Description For in-situ verification of flow meters in the field, Energoflow AG offers a range of transferable standards sets. These sets comprise of pre-calibrated flow meters, flow conditioners, and straight runs in an easily transportable case. They can be used for proving flow meters by comparison method in the field without de-mounting. Transferable Flow Metering […]
Description Gas Meter HORN is designed to measure the volume of natural gas or regasified hydrocarbon gas for households and public utilities adjusting the measured gas volume, and displaying the amount of consumed gas on the meter indicator with the ability to transfer information to a centralized accounting system. The meter is intended for continuous […]
Description Four-channel Ultrasonic Gas Flow Meter Energoflow GFE-404 is MID certified, ATEX specially designed for applications where very high accuracy is required, e.g. for custody transfer measurement of natural gas. The standard version provides an accuracy of 0.5%, flow meters with an accuracy of 0.2% can be supplied under the order. Ultrasonic Gas Flow Meter […]
Description Energoflow Ultrasonic Gas Flow Meter are flanged section type flowmeters specially designed for measuring flow velocity, volumetric flow rate and volume of gaseous substances (gases) transported through pipelines in the forward or reverse direction at high pressure (upto 16 Mpa), eg. at gas wells and underground gas reservoirs. Energoflow GFE-201H, Energoflow GFE-202H can measure the […]
Descriptions Energoflow AG Metering Complexes for Custody Transfer a high accuracy two-channel ultrasonic gas flow meter GF202 with straight meter runs and flow conditioner, Flow computer for volume correction as per customer’s requirements, absolute pressure sensor /transmitter (accuracy not worse than 0,075%), temperature sensor Pt100/temperature transmitter, Cabinet mounted uninterrupted power supply with a communication interface […]
Overview Energoflow EFS-R Reference Rotary Gas Meters is intended for installation on reference calibration rigs for calibration and verification of gas meters of any type with air as the operating environment. The meters are equipped with an electronics unit (EU) and rotary transducer with mounted binary pulse-frequency sensors and pressure sensors. The meter EFS-R is intended […]