Introduction
Fluidwell F113 Flow rate Monitor / Totalizer is a versatile flow rate indicator/transmitter and totalizer with a continuous flow rate monitoring feature.
It offers the ability to set two low flow rates and two high flow rate alarm values. If desired, an alarm ignores function that can be set up to allow for an incorrect flow rate for a certain period of time. Up to five outputs are available to transmit flow rate, alarm conditions, and accumulated total.
The display shows flow rate, total, accumulated total, alarm values, alarm messages, and status. On-screen engineering units are easily configured from a comprehensive selection.
Fluidwell F113 Advantages
- Robust aluminum or stainless steel 316L field enclosure (IP66, IP67 / NEMA Type4X).
It is so rugged, a truck can even stand on it! - Intrinsically Safe available – ATEX and IECEx approval for gas and dust applications.
- Familiar easy operation with the Fluidwell “Know one, know them all” configuration structure, saving time, cost and aggravation.
- Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.
Features
- Flow rate monitoring: four alarm values can be set: low-low, low, high and high-high flow rate alarm.
- Alarm values can be changed by the operator or they can be password protected.
- Alarm ignore function allows an incorrect flow rate for a certain period of time.
- Analog and pulse outputs.
- Displays total and flow rate simultaneously.
- Large digit selection for flow rate or total.
- Flow rate: seven 17mm (0.67″) or 8mm (0.31″) digits.
- Total – resettable: seven 17mm (0.67″) digits.
- Accumulated total – not resettable: eleven 8mm (0.31″) digits.
- Separate engineering units for flow rate and total on the display.
- Up to four configurable alarm or scaled pulse outputs.
- Displays clear alarm messages.
- LED backlight.
- Intrinsically safe according to ATEX and IECEx.
- GRP, Aluminum or high-grade stainless steel enclosure.
- Auto backup of settings and running totals in EEPROM memory.
- Ambient temperature: -40°C to +80°C (-40°F to 176°F).
- Remote control input to reset total or to lock the “clear total” button.
- Various accessories are available for this product.
Applications
- Liquid flow measurement where continuous flow rate monitoring is important.
- If re-transmission of the flow rate and/or totalizer functions or serial communication is required.
- The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).
Fluidwell F113 Specification
Signal Inputs
- Flowmeter Inputs
- Pulse-type inputs:
Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. - (0)4 – 20mA.
- Pulse-type inputs:
- Status Inputs
- Remote control: external reset for clearing total or to disable manual clearing by the keypad.
Signal Outputs
- Pulse outputs
- Function: Scaled pulse output according to accumulated total (e.g. a pulse every 3.25 gallons).
Max. frequency: 500Hz.
Adjustable pulse length from 0.001 sec. to 9.999 seconds. - Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.
- Function: Scaled pulse output according to accumulated total (e.g. a pulse every 3.25 gallons).
- Alarm outputs
- None
- Analog outputs
- Function: Re-transmitting the linearized flow rate – the output can be scaled to any range (e.g. 200 L/min to 1200 L/min).
- Type: One passive isolated, floating or loop powered 4 – 20mA output or one active (0)4 – 20mA or 0 – 10V DC output.
Supply
- Power Supply
- Long-life Lithium battery.
- 4 – 20mA, input Loop-powered.
- 8 – 24V AC/DC.
- 115 – 230V AC.
- Basic: 8 – 30V DC.
- Sensor Supply
- 3.2, 8.2, 12, 24V DC.
Hazardous Area
- Intrinsically Safe
- ATEX:
Gas: II 1 G Ex ia IIC T4 Ga
Dust: II 1 D Ex ia IIIC T100°C Da - IECEx:
Gas: Ex ia IIC T4 Ga
Dust: Ex ia IIIC T100°C Da - CSA:
I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4 - FM:
I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4
- ATEX:
- Explosion Proof
- ATEX:
Gas: II 2 G / Ex d IIB T5 Gb
Dust: II 2 D / Ex t IIIB T100°C Db
- ATEX:
Communication
- Modbus communication is available on F1-Series products.
- HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.
Download Datasheet: Fluidwell F113 Flow Rate Indicator
For more info and price please contact marketing@wmablog.com
Other Article:
- Fluidwell F490 Loop Powered Multi Purpose Indicator
- Fluidwell F133 Intrinsically Safe Delivery Controller / Dispenser
- Fluidwell F130 Batch Flow Control
- Fluidwell F Series Flow Display and Level Control
- Fluidwell F119 Flow rate Indicator with receipt printer driver
- Fluidwell Display, Indicator, Totalizer, and Batch Control for Flow and Level
- Fluidwell F Series Flow Display and Level Control
- Cartridge Fuse General Duty Safety Switch
- Fluidwell Display, Indicator, Totalizer and Batch Control for Flow and Level Meter
- Fluidwell B Series Basic Flow Indicator
- Fluidwell D Series DIN Panel Mount Flow Indicator
- Battery Powered Flow Rate Transmitter RT-10 Series AW Lake
- KEPmeter ST1-MANIFOLD-FC-2 Channel Manifold Controller
- Hengesbach Level Module NC1 Series
- Fluidwell E Series Explosion Proof
- Fluidwell N Series Batch Controlle
- Flow Computer, Batch Control, Flow Indicator and Level Indicator Fluidwell
You must be logged in to post a comment.