Encoder ENCO 08 Totalizer Index

Description

ENCO 08 Totalizer Index Magnetic “absolute encoder” Continuous operation without external power supply Custody transfer transmission of meter readings in accordance with the data protocol as per DSfG-AK “Primary devices with a digital interface” Maintenance-free Totalizer reading in non-volatile memory Totalizer settable digitally by PC software Insensitive to humidity and soiling High shock and vibration resistance Version ENCO 08 in the meter head of the TRZ 03 and ENCO 08-M for installation on a mechanical drive shaft acc. to EN 12261

ENCO 08 Totalizer Index Features

  • Magnetic “absolute encoder”
  • Continuous operation without external power supply
  • Custody transfer transmission of meter readings in accordance with the data protocol as per DSfG-AK “Primary devices with a digital interface”
  • Maintenance free
  • Totalizer reading in non-volatile memory
  • Totalizer settable digitally by PC software
  • Insensitive to humidity and soiling
  • High shock and vibration resistance
  • Version ENCO 08 in the meter head of the TRZ 03 and ENCO 08-M for installation on a mechanical drive shaft acc. to EN 12261

ENCO 08 Totalizer Index Specifications

When a volume corrector is attached, it also provides the necessary provision for the digital transmission of measurement readings (EZD protocol). The serial interface of the NAMUR is one-way and reaction-free. Entry to this and other current applications is only available by removing a lock. The ENCO 08 is set to run function.

The original criteria (e.g. “set totalizer read”) are already carried out by the licensed RMG calibration center in the factory. There is also no need for more criteria during on-site commissioning. The circuitry consists of the Wiegand power-generating sensor (Wegand sensor module), the counting logic (ASIC and Hall sensor) and the FRAM clock.

Other Article:

author

Rudy Wiratama

rudywinoto.com/wmablog.com/flowmasonic.com

Similar Posts