Dinel FLD–32 Thru-Wall Level Switch “Flexi Watch” is designed for an indication of the presence of (conductive or non-conductive) liquids in glass or plastic vessels. The sensitivity and switching mode can simply be set up using the “programming” wire or magnetic pen, depending on the type of sensor used. The sensor housing is made of […]
Description Dinel CLS–23S Submersible Level Sensor is developed as a reliable and low-cost solution for limit level sensing of water (or water solutions) with miniature outer dimensions without the needs of any adjustment. It fully replaces the old type CLS–18S. The connection is done by means of two wires directly to a circuit with a […]
Description Dinel DLS – 27 Capacitive Level Sensors are designed for limit sensing of the level of liquid and bulk solids in tanks, sumps, tubes or, hoppers, silos, etc. The sensors are manufactured in several modifications of sensing electrodes (rod and rope). The electrodes can be given an insulating coating, a useful feature in case […]
Dinel ULS-53 Ultrasonic Level Meter is compact measurement devices containing an ultrasonic transmitter and an electronic module. Using a transmitter, the level sensor transmits the series of ultrasonic pulses that spread towards the level surface. The transmitter receives reflected acoustic waves that are subsequently processed in the electronic module. Based on the period during which the […]
Description Dinel GPLS-25 Thru-Wall non contact Level Switches is intended for liquid (conductive and non-conductive) level detection on glass or plastic gauge-pipes, tubes, and tanks. The sensitivity and modes (SO – normally open or SC – normally closed) of the switches can be easily set by placing a magnetic pen on a sensitive spot. The […]
Dinel RFLS-28 High Frequency Level Sensors is intended for industrial use for limit level sensing of liquid and pastes media. It is designed for vertical mounting in the tank or using a tubular extender (see the technical datasheet for accessories) or a bracket. It can directly replace vibrating level sensors, or capacitive level sensors in […]






