,  the pump valve is independent from the pumping element. Their displacement per stroke is great, so the WP Series pumps typically operate at lower speeds.

Models

• 3″ Single Disc Space Saver Pump
• 4″ Single Disc Pump
• 6″ Single Disc Space Saver Pump
• 3″ Double Disc Space Saver Pump
• 4″ Double Disc Space Saver Pump
• 6DDWP- 6″ Double Disc Pump
• 6″ Triple Disc Pump
• 6″ Quad Disc Pump

Mobile Double Disc Pumps

Behold the dawn of a new age of mobile double disc pumps. The  patented Sludge Pro® M-Series is available with any series of Sludge Pro® that we manufacture.
You select from either single axle or tandem axle trailers and smart options like electric brakes and government approved lighting packages

The first portable double disc pump for mobile use. DOT compliant trailer mounted or skid mounted. Designed to pump municipal sewage, industrial wastewater with solids,  food processing waste and mining slurry.

MK Series

astecorp has elevated double disc pump technology to the next level. Meet the Sludge Pro® double disc pump MK Series based on the induced flow principle. Designed for sewage and sludge pumping at WWTP’s, food processing waste pumping and heavy duty industrial slurry pumping.

Sludge Pro MK Series pump up to 1600 GPM and feature a leak free design with no regular maintenance required. We offer long lasting trunnions,  for the ultimate pumping experience. We also offer a try and buy program to replace your current double disc pump, rotary lobe pump, plunger pump or progressive cavity pump.

Models

4DDMK Double Disc Pump

The Sludge Pro 4DDMK double disc pump is designed to pump sewage and sludge up to 165 GPM

• Induced flow double disc pump
• 4″ connection
• Direct replacement for other makes/models
• Runs dry without damage
• Bet driven or direct drive
• Discharge head up to 75 psi

6DDMK Double Disc Pump

The Sludge Pro 6DDMK double disc pump is designed to pump sewage and sludge up to 550 GPM

• Induced flow double disc pump
• 6″ connection
• Runs dry without damage
• Bet driven or direct drive
• Pump up to 550 GPM

8DDMK Double Disc Pump

The Sludge Pro 8DDMK double disc pump is designed to pump municipal sewage and industrial sludge up to 1100 GPM.

• Induced flow double disc pump
• 8″ connection
• Runs dry without damage
• Bet driven or direct drive
• Pump up to 1100GPM

10DDMK Double Disc Pump

The Sludge Pro 10DDMK double disc pump is designed to pump sewage and sludge up to 1650 GPM.

• Induced flow double disc pump
• 10″ connection
• Runs dry without damage
• Bet driven or direct drive
• Pump up to 1650 GPM

Honey Wagon

Wastecorp is an ISO 9001 certified honey wagon manufacturer. Honey wagon waste containment and sanitation systems are available in several sizes ranging from 25 gallon (96 liters) to over 5000 gallon (18,900 liters) tank sizes and beyond. All models are designed for heavy use pumping applications at campgrounds, marinas, yacht clubs, commercial aviation, railroads, waste vegetable oil collection, industrial remediation pumping, municipal and military liquid waste containment, hydro power plant pumping and much more. All DT models now feature LED lighting packages and break-away trailer switches.

Mobile Honey Wagons

Wastecorp’s Pro Series mobile honey wagons are available in cart style, ATV mount and trailer mounted configurations. You select from utility trailer models and DOT compliant models. All DOT compliant models include electric brakes, LED lighting packages and breakaway switch. Select from 25-5000 gallon tank sizes and more.

Models

25 Gallon – 50 Gallon Pump Out Caddy

Wastecorp’s 25 gallon pump out caddy is ideal for marine docks with space restrictions. This pump out system system is commonly used at self service marina pump out stations. Equipped with a Sludge Sucker manual diaphragm pump, you choose between 1.5″ or 2″ connection sizes. The entire package includes everything you need to start pumping. Designed and manufactured by Wastecorp Pumps in North America

• Sludge Sucker Pro waste pump
• 25 gallon – 50 gallon tank
• All hoses and accessories included
• Financing available

50 Gallon Mobile Pump Out

50 gallon waste tank. Wheel Mounted. Includes Mud Sucker pump technology, all hoses and custom features

• 50 gallon waste tank
• Your choice of 2″ pump
• Electric, engine, air or hydraulic drive system
• Exclusive three way valve system
• Pump into or out of the tank
• Turf tire, ATV package or standard industrial tires
• Professional grade quality and engineering
• Financing available

100 Gallon – 200 Gallon Pump Outs

Select 100 gallon, 150 gallon or 200 gallon honey wagons with your choice of electric, engine, air or hydraulic drives. Select from ATV tow packages, trailer mounted or turf tire mounted

• Select from ATV, trailer or turf tire configurations
• Exclusive three way valve system
• Pump into or out of the tank
• 2″ or 3″ Mud Sucker pump options
• Select either  100 gallon, 150 gallon or 200 gallon tanks
• Electric, engine, air or hydraulic drives systems

325 Gallon Honey Wagon

325 gallon waste tank, single axle galvanized trailer. Includes Mud Sucker pump technology, all hoses and custom features.

• 325 gallon waste tank
• Your choice of 2″, 3″ or 4″ pump
• Electric, engine, air or hydraulic drive system
• LED lighting package for DOT models
• DOT Trailer, utility trailer or skid mounted models available
• Professional grade quality and engineering

525 Gallon Honey Wagon

525 gallon waste tank, double axle galvanized trailer or utility trailer. Includes Mud Sucker pump technology, all hoses and custom features

• 525 gallon waste tank
• Your choice of 2″, 3″ or 4″ pump
• Electric, engine, air or hydraulic drive system
• LED lighting package for DOT models
• DOT Trailer, utility trailer or skid mounted models available
• Professional grade quality and engineering
• Financing available

1025 Gallon Honey Wagon

1025 gallon honey wagon waste containment system. Pump septic waste, waste oil, wastewater, industrial fluid and more. Galvanized frame and deck. Optional storage bins and pump configurations

• 1025 gallon tank
• 2″ or 3″ pumps
• Trailer or skid mounted available
• Financing available

1625 Gallon Honey Wagon

1625 gallon waste tank with triple axle galvanized trailer. Includes Mud Sucker pump technology, all hoses and custom features.

• 1625 gallon waste tank
• Your choice of 2″, 3″ or 4″ pump
• Electric, engine, air or hydraulic drive
• LED lighting package
• Trailer or skid mounted available
• Professional grade quality and engineering
• Financing available

2035 Gallon Honey Wagon

2035 gallon waste tank, dually axle trailer. Air brakes or electric. Your choice of Mud Sucker pump technology.

• 2035 gallon waste tank
• Select from single or double diaphragm pumps
• Electric, engine, air or hydraulic power
• LED lighting package
• Air or electric brakes
• Financing available

5000 Gallon Honey Wagon

5000 gallon waste tank, ultra high capacity waste containment system. Air brakes, goose neck or dually axle trailer system

• 5000 gallon waste tank
• Your choice of 2″, 3″ or 4″ pump
• Electric, engine, air or hydraulic drive system
• LED lighting package
• DOT Trailer or skid mounted models available
• Professional grade quality and engineering
• Financing available

Skid Mounted Honey Wagons

Skid mounted waste containment systems also called honey wagons are suitable for mounting in a truck, ATV trailer, concrete pad or on land. All skid mounted honey wagons feature Mud Sucker diaphragm pump technology which is designed and manufactured by Wastecorp.

Select from multiple tank sizes, pump options and configurations. Tanks available from 25 gallons – 5000 gallons and pump connection sizes range from 1.5″ – 4″. Single and double diaphragm Mud Sucker pumps available.

Models

• 50 Gallon Skid Mounted Pump Out
• 100 Gallon – 200 Gallon Pump Out
• 325 Gallon Skid Mounted Honey Wagon
• 525 Gallon Skid Mounted Honey Wagon
• 1025 Gallon Skid Mounted Honey Wagon
• 1625 Gallon Skid Mounted Honey Wagon
• 2035 Gallon Skid Mounted Honey Wagon

Dual Tank Honey Wagons

Wastecorp’s new waste containment plus fresh water distribution system, helps you plan ahead with up to 2000 gallon waste collection tanks and a separate high pressure fresh water tank up to 500 gallons. This system is designed to pump and contain crude oil, oil slurry, select hazardous liquids and general wastewater. These systems are used as flood pumps, disaster management pumps, pumps for FEMA, flood control pumps, hurricane management pumps, sanitation in floods oil spill pumps and more. Dual tank honey wagons include a heavy duty 2021 model Mud Sucker FAC Series pump and a high pressure water pump with premium Honda engines. Pump waste up to 80 GPM and distribute fresh water up to 256 GPM. See video and product features for more information

Models

300 Gallon Dual Tank Honey Wagon

Waste tank and water tank in one unit. 325 gallon waste tank and up to 200 gallon fresh water tank. Electric, engine, air or hydraulic drives. Designed for waste pumping and wash down services

• 325 gallon waste tank
• Select from 50 gallon – 200 gallon water tanks
• Two pumps: One waste, one water
• Mud Sucker waste pump technology standard
• High pressure water pump
• Electric, engine, air or hydraulic drive systems
• Financing available

500 Gallon Dual Tank Honey Wagon

Dual purpose waste pumping tank and water pumping system. 500 gallon waste and up to 300 gallon water in one unit

• Waste Pump and high pressure water pump
• 525 gallon waste tank
• 50 gallon-500 gallon water tank options
• Exclusive Mud Sucker waste pump technology
• Electric, engine, air or hydraulic drives systems
• Financing available

1025 Gallon Dual Tank Honey Wagon

Waste pump tank and water tank in one unit. 1025 gallon waste tank and up to 325 gallon fresh water tank. Electric, engine, air or hydraulic drives. Designed for waste pumping and wash down services.

• 1025 gallon waste tank
• Select from 150 gallon- 500 gallon water tanks
• Two pumps: One waste, one water
• Mud Sucker waste pump technology
• High pressure water pump
• Electric, engine, air or hydraulic drive systems
• Financing available

1600 Gallon Dual Tank Honey Wagon

Waste tank and water tank in one unit. 1625 gallon waste tank and up to 500 gallon fresh water tank. Electric, engine, air or hydraulic drives. Designed for waste pumping and wash down services

• 1625 gallon waste tank
• Select from 150 gallon, 200 gallon or 300 gallon water tanks
• Two pumps: One waste, one water
• Mud Sucker waste pump technology
• High pressure water pump
• Electric, engine, air or hydraulic drive systems
• Financing available

Water Trailers

Water trailers are designed for on-site water delivery, potable water use, dust control on construction sites, heavy equipment washing, race track use, fire suppression, wild fire control and parking lots. With a choice of high pressure or trash pump models manufactured by Wastecorp, you’ll get the water delivery solution you need by a proven manufacturer. Wastecorp water trailers are designed and manufactured in the United States and Canada.

Trailer Mounted Water Trailer

Trailer mounted water trailers are available for use on public roads (DOT compliant) or only on your property depending on the model you select. DOT compliant models include LED lighting, electric or air brakes, single, tandem, triple axle or dually axle configurations

Wastecorp is an ISO 9001, ISO 14001 certified trailer mounted water trailer manufacturer. Our water trailers are corrosion resistant and designed for heavy professional use like government and industry.  Wastecorp water trailers are designed and manufactured locally

Models

50 Gallon – 200 Gallon Water Trailers

Your choice of 50 gallon – 200 gallon tanks . Mounted on an ATV towable frame with turf tires.

300 Gallon Water Trailer

325 gallon trailer mounted water trailer. Single axle galvanized trailer with rear sprayers and optional side sprayers.

525 Gallon Professional Water Trailer

525 gallon trailer mounted water trailer. Double axle, galvanized trailer with rear sprayers and optional side sprayers.

1025 Gallon Trailer Mounted Water Trailer

1025 gallon trailer mounted water trailer. Double axle galvanized trailer with rear sprayers and optional side sprayers

1600 Gallon Trailer Mounted Water Trailer

1600 gallon trailer mounted water trailer. Triple axle galvanized trailer with rear sprayers and optional side sprayers.

2000 Gallon Trailer Mounted Water Trailer

2000 gallon trailer mounted water trailer. Dully axle trailer with rear sprayers and optional side sprayers.

2600 Gallon Trailer Mounted Water Trailer

2600 gallon trailer mounted water trailer with dually axle and optional air brakes available.

Big Foot Water Trailer

Water trailers specifically designed for farm, ranch and agricultural use.

Water Trailers For Government Use

Wastecorp is a manufacturer of water trailers for government specifications. We work with municipalities, public works agencies, Army, Army Corps of Engineers, Navy, Air Force, Coast Guard, prisons, hospitals and other institutions to design the water trailer or water skid for watering landscaping, providing mobile drinking water solutions, water for construction sites and more. Wastecorp only uses the highest quality components to manufacture water trailers that outlast

Skid Mounted Water Tanks

Skid mounted water tanks do not have wheels or an axle. However, you can move a skid mounted water tank with an optional lifting bail. Generally these types of water tanks are used for landscaping watering, facilities management, special events, amusement parks, fresh water distribution for marathons, auxiliary fire prevention and more. Skid mounted water tanks are used to mount in trucks, on a concrete pad or on land and are available in a variety of sizes. Accessories include: fork lift pockets, lifting bail, NSF compliant water tanks and lines, FDA compliant drinking water tanks, black, green or translucent tank options and higher volume pumps.

Models

150 Gallon Skid Mounted Water Tank

• 150 gallon tank
• Trash Flow® Model: TFX-2M, 2” x 2” centrifugal
  pump powered by a 4HP Honda GX120 gas engine
• Standard spray hose 2″x25′
• Standard fill hose: 2″x20′
• Delivery garden spray hose 5/8″ x 50′
• Accessory and hose bin

300 Gallon Skid Mounted Water Tank

• 300 gallon tank
• Trash Flow® Model: TFX-2M, 2” x 2” centrifugal
  pump powered by a 4HP Honda GX120 gas engine
• Standard spray hose 2″x25′
• Standard fill hose: 2″x20′
• Delivery garden spray hose 5/8″ x 50′
• Accessory and hose bin

525 Gallon Skid Mounted Water Tank

• 525 gallon/1893 litre tank
• Trash Flow® Model: TFX-2M, 2” x 2” centrifugal
  pump powered by a 4HP Honda GX120 gas engine
• Standard spray hose 2″x25′
• Standard fill hose: 2″x20′
• Delivery garden spray hose 5/8″ x 50′
• Accessory and hose bin

1025 Gallon Skid Mounted Water Tank

1025 gallon water tank, all hoses and and fitting. Mount in your truck or on land.

• Trash Flow® model: TFX-2M, 2” x 2” centrifugal pump powered by a 4HP Honda GX120 gas engine
• Standard spray hose
• 2″x25′ Standard fill hose
• 2″x20’Delivery garden spray hose 5/8″ x 50′

1600 Gallon Skid Mounted Water Tank

1600 gallon water tank, all hoses and and fitting. Mount in your truck or on land.

• 1635 gallon/6057 litre tank
• Trash Flow® Model: TFX-2M, 2” x 2” centrifugal
  pump powered by a 4HP Honda GX120 gas engine
• Standard spray hose 2″x25′
• Standard fill hose: 2″x20′
• Delivery garden spray hose 5/8″ x 50′
• Accessory and hose bin

2000 Gallon Skid Mounted Water Tank

2000 gallon skid mounted water tank. Mount in a truck or on land.

• 2000 gallon tank
• Trash Flow® Model: TFX-2M, 2” x 2” centrifugal pump powered by a 4HP Honda GX120 gas engine
• Hoses and accessories

2600 Gallon Skid Mounted Water Tank

2600 gallon water tank, all hoses and and fitting. Mount in your truck or on land.

• Trash Flow® Model: TFX-2M, 2” x 2” centrifugal
  pump powered by a 4HP Honda GX120 gas engine
• Standard spray hose 2″x25′
• Standard fill hose: 2″x20′
• Delivery garden spray hose 5/8″ x 50′
• Accessory and hose bin

Water Buffalo Manufacturer

A water buffalo or water wagon is a product to store and transport water for livestock, farms, ranches, industrial facilities and auxiliary fire prevention. A water buffalo does not use a pump. Water is gravity fed to your required location. NSF compliant tanks and lines available for drinking water. Tank sizes are available ranging from 200 gallons to 5000 gallons. Water buffalos do not include pumps, valves or piping. They simply transport fresh water in tanks made from resins that meet FDA specifications. NSF compliant water lines, tanks and components also available.  Tanks sizes range from 300-5000 gallon sizes and are available in black, green and standard translucent. Trailers range from our standard galvanized highway rated models, goose neck and dually trailers (shown above) to manage full tank loads over 2000 gallons

Models

500 Gallon – 1600 Gallon Water Buffalos

Water buffalo, clean water transportation system (no pump) in 500-1600 gallon sizes

• NSF drinking water, black, green or translucent tanks
• DOT compliant trailers
• LED lighting packages
• Electric brakes

Drinking Water Trailer Manufacturer

Wastecorp is an OEM manufacturer of FDA compliant drinking water trailers using NSF plumbing. We supply government and industry with mobile potable water solutions reducing dependance on single-use plastic bottles. Wastecorp drinking water trailers are customer built using premium components to outlast weather and daily use conditions. Specialized water circulation and water chilling models are available along with translucent or black tanks, custom filling stations and much more.

Models

Mobile Hand Washing Station

Wastecorp mobile hand washing stations are designed to improve personal hygiene for outdoor use  for government and businesses. Touchless features allow the user to wash hands with warm water almost anywhere. Select from skid mounted or trailer mounted units.

Mobile Drinking Water Systems

WT Series mobile drinking water solutions provide high volume portable water delivery to any public event including marathons, street festivals, outdoor concerts, emergency services and more. You select the tank size required ranging from 300-2500 gallons. We offer various configurations including stainless steel bottle filling faucets, FDA compliant tanks and plumbing. We also offer fluid chilling so that you can control the temperature of the drinking water

Viper™ Jetter Trailers

Wastecorp is a leading manufacturer of jetter trailers used for the residential, municipal and industrial sewer and pipe cleaning.  With a wide range of  tank and pump sizes , your next jetter pump trailer feature custom components so you get exactly what you need.

Models

525 Gallon Jetter Trailer

525 gallon trailer mounted jetter trailer. Hot and cold water jet options available.

800 Gallon Jetter Trailer

Jetter System with Vacuum Waste tank. 800 gallon waste and 200 gallon water jet function. Trailer mounted or skid mounted jetters available. Hot and cold water jet options available

2000 Gallon Waterjet Trailer

2000 gallon Waterjet System with Vacuum Waste tank. Trailer mounted or skid mounted jetters available. Hot and cold waterjet options available

Self-Priming Trash Pumps

Trash Flow® self priming trash pumps are designed for municipal, industrial and commercial fluid transfer applications. Trash Flow products are available in connection sizes ranging from two inches to 12 inches with fluid handling capabilities up to 6300 GPM. Whether you need to pump trash laden wastewater or hog waste, depend on Wastecorp engineered, Trash Flow self priming trash pump.

Trash Flow trash pumps transfer municipal and industrial wastewater, select solids handling applications and more. Trash Flow pumps are available in 2″-12″ sizes and can transfer up to 6300 GPM. Select from standard electric and engine driven trash pump models. Wastecorp also manufactures high head pump models and dry prime pumps.

Self-Priming Dry Prime Pumps

Trash Flow Dry Prime pumps are built for emergency bypass and dewatering applications. The unique oil bath technology, ensures that the mechanical seal is always lubricated in its own chamber. This safeguard allows the pump to run dry indefinitely without damage. Trash Flow TFV Series pumps can pass 3” spherical solids and produce suction lifts to 28 Ft. This enhanced priming system, minimizes effluent discharge into the environment.

Electric Dry Prime Trash Pumps

Wastecorp’s TFV dry prime pumps are used in a wide range of applications in the Municipal, Agricultural, Oil Gas , Chemical and Industrial sectors .  The heavy duty bearing design can be mounted with electric motor’s or SAE engine-mount configurations.

Engine Self-Priming Dry Prime Pumps

Trash Flow Dry Prime pumps are built for emergency bypass and dewatering applications. The unique oil bath technology, ensures that the mechanical seal is always lubricated in its own chamber. This safeguard allows the pump to run dry indefinitely without damage. Trash Flow TFV Series pumps can pass 3” spherical solids and produce suction lifts to 28 Ft. This enhanced priming system, minimizes effluent discharge into the environment.

Models

• Electric Trash Flow Dry Prime Pump
• 4″ Dry Prime Pump
• 8″ Dry Prime Pump
• 6″ x 4″ High Head Dry Prime Pump – Minimal Solids
• 6″ High Head Dry Prime Pump
• 8″ High Head Dry Prime Pump
• 4″ Entry Level Dry Prime Pump
• 6″ Dry Prime Pump
• 12″ Dry Prime Pump
• 6″ x 4″ High Head Dry Prime Pump
• 10″ High Head Dry Prime Pump
• 12″ High Head Dry Prime Pump

Self-Priming Wet Prime Pumps

Wastecorp Pumps is an ISO 9001 and ISO 14001 certified wet prime pump manufacturer. Wastecorp’s Trash Flow wet prime pumps are available in connection sizes ranging from 2″-12″ with fluid handling capabilities up to 5500 GPM. Trash Flow wet prime pumps are designed for municipal and industrial wastewater and solids pumping. Replace other makes with a new Trash Flow and enjoy no piping changes.

TFCC Series

Stationary self priming centrifugal pumps with connection sizes from 3″ – 10″

Models

• 2″ Self Priming Centrifugal Pump
• 3″ Self Priming Centrifugal Pump
• 4″ Self Priming Centrifugal Pump
• 6″ Self Priming Centrifugal Pump
• 8″ Self Priming Centrifugal Pump
• 10″ Self Priming Centrifugal Pump
• 12″ Self Priming Centrifugal Pump

TFCC-H Series (High Head)

Wastecorp Pumps is a manufacturer of pumps for high discharge head requirements. We work with engineers, end users and pump distributors for high head pumping applications in the municipal, industrial and commercial pump markets. Products include solids and thickened slurry high head pumps like dry prime pumps, self priming centrifugal pumps, double disc pumps and plunger pumps.

Models

• 3″ High Head Self Priming Centrifugal Pump
• 4″ High Head Self Priming Centrifugal Pump
• 6″ High Head Self Priming Centrifugal Pump

TFCC-VP Series

Trash Flow TFCC-VP self-priming pump is an advanced high-pressure design capable of displacing liquids at greater pressures than ever before. It can achieve 100% greater pressure and 45% increased flow over our standard TFCC series.

Models

• 3″ Self Priming Centrifugal Pump
• 4″ Self Priming Centrifugal Pump
• 6” x  4″ Self Priming Centrifugal Pump
• 6″ Self Priming Centrifugal Pump

TFCC-M Series (Engine Driven)

rash Flow® engine driven trash pumps are powered by diesel engines to provide municipal or industrial pumping power when needed. Our self priming centrifugal pumps are available in 2″,3″, 4″,6″, 8″, 10″ and 12″ connection sizes and can pump up to 5500 GPM. DOT compliant trailers are available with electric brakes and LED lighting packages. You can also select stationary models or our silent pump models the Trash Flow Husher with a sound attenuated enclosure.

Models

• 3″ Pro Series Engine Driven Trash Pump
• 4″ Pro Series Engine Driven Trash Pump
• 8″ Pro Series Diesel Driven Trash Pump
• 12″ Pro Series Diesel Driven Trash Pump
• Trash Flow Silent Pump System
• 6″ Entry Level Engine Driven Trash Pump
• 6″ Pro Series Engine Driven Trash Pump
• 10″ Pro Series Engine Driven Trash Pump
• Vacuum Assist Pumps

Contractor Trash Pumps

Trash Hog® and Water Hog® pumps are high quality self-priming pumps engineered to meet the demanding needs of municipal, industrial and utility crews in a compact robust design.

TFX Water Hog® : Semi-trash dewatering pumps suitable for light abrasives with small solids concentrations. Great for landscaping , irrigation and draining manhole vaults

TFX Trash Hog®: Trash dewatering pumps for dirty liquids containing larger solids and abrasives. Great general purpose pump for debris laden ponds, rivers, septic, manhole pits and general construction sites.

Models

• High Pressure Trash Pump – 2″ Connection
• High Pressure Trash Pump – 2″ x 1″ Connection
• Semi-Trash Pump – 2″ Connection
• Semi-Trash Pump – 3″ Connection
• Semi-Trash Pump – 4″ Connection
• Trash Pump – 2″ Connection
• Trash Pump – 3″ Connection
• Trash Pump – 4″ Connection

Lift Station Manufacturer

Wastecorp Pumps provides a complete line of pre-engineered packaged pump stations for any type of water and wastewater lift application. Select from above ground, below ground and auto-start pump stations. The Wastecorp Trash Flow provides a patented shimless adjustable wear plate carrier which comes standard on every pump station.

Models

• Above Ground Lift Station
• Below Ground Lift Stations
• Auto-Start Lift Stations

Vacuum Pumps

Wastecorp Pumps is an OEM manufacturer of vacuum pumps and vacuum trailers. Is your facility looking for an alternative to vac truck services? Wastecorp’s Super Duty brand vacuum pump systems can help your facility with higher suction pumping applications while saving money with your own system. Super Duty vacuum pumps transfer septic waste, restaurant waste trap grease, waste oil, wastewater and more. You select from skid mounted, trailer mounted or trolley mount compact configurations. Wastecorp’s innovative vacuum pump systems are also available with fresh water rinse systems built into a separate chamber within the tank. This enables you to wash down portable toilets, stadium seating, public spaces and more for the ultimate in clean, sanitary spaces.

Vacuum Trailers

Vacuum trailers are an alternative to large vac trucks. With Super Duty vacuum pumps you can tow up to a 2000 gallon trailer to your job sites with optional tilt tanks and dual compartment waste plus water systems.  Vacuum trailers with high suction  pumps are available up to 200 GPM.

Models

• 60 Gallon Super Duty Vacuum Pump
• 65 Gallon – 250 Gallon Vacuum ATV Wagon
• 115 Gallon Vacuum Trailer
• 300 Gallon Vacuum Trailer
• 450 Gallon Vacuum Trailer
• 500 Gallon Vacuum Trailer
• 1000 Gallon Vacuum Trailer
• 1200 Gallon Vacuum Trailer
• 1600 Gallon Vacuum Trailer
• 2000 Gallon Vacuum Trailer
• 3000-5000 Gallon Vacuum Trailer
• Tilt-N-Go Vacuum Pump

Slide In Vacuum Pumps

Wastecorp Super Duty slide-in vacuum pumps. Pump capacity ranges from 60-200 GPM. Tank sizes up to 2500 gallons. Slide in and bolt down units for trucks and trailers. Can be bolted to a concrete pad, temporary structure, truck chassis or custom configuration.

Models

• 300 Gallon Skid Mounted Vacuum Pump
• 400-100 Gallon Skid Mounted Vacuum Pump
• 500 Gallon Skid Mounted Vacuum Pump
• 800 Gallon Skid Mounted Vacuum Pump
• 1000 Gallon Skid Mounted Vacuum Pump
• 1200 Gallon Skid Mounted Vacuum Pump
• 1600 Gallon Skid Mounted Vacuum Pump

Engine Vacuum Pumps

Wastecorp’s Super Duty engine driven vacuum pumps are the ultimate productivity enhancer for your operations. You get built in North America quality with the finest materials of construction for pump out equipment that’s made-to-last. All models you see below are completely customizable with gas or diesel engines and several CFM (vacuum power) ranges available starting at 127 CFM to 530 CFM and beyond.

Models

• 115 Gallon Vacuum Trailer
• 300 Gallon Vacuum Trailer
• 450 Gallon Vacuum Trailer
• 1000 Gallon Vacuum Trailer
• 1200 Gallon Vacuum Trailer
• 1600 Gallon Vacuum Trailer
• 2000 Gallon Vacuum Trailer
• 3000-5000 Gallon Vacuum Trailer
• Tilt-N-Go Vacuum Pump
• 300 Gallon Skid Mounted Vacuum Pump
• 400-100 Gallon Slide-In Vacuum Pump
• 800 Gallon – 100 Gallon Dual Compartment Vacuum Pump

Vacuum Trucks

Wastecorp Vacuum Trucks are designed for customers who require a dedicated vehicle with high suction vacuum systems.  Select from chassis mounted pump and steel tank systems ranging from 300 gallons to over 3000 gallons with up to 1000 CFM suction power blower or vacuum pumps.

EV Vacuum Pump Vehicle

Dedicated electric vehicle (EV) with Super Duty Vacuum Pump system. Motrec, Yale, Payloader, John Deere, Taylor Dunn, Bobcat, Polaris available

Truck Chassis Mounted Vacuum Pumps

Chassis mounted vacuum truck systems. Available for International, Hino, Isuzu, International, Chevy, Ram 3500, Ford F-350,F-450, F-550

Models

Enclosed Cab Vacuum Pump Out Vehicle

An enclosed cab pump out vehicle designed for facilities maintenance.

Dual Compartment Vacuum Pumps

Why not have the best of both worlds with a waste tank and fresh water source all in the same system? In this innovative design, the tank is divided between waste and fresh water holding areas complete with their own pump. You also have a standard sight glass/tube on each to visually identify the volume in each tank. Select from 100,150, 200 and 260 gallon fresh water compartments

Models

• 200 Gallon – 100 Gallon Dual Compartment Vacuum Pump
• 300 Gallon – 150 Gallon Dual Compartment Vacuum Pump
• 400 Gallon – 200 Gallon Dual Compartment Vacuum Pump
• 540 Gallon – 260 Gallon Dual Compartment Vacuum Pump
• 800 Gallon – 100 Gallon Dual Compartment Vacuum Pump
• 1500 Gallon – 100 Gallon Dual Compartment Vacuum Pump
• 300 Gallon – 50 Gallon Dual Compartment Vacuum Pump

Marina Vacuum Pump

Marina vacuum pump manufacturer. Wastecorp designs, engineers and manufactures high suction power vacuum pumps for marine applications. Select from dock mounted pumps outs to portable models that you can maneuver around your marina.

Models

60 Gallon Marine Vacuum Pump

Marine vacuum pump system with control panels pump and tank. Super Duty WVP-60 is a professional grade vacuum pump designed to pump out boats at marinas.

65 Gallon Marine Vacuum Pump

Marine vacuum pump system with control panels pump and tank. Super Duty WVP-65 is a professional grade vacuum pump designed to pump out boats at marinas.

115 Gallon Vacuum Pump System

The WVP-115 series is a professional marine vacuum pump with a stationary mount as standard equipment.  Also available with ATV tow package or trailer mounted. Designed and manufactured by professional pump manufacturer Wastecorp Pumps.

WVP-250

The TVP-250 trailer mounted series is a professional vacuum pump mounted on an ATV tow package. Also available in skid mounted or trailer mounted. Designed and manufacturer by professional pump manufacturer Wastecorp Pumps

WVP-450

The WVP 450 is a professional marina vacuum pump designed to pump septic, waste oil, wastewater and more.

Dual Tank – Vacuum Pump

Pump out up to six different areas the same time with Super Duty dual tank vacuum pumps

Hydro Excavation Equipment

Wastecorp hydro-excavation trailers and equipment provide an alternative to large hydro-vac trucks so you can maneuver easily around your jobsite, utilities or urban areas. Wastecorp hydrovac trailers are ideal for trenching, potholing, working around utilities, water and sewer repairs, highway and street repairs, working around oil and gas lines and much more. Select from hydraulic booms up to 3500 CFM suction power, tool racks and automated tilt and rear door opening.

Models

TVP-800HV-DT Hydrovac Trailer

Hydro-excavation trailer with vacuum blower pump system.

Pump Parts

Looking for parts for your waste pump or water pump? Wastecorp may be able to help. Wastecorp stocks parts for your diaphragm pump, plunger pump, trash pump and double disc pumps and vacuum pump products.

Diaphragm Pump Parts

Wastecorp manufactures Genuine OEM factory parts for all Mud Sucker pump models from 1996-2021.  We also supply diaphragms and spare parts kits for a wide range of other diaphragm pump makes. We offer diaphragms in hundreds of sizes, gaskets, spare parts kits and accessories for over 150 pump makes and models

Replacement Diaphragms

Spare Diaphragms for Any Pump Make. Wastecorp’s replacement diaphragms are available for almost any make or model of diaphragm pump including Mud Sucker pumps. Our diaphragms are offered in two styles: rubber / fabric reinforced or thermoplastic (TPE).

Models

• 14 ¾” Diaphragm For All Makes
• 13” Diaphragm For All Makes
• 11 ¾” Diaphragm For All Makes
• 8” Diaphragm For All Makes
• 6.5” Diaphragm For All Makes
• 5.5” Diaphragm For All Makes
• 14 ¾” Neoprene Diaphragm For All Makes
• 13” Neoprene Diaphragm For All Makes
• 10 ½” Diaphragm For All Makes
• 7” Diaphragm For All Makes
• 6” Diaphragm For All Makes
• 5” Diaphragm For All Makes

Diaphragm Pump Rebuild Kits

Do you have an older diaphragm pump that needs parts? Are you interested in a quote on rebuilding or repairing your diaphragm pump? You have come to the right place. Wastecorp is an expert on Mud Sucker Diaphragm Pumps but we also repair and replace parts for many other diaphragm pump makes.

Models

CH&E Diaphragm Pump Replacement Parts

Mud Hog Pump Replacement Parts

Double Disc Pump Parts

Models

• Double Disc Trunnion
• Disc Replacement
• Disc Pump Overhaul Kit

Mud Sucker Pump Parts

Whether you own one of our innovative B Series Professional diaphragm pumps or high-performance flapper valve models, we have the premium quality parts to keep it pumping at optimum performance. In fact, we’ve got the same parts it was born with. From diaphragms to check balls to other diaphragm pump parts, our genuine factory parts for Mud Sucker pumps are specifically designed, made, and tested to keep our products operating at peak performance. Get the most out of your Mud Sucker by using the parts that were made for it.  Fix aging parts by browsing our selection of diaphragm pump parts and hardware to find the replacements you need.  Performing regular maintenance on your Mud Sucker will help you get your job done faster and more efficiently.

• 2FA Series Pump Parts
• 2FA-DD Series Pump Parts
• 3FA Series Pump Parts
• 3FA-DD Series Pump Parts
• 4FA Series Pump Parts
• 4FA-DD Series Pump Parts
• 2B Series Pump Parts
• 2B-DD Series Pump Parts
• 3B Series Pump Parts
• 3B-DD Series Pump Parts
• 4B Series Pump Parts
• 4B-DD Series Pump Parts

Plunger Pump Parts

Wastecorp is a manufacturer of plunger pump parts. We offer replacement parts for Sludge Master Plunger Pumps, Komline Sanderson (KS Plunger Pumps), Carter Plunger Pumps and Marlow Plunger Pumps. Pump packing, connecting rods, ball valves and complete factory rebuild kits are available.

Connecting Rod

Wastecorp replacement connecting rods for plunger pumps are available in 7″-9″ and 11″ sizes

Plunger

Plunger sizes available in 7″,8″,8.5″,9″, 11″ and 12″. We manufacture our plungers in class 40 cast iron.

Plunger Pump Packing

Wastecorp Plunger Pump packing is available in graphite flax, Teflon with U-cup, Kevlar and super strength fiber reinforced.

Pump Accessories

Get pump accessories for your new pump. All custom accessories are designed for Wastecorp pump models and most other pump makes. From hoses and strainers to quick fit connections, you’ll get high quality components to simplify your fluid transfer job.

Models

CAMLOCK, 2″ MALE (PART A)

Aluminum Male Adapter x FNPT

Pro Marine Pump Out Attachment

The Pro marine pump out attachment from Wastecorp is designed for high traffic marinas. This pump out package includes the Universal marine adapter premium suction gun and check valve to prevent back flow and mess

Wastecorp Pump Mover

Think you can only move a trailer mounted pump, honey wagon or water trailer only with a vehicle? Not any more with Wastecorp’s pump mover. This aluminum time saver quickly connects to the pump’s tongue.

ATV WAGON KIT W/ 2″ BALL HITCH

Heavy Duty ATV Wagon Kit with 2″ Ball Hitch suitable for various Mud Sucker diaphragm pumps

ATV WAGON KIT W/ 2″ BALL HITCH, 3FA/3FAC

Heavy Duty ATV Wagon Kit with 2″ ball hitch for towing 3″ Mud Sucker diaphragm pumps

Ball Valve Extraction Tool

Extraction tool for pumps with check balls. Easily extract the ball valve for inspection or replacement with Wastecorp’s ball valve extraction tool. Made in USA and Canada.

Basic RV Pump Out Hose Kit

A basic hose and adapter kit to pump out black and grey water from most RV’s, Campers and trailers

CAMLOCK, 3″ MALE (PART A)

Aluminum 3″ male adapter x 3″ FNPT camlock

CAMLOCK, 4″ MALE (PART A)

Aluminum 4″ male adapter x MNPT

GULPER WITH CLEAR SWING CHECK VALVE ASSEMBLY, 2″ MNPT

A suction tool for diaphragm and trash pumps. Designed for hotels and subways, remove water, septic waste and more after storms with reduced employee contact with substance. Also used for remediation services.

HOSE, DISCHARGE BROWN LAYFLAT, 2″ x 50′

Brown PVC layflat hose, 2″ x 50 ft with aluminum part C & E camlocks

HOSE, DISCHARGE BROWN LAYFLAT, 3″ x 50′

Brown PVC layflat hose, 3″ x 50 ft with aluminum part C & E camlocks

HOSE, DISCHARGE BROWN LAYFLAT, 4″ x 50′

Brown PVC layflat hose, 4″ x 50 ft with aluminum part C & E camlocks

HOSE, NON-COLLAPSIBLE EPDM (GRN/BLK), 2″ x 20′

Non-collapsible EPDM (Green/Black) Hose, 2″ x 20 ft complete with aluminum Part C & KC camlock fittings

HOSE, NON-COLLAPSIBLE EPDM (GRN/BLK), 3″ x 20′

Non-collapsible EPDM (Green/Black), 3″ x 20 ft length complete with aluminum Part C & KC camlocks

HOSE, NON-COLLAPSIBLE EPDM (GRN/BLK), 4″ x 25′

Non-collapsible EPDM (Green/Black), 4″ x 25 ft length complete with aluminum Part C & KC camlocks

Potty Suction Wand, 1-1/2″ Male Cam x 4ft

Portable toilet servicing tool. Attach the potty wand to any pump and prevent contact with unsanitary septic systems.

Potty Suction Wand, 2″ Male Cam x 4ft

Portable toilet servicing tool. Attach the potty wand to any pump and prevent contact with unsanitary septic systems.

RV Sewer Adapter Assembly Package

RV sewer adapter assembly package is an advanced tool to pump out RV’s and campers.

RV SEWER ADAPTER, 2″ MALE CAMLOCK

Universal RV Sewer Adapter for pumping out grey and black water tanks from RV’s and campers.

RV Sewer Adapter, Male Connection Straight Swivel

Straight swivel head (male connection) RV adapter to fit most sewer outlets on campers and trailers

Splash Guard Marine Pump Out Nozzle

Universal marine adapter only with splash guard. Pump out attachment for recreational marine bilge tank pump outs.

Universal Marine Pump Out Assembly – Diaphragm Pumps

A complete hose and nozzle assemble for pumping out recreational boats of all sizes.

Universal Marine Pump Out Assembly – Vacuum Pumps

A complete hose and nozzle assemble for pumping out recreational boats of all sizes.

RV 45 DEGREE SEWER ADAPTER, 2″ MALE CAMLOCK

Universal RV Sewer Adapter with a 45 degree angle for pumping out grey and black water tanks from RV’s and campers.

RV Sewer Adapter, Straight Swivel

Swivel head RV adapter to fit most sewer outlets on campers and trailers

Trash Pump Parts

Wastecorp is a manufacturer and supplier of parts for trash pumps and self priming centrifugal pumps. We offer mechanical seals, impellers, bearing rod ends and overhaul kits for many makes and models of self primers.

Models

Impeller

Trash pump spare parts kit

Mechanical seal for trash pump

Source: wastecorp.com

Read More Articles:

• versamatic-diaphragm-pump
• wago-high-tech-for-industry-and-buildings
• airtech-vacuum-pumps
• obl-blackline-h-series-plunger-and-mechanical-diaphragm
• sc-hydraulic-engineering-l3-compact-liquid-pumps