Description of Gastec WP-133 Waste Water Test Kit Enables concentrations of organic chlorinated solvents (e.g. tetrachloroethylene, trichloroethylene) present in wastewater to be easily measured. *We also have the Wastewater test kit WPT-132 / WPT-133 / WPT-135 which includes the Gas sampling pump GV-100 instead of the Plastic syringe pump. Detector Tube The substance to be […]
Description of Gastec Gastec WP-135 Waste Water Test Kit Enables concentrations of organic chlorinated solvents (e.g. tetrachloroethylene, trichloroethylene) present in wastewater to be easily measured. *We also have the Wastewater test kit WPT-132 / WPT-133 / WPT-135 which includes the Gas sampling pump GV-100 instead of the Plastic syringe pump. Detector Tube The substance to […]
Description of Gastec 380 Fumigation Probe Measurements inside a container. The GASTEC Fumigation Probe is connected to the Gas Detector Tube and inserted through the rubber seal of the closed container to measure residual fumigants. Currently, applicable tubes are limited. Specification of Gastec 380 Fumigation Probe Total length Total length of probe: 44 ? / […]
Description of Shanceng Gas Meter G2.5 Shancheng industrial diaphragm gas meters G6/G10/G16/G25/G40/G65/G100 is a gas volume measurement instruments for coal gas, natural gas, LPG, and all non-corrosive gases. It is designed and developed according to world-advanced technology, based on our rich experience, with the merits of small size, lightweight, accurate measurement, high sensibility, and low […]
Description of Thincke Gas Cylinder Level Sensor Gas Cylinder Level Sensor is a device for measuring the residual liquid level of the gas cylinder propane bottle. Gas Cylinder Level Sensor is a non-invasive level sensor. Instead of drilling holes into the gas cylinder, you can easily measure the remaining level height or volume by attaching […]
Description Eska EMV Series Mechanical Actuated Seismic Valve is a shut-off valve that is activated during seismic oscillation. Activation and non-activation waves are defined in TS 12884 Turkish Standard. This Turkish standard is created based on the ANSI Z11 standard in the United States. Once the mechanical actuation system senses the seismic oscillation, the valve […]